1. Introduction
Thank you for choosing the PRISMXR Carina D1 Charging Dock. This product is designed to provide a convenient and efficient charging and storage solution for your Meta Quest 3 headset and its controllers. It features a magnetic charging system, fast charging capabilities, and broad compatibility with various head strap types. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your device.
2. Safety Information
To prevent damage to the product or injury to yourself and others, please observe the following safety precautions:
- Do not disassemble, repair, or modify the device.
- Keep the device away from water, moisture, and extreme temperatures.
- Use only the provided power adapter and cable.
- Ensure proper ventilation around the charging dock during operation.
- The charging dock is equipped with over-current, over-voltage, overheat, and overcharge protection mechanisms to ensure safe charging. However, always monitor the charging process.
- Avoid placing metallic objects on the charging contacts.
3. Package Contents
Verify that all items are present in your package:
- PRISMXR Carina D1 Charging Dock
- Power Adapter (30W)
- USB-C Charging Cable
- 2 x Rechargeable AA Batteries (1800mAh)
- 2 x Controller Battery Covers
- Headset Magnetic Charging Connector
- Adjustable Rear Headstrap Support
- Quick Start Guide
Image: All components included in the PRISMXR Carina D1 Charging Dock package, including the dock, power adapter, USB-C cable, rechargeable batteries, controller covers, magnetic connector, and headstrap support.
4. Product Overview
The PRISMXR Carina D1 Charging Dock is designed for seamless integration with your Meta Quest 3. Its 'Nest Bionic' design provides a compact and organized space for your VR equipment.
Image: The PRISMXR Carina D1 Charging Dock with a Meta Quest 3 headset securely placed for charging and storage.
Key Features:
- FlexiDock Charging Solution: An innovative magnetic and flexible pin charging solution ensures easy and reliable charging for the Quest 3 headset without precise alignment. The magnetic pin head can pivot up to 17 degrees and has an adjustable vertical stretch of up to 5mm, automatically attaching when the headset nears the dock's pin.
- SuperFast Charge: Equipped with a standard fast-charging adapter, the dock ensures full-speed charging for your Quest 3 headset and controllers.
- Nest Bionic Charging Design: Inspired by natural nests, this design offers compact packaging for a well-organized space, simultaneously charging the headset and controllers.
- Sleep-Friendly: LED indicators can be turned off for a peaceful sleep while devices continue to charge.
- Stable and Secure: Built-in over-current, over-voltage, overheat, and overcharge protection ensure safety and reliability.
Image: Visual representation of the key features of the PRISMXR Carina D1 Charging Dock.
5. Setup Instructions
Follow these steps to set up your PRISMXR Carina D1 Charging Dock:
- Connect Power: Plug the USB-C charging cable into the back of the charging dock and connect the other end to the provided 30W power adapter. Plug the adapter into a wall outlet.
- Install Controller Batteries: Open the battery compartment on each Meta Quest 3 controller. Insert the provided 1800mAh rechargeable AA batteries and replace the original battery covers with the PRISMXR controller battery covers.
- Attach Headset Magnetic Connector: Carefully attach the magnetic charging connector to the USB-C port of your Meta Quest 3 headset. Ensure it is firmly seated.
- Adjust Headstrap Support (Optional): If using an elite-type or halo-type strap, attach the adjustable rear headstrap support to the dock and adjust its height to properly support your headset.
- Place Devices on Dock: Gently place your Meta Quest 3 headset onto the central charging pin of the dock. The magnetic connection will automatically engage. Place the controllers into their designated slots on either side of the headset.
Image: Illustrates the process of installing the included rechargeable batteries into the Meta Quest 3 controllers.
Image: The charging dock demonstrating its compatibility with original, elite, and halo straps, featuring an adjustable rear support for different headset configurations.
6. Operating Instructions
Charging Your Devices:
Once your headset and controllers are correctly placed on the dock, charging will begin automatically. The LED indicators on the front of the dock will provide charging status:
- Orange LED: Device is currently charging.
