1. Introduction
Thank you for choosing the Mobo Howe ANC Bluetooth Over-Ear Headphones. These headphones are designed to provide a high-quality audio experience with the convenience of wireless connectivity and Active Noise Cancellation (ANC). This manual will guide you through the setup, operation, and maintenance of your new headphones.
2. Package Contents
- Mobo Howe ANC Bluetooth Over-Ear Headphones
- Charging Cable
- User Manual
3. Product Overview
Familiarize yourself with the components and controls of your Mobo Howe ANC headphones.
Figure 3.1: Front view of the Mobo Howe ANC headphones, showcasing the earcups and headband.
Figure 3.2: Side view of the headphones, highlighting the control panel on the earcup, including the ANC switch and charging port.
Figure 3.3: The headphones in a folded position, demonstrating their portability for storage or travel.
Key Components:
- Power Button: Used to turn the headphones on/off and initiate Bluetooth pairing.
- ANC Switch: Activates or deactivates the Active Noise Cancellation feature.
- Volume/Track Controls: Touch controls for adjusting volume and skipping tracks.
- Multi-function Button: For play/pause, answering/ending calls.
- Microphone: Integrated for hands-free calling.
- Charging Port: USB port for charging the headphones.
- LED Indicator: Displays power, pairing, and charging status.
4. Setup
4.1. Charging the Headphones
- Connect the charging cable to the charging port on the headphones.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, wall adapter).
- The LED indicator will show the charging status. It typically turns red while charging and blue or off when fully charged.
- Allow approximately 2-3 hours for a full charge.
4.2. Bluetooth Pairing
- Ensure the headphones are fully charged.
- Press and hold the Power Button for approximately 3-5 seconds until the LED indicator flashes blue and red alternately, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth.
- Search for new Bluetooth devices. Select "Mobo Howe ANC" from the list of available devices.
- Once connected, the LED indicator will typically flash blue slowly or turn solid blue.
- If prompted for a password, enter "0000".
5. Operating Instructions
5.1. Power On/Off
- Power On: Press and hold the Power Button for 3 seconds. The LED indicator will light up.
- Power Off: Press and hold the Power Button for 3 seconds. The LED indicator will turn off.
5.2. Active Noise Cancellation (ANC)
- Locate the ANC switch on the earcup.
- Activate ANC: Slide the ANC switch to the 'ON' position. A dedicated LED indicator for ANC may light up.
- Deactivate ANC: Slide the ANC switch to the 'OFF' position.
5.3. Music Playback
- Play/Pause: Tap the Multi-function Button once.
- Volume Up: Tap the 'Volume Up' touch control.
- Volume Down: Tap the 'Volume Down' touch control.
- Next Track: Press and hold the 'Volume Up' touch control.
- Previous Track: Press and hold the 'Volume Down' touch control.
5.4. Call Management
- Answer/End Call: Tap the Multi-function Button once.
- Reject Call: Press and hold the Multi-function Button for 2 seconds.
- Redial Last Number: Double-tap the Multi-function Button.
6. Maintenance
6.1. Cleaning
- Wipe the headphones with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, solvents, or spray cleaners.
- Avoid getting moisture into any openings.
6.2. Storage
- Store the headphones in a cool, dry place away from extreme temperatures and direct sunlight.
- When not in use for extended periods, charge the headphones at least once every three months to preserve battery life.
7. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Headphones do not power on. | Ensure the headphones are charged. Connect to a power source and try again. |
| Cannot pair with device. | Ensure headphones are in pairing mode (flashing blue/red). Turn off and on Bluetooth on your device. Move headphones closer to the device. |
| No sound or low volume. | Check volume levels on both headphones and your connected device. Ensure headphones are properly paired. |
| ANC not working effectively. | Ensure the ANC switch is in the 'ON' position. Adjust headphone fit for a better seal around your ears. |
| Call quality is poor. | Ensure the microphone is not obstructed. Move to an area with less background noise. Check device's network signal. |
8. Specifications
- Model Name: Mobo Howe ANC
- Model Number: AUDBLTHOWEANCNEGRO
- Connectivity Technology: Wireless (Bluetooth)
- Wireless Communication Technology: Bluetooth
- Control Method: Touch
- Noise Control: Acoustic Isolation (Active Noise Cancellation)
- Color: Black
- Form Factor: Over-Ear
- Compatible Devices: Bluetooth-enabled devices
- Special Features: Noise Isolation, Integrated Microphone
9. Safety Information
- Do not expose the headphones to extreme temperatures, humidity, or liquids.
- Avoid dropping or subjecting the headphones to strong impacts.
- Do not attempt to disassemble or modify the headphones. This will void the warranty.
- Listen at moderate volume levels to prevent hearing damage.
- Use caution when using headphones in situations requiring awareness of surroundings.
10. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact Mobo customer service through their official website. Keep your proof of purchase for warranty claims.
