Introduction and Overview
This manual provides essential instructions for the safe and effective use of your Eveready LED Floating Lantern Flashlight, Model EVGPLN451CT. This battery-powered LED lantern is designed for versatile use, including emergency preparedness, outdoor activities, and general illumination.
Key features of your Eveready Floating Lantern include:
- Flexible lighting solution that operates on 2 or 4 D batteries.
- Extended runtime of up to 400 hours when using 4 heavy-duty D batteries.
- Bright-white LED technology, offering a lifespan four times longer than standard LEDs.
- Designed to float for easy recovery in water.
- Equipped with a large reflector for a broader beam of light.
Setup: Battery Installation
Your Eveready LED Floating Lantern requires 2 or 4 D-cell alkaline batteries for operation. For optimal performance and maximum runtime, 4 heavy-duty D batteries are recommended.
- Unscrew the front bezel of the lantern by turning it counter-clockwise.
- Carefully remove the lens and reflector assembly.
- Insert 2 or 4 D-cell alkaline batteries into the battery compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
- Replace the lens and reflector assembly, then screw the front bezel back on clockwise until secure. Do not overtighten.
Operating Instructions
To operate your Eveready LED Floating Lantern:
- Locate the power button on the handle of the lantern.
- Press the power button once to turn the lantern ON.
- Press the power button again to turn the lantern OFF.
The ergonomic body design ensures a comfortable grip during use, and the large reflector provides a wide, bright beam suitable for various lighting needs.
This lantern is designed to float, making it easy to retrieve if dropped in water. However, it is important to note that the product is Not Water Resistant and should not be submerged or used as an underwater light source.
Maintenance
To ensure the longevity and optimal performance of your Eveready LED Floating Lantern:
- Battery Replacement: Replace all batteries at the same time. Do not mix old and new batteries, or different types of batteries. Refer to the 'Setup: Battery Installation' section for detailed steps.
- Cleaning: Wipe the exterior of the lantern with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the lantern is dry before storage or next use.
- Storage: If the lantern will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device. Store in a cool, dry place.
Troubleshooting
If your Eveready LED Floating Lantern is not functioning as expected, consider the following:
- Light does not turn on:
- Check if the batteries are inserted correctly with the proper polarity.
- Replace old or depleted batteries with new D-cell alkaline batteries.
- Ensure the front bezel is securely tightened. A loose bezel can prevent electrical contact.
- Dim light output:
- Batteries may be low. Replace with fresh D-cell alkaline batteries.
- Ensure the lens is clean and free from dirt or smudges.
Specifications
| Feature | Detail |
|---|---|
| Model Number | EVGPLN451CT |
| Power Source | Battery Powered (2 or 4 D-cell Alkaline) |
| Light Source Type | LED |
| Material | Plastic |
| Color | Yellow |
| Voltage | 6 volts |
| Runtime (with 4 D batteries) | Up to 400 hours |
| Water Resistance Level | Not Water Resistant (Designed to float) |
| Included Components | ReadyFlex LED Floating Lantern |
| UPC | 039800137166 |
Warranty and Support
This product comes with a manufacturer's warranty covering parts. For specific details regarding warranty coverage and claims, please refer to the packaging or contact Eveready customer support.
For additional product information or support, please visit the official Eveready store: Eveready Store.
