Homemory HXQST12-BS

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Homemory Mini Submersible LED Lights

Model: HXQST12-BS

Introduction

Thank you for choosing Homemory Mini Submersible LED Lights. These versatile, battery-operated lights are designed for various decorative applications, both underwater and on dry surfaces. With an IP68 waterproof rating and long-lasting batteries, they are ideal for enhancing vases, pools, ponds, aquariums, and event decorations.

This manual provides essential information for the safe and effective use of your submersible LED lights. Please read it thoroughly before operation and retain it for future reference.

Safety Information

WARNING: Button cell battery included. Keep out of reach of children. Please do not swallow or place it inside any part of the body! Seek medical attention immediately if you think the batteries may have been swallowed or placed inside any part of the body. Prevent children from getting tangled when close to the candles.

  • Ensure the light is securely sealed before submerging in water to prevent water damage and ensure proper function.
  • Do not expose batteries to excessive heat or dispose of them in fire.
  • Replace batteries only with the specified type (CR2032).
  • Dispose of used batteries responsibly according to local regulations.
Battery warning label and child safety icon
Image: Battery warning label indicating button cell battery hazard and child safety precautions.

Package Contents

Your Homemory Mini Submersible LED Lights package includes:

  • 12 x Homemory Mini Submersible LED Lights (White)
  • 24 x CR2032 Batteries (pre-installed, 2 per light)

Setup and Battery Installation

The lights come with batteries pre-installed. To activate and ensure waterproof sealing, follow these steps:

  1. Open the Light: Gently twist the top and bottom halves of the light counter-clockwise until they separate.
  2. Remove Insulation Tab: Locate the small paper disc or plastic tab between the batteries. Remove this tab to allow electrical contact.
  3. Close and Activate: Align the top and bottom halves, then twist clockwise firmly until the light illuminates and the seal is tight. Ensure the O-ring is properly seated to maintain the IP68 waterproof rating.
Diagram showing how to open, remove paper disc, and close the submersible LED light
Image: Step-by-step guide on opening the light, removing the battery insulation tab, and twisting to activate and seal.
Exploded view of submersible LED light components: ABS shell, PCB, CR2032 battery, waterproof ring
Image: Detailed view of the light's components, including the ABS shell, PCB, CR2032 batteries, and the waterproof O-ring.

Operating Instructions

These lights are designed for simple operation:

  • Turning On: Twist the top and bottom halves clockwise until the light illuminates and is securely sealed.
  • Turning Off: Twist the top and bottom halves counter-clockwise until the light turns off.
  • Placement: Once activated and sealed, place the lights in your desired location, whether submerged in water or on a dry surface.

The lights emit a warm white glow. For optimal waterproof performance, always ensure the light is twisted tightly closed before placing it in water.

Usage Examples

Submersible LED lights illuminating a glass vase with water and flowers
Image: Lights used for glass vase decoration, creating a centerpiece.
Submersible LED lights placed in a fish tank with fish and aquatic plants
Image: Lights enhancing a fish tank, providing underwater illumination.
Submersible LED lights in an ice bucket with bottles of champagne
Image: Lights used in an ice bucket for decorative lighting at events.
Submersible LED lights in glasses of water with ice and cucumber slices, set on a table
Image: Lights used as wedding or dinner table decor, submerged in drinks.
Submersible LED lights decorating pumpkins and stairs for Halloween
Image: Lights used for Halloween decoration, illuminating pumpkins and pathways.

Video: Demonstration of Homemory Submersible LED Lights in various decorative settings, highlighting their waterproof feature and ease of use.

Maintenance

  • Battery Replacement: When the light dims or stops working, it's time to replace the batteries. Twist the light counter-clockwise to open. Remove the old CR2032 batteries and insert two new CR2032 batteries, ensuring correct polarity. Twist clockwise to seal and activate.
  • Cleaning: Wipe the lights with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: If storing for an extended period, remove the batteries to prevent leakage and corrosion. Store in a cool, dry place.

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.
  • Insulation tab not removed.
  • Batteries are dead or inserted incorrectly.
  • Light not twisted tightly enough.
  • Open the light and remove the paper insulation tab.
  • Replace batteries with new CR2032 cells, ensuring correct polarity (+ side up).
  • Twist the light firmly clockwise until it illuminates.
Water inside the light.
  • Light not sealed properly.
  • O-ring is damaged or misplaced.
  • Ensure the light is twisted tightly closed before submerging.
  • Check the O-ring for proper seating and damage. Replace if necessary.
  • Allow the light to dry completely before re-use or battery replacement.
Light dims quickly.
  • Batteries are low.
  • Replace both CR2032 batteries with new ones.

Specifications

  • Model: HXQST12-BS
  • Dimensions: 1.18"D x 1.18"W x 0.98"H (approx. 3cm D x 3cm W x 2.5cm H)
  • Weight: 0.17 Kilograms (total for 12 lights, approx. 5.9 ounces)
  • Material: Plastic (ABS Shell)
  • Light Source: LED
  • Light Color: Warm White
  • Power Source: Battery Powered (2 x CR2032 per light)
  • Battery Life: Up to 150+ hours (consistent use)
  • Water Resistance: IP68 Level Waterproof
  • Voltage: 6 Volts
  • Included Components: Batteries (pre-installed)
  • Indoor/Outdoor Usage: Outdoor/Indoor

Warranty and Support

For warranty information or product support, please contact Homemory customer service through the retailer where the product was purchased or visit the official Homemory brand store online. Please have your model number (HXQST12-BS) and purchase details ready.

Homemory Store: Visit Homemory Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.