- Green LED: Device is fully charged or in standby mode.
Charging Times:
- Meta Quest 3 Headset: Approximately 1 hour and 50 minutes for a full charge.
- Meta Quest 3 Controllers: Approximately 2 hours and 30 minutes for a full charge.
Image: Demonstrates the fast charging capabilities of the dock, showing approximate charging times for the headset and controllers.
Sleep-Friendly Mode:
To turn off the LED indicators for a peaceful environment, especially at night, press the designated button on the dock (refer to the Quick Start Guide for exact location). The devices will continue to charge normally.
Image: The charging dock in a low-light environment, illustrating the sleep-friendly feature where LED indicators can be disabled.
7. Compatibility
The PRISMXR Carina D1 Charging Dock is designed for broad compatibility:
- Headset Straps: Compatible with the original Meta Quest 3 strap, as well as most elite-type and halo-type aftermarket straps.
- Accessories: Compatible with facial covers, anti-leakage nose pads, and PRISMXR controller grips.
- Incompatible Accessories: Please note that the dock may not be compatible with certain controller grips covers or full shell covers for the headset, as these might interfere with proper seating or charging connections.
Image: The charging dock accommodating Meta Quest 3 headsets with various strap types, including original, elite, and halo straps.
8. Maintenance
To ensure the longevity and optimal performance of your charging dock:
- Cleaning: Use a soft, dry cloth to wipe the surface of the dock. Do not use abrasive cleaners or solvents.
- Storage: Store the dock in a cool, dry place away from direct sunlight when not in use for extended periods.
- Contacts: Periodically check the charging contacts for any dust or debris and gently clean them if necessary.
9. Troubleshooting
If you encounter issues with your PRISMXR Carina D1 Charging Dock, refer to the following common problems and solutions:
- Device Not Charging:
- Ensure the power adapter is securely plugged into both the wall outlet and the charging dock.
- Verify that the headset and controllers are correctly seated on their respective charging contacts. The magnetic connection for the headset should feel secure.
- Check the LED indicators; if they are off, ensure the power is connected.
- For controllers, ensure the PRISMXR battery covers are correctly installed and the rechargeable batteries are properly inserted.
- Slow Charging:
- Ensure you are using the original 30W power adapter and USB-C cable provided with the dock. Third-party cables or adapters may not support fast charging.
- Avoid charging in extremely hot environments, as this can affect charging efficiency.
- LED Indicators Not Working:
- Check if the sleep-friendly mode is activated (LEDs turned off). Press the LED control button to toggle them on/off.
- Ensure the dock is receiving power.
- Unstable Connection/Intermittent Charging:
- Ensure the magnetic charging connector on the headset is clean and free of debris.
- Confirm the headset is placed centrally and firmly on the charging pin. The flexible pin is designed to accommodate slight variations, but a solid initial placement is key.
- If using a third-party headset strap or accessory, ensure it does not obstruct the headset's proper seating on the dock.
If the problem persists after attempting these solutions, please contact PRISMXR customer support for further assistance.
10. Specifications
| Product Dimensions | 8.86 x 8.86 x 4.33 inches |
| Item Weight | 2.64 pounds |
| Model Number | Carina D1 for Quest 3 |
| Brand | PRISMXR |
| Compatible Devices | Meta Quest 3 |
| Connector Type | 8-Pin (Magnetic) |
| Included Components | 2 Rechargeable AA Batteries |
| Special Features | Charging Indicator, Fast Charging, Magnetic, Short Circuit Protection |
| Color | White |
| Total USB Ports | 1 (for power input) |
| Wattage | 27W (Max output) |
11. Warranty and Support
PRISMXR products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official PRISMXR website.
For technical support, troubleshooting assistance, or warranty claims, please contact PRISMXR customer service through their official website or the contact information provided in your product documentation. Please have your product model number and purchase date ready when contacting support.
