HoneyGuaridan Automatic Pet Feeder User Manual

Introduction

Thank you for choosing the HoneyGuaridan Automatic Pet Feeder. This device is designed to provide convenient and reliable feeding for your cats and dogs, ensuring they receive their meals on schedule. It features programmable feeding times, portion control, voice recording, and dual power supply options for peace of mind. Please read this manual carefully before use to ensure proper operation and maintenance.

Safety Information

• This appliance is for indoor use only.
• Do not immerse the main unit in water or any other liquid.
• Keep out of reach of children and pets when not in use or during assembly.
• Use only dry pet food with a kibble size between 0.19 and 0.47 inches (0.5-1.2 cm) to prevent jamming.
• Ensure the power adapter cable is not chewed by pets.
• Always unplug the feeder before cleaning.
• Do not use abrasive cleaners or harsh chemicals.

Package Contents

• Automatic Pet Feeder Main Unit
• Food Container (6L capacity)
• Lid with Desiccant Compartment
• Food Dispenser Base
• Two-way Food Splitter
• 2 Stainless Steel Bowls
• Power Adapter
• User Manual

Product Overview

Familiarize yourself with the components of your new pet feeder:

HoneyGuaridan Automatic Pet Feeder with two stainless steel bowls, filled with dry pet food.

• Food Container: Transparent container for storing dry pet food.
• Control Panel: Digital display and buttons for programming and operation.
• Dispenser Outlet: Where food is dispensed.
• Two-way Splitter: Divides food into two bowls (removable for single bowl use).
• Stainless Steel Bowls: Removable bowls for pet food.
• Power Port: For connecting the power adapter.
• Battery Compartment: Located at the bottom for backup power.

Setup

1. Unpacking and Assembly

1. Remove all components from the packaging.
2. Place the main unit on a flat, stable surface.
3. Attach the food container to the main unit, ensuring it is securely seated.
4. Insert the two-way food splitter into the dispenser outlet if you intend to use two bowls. If using one bowl, omit this step.
5. Place the stainless steel bowls under the dispenser outlets.

Visual representation of the 6L capacity and the feeder's dimensions. Shows how the food container can be removed for cleaning and how to switch between two bowls and one bowl setup by removing the two-way splitter.

2. Power Supply

The feeder supports dual power supply for continuous operation.

• Adapter Power: Connect the power adapter to the feeder's power port and plug it into a wall outlet.
• Battery Backup: For backup power during outages, install 3 x D-size batteries (not included) into the battery compartment at the bottom of the unit. It is recommended to use both power sources simultaneously.

Diagram showing the dual power options: D batteries (not included) and power adapter, ensuring continuous operation even during power outages.

3. Filling the Food Container

1. Open the lid of the food container.
2. Pour dry pet food into the container. Ensure the kibble size is appropriate (0.19-0.47 inches).
3. Place the desiccant packet into the designated compartment on the underside of the lid to maintain food freshness.
4. Close the lid securely to keep food fresh and prevent pets from accessing it.

Image showing the desiccant compartment on the lid, designed to keep food fresh and dry. Comparison of kibble with and without desiccant.

Operating Instructions

1. Control Panel Overview

The control panel features a digital display and several buttons for programming:

• MENU Button: Enters programming mode and confirms settings.
• UP/DOWN Buttons: Adjust values (time, portions, meals).
• RECORD Button: Records or plays voice messages.
• MANUAL FEED Button: Dispenses food manually.
• LOCK Button: Prevents accidental button presses.

2. Setting the Current Time

1. Press and hold the MENU button until the hour digit flashes.
2. Use the UP/DOWN buttons to set the current hour.
3. Press MENU to confirm and move to the minute setting.
4. Use the UP/DOWN buttons to set the current minute.
5. Press MENU to save the time setting.

3. Programming Feeding Schedule

You can program up to 6 meals per day.

Diagram illustrating timed feeding options: 1-6 meals per day, 0-24 portions per meal, with 1 portion approximately 6g. A cat is shown eating from the feeder.

1. Press the MENU button repeatedly until 'Meal 1' appears on the display.
2. Use UP/DOWN to set the desired feeding time for Meal 1 (hour then minute). Press MENU after each setting.
3. Next, set the number of portions for Meal 1 (1-24 portions). One portion is approximately 5-6 grams, depending on kibble size. Use UP/DOWN and press MENU.
4. Repeat steps 2-3 for 'Meal 2' through 'Meal 6' as needed. If a meal is not set, it will not dispense food.
5. After setting all desired meals, press MENU to exit programming mode.

4. Voice Recording

Record a 10-second voice message to call your pets at meal times.

Illustration of the voice recording feature, allowing users to record a 10-second message to call pets for meals. Shows scenarios like working, business trips, and travel where this feature is useful. A cat is shown near the feeder.

1. Press and hold the RECORD button until you hear a beep.
2. Speak your message into the microphone (located near the control panel) within 10 seconds.
3. Release the RECORD button to save the message. The message will play automatically during each scheduled feeding.
4. To disable the voice message, press the RECORD button twice quickly. Repeat to re-enable.

5. Manual Feeding

To dispense food instantly, press the MANUAL FEED button. Each press will dispense one portion of food.

Maintenance

1. Cleaning

Regular cleaning ensures hygiene and proper functioning.

1. Unplug the feeder from the power outlet and remove any batteries.
2. Remove the food container, lid, two-way splitter, and stainless steel bowls.
3. These removable parts are washable. They can be placed on the top rack of a dishwasher or hand-washed with mild soap and water.
4. The main unit (base with control panel) should not be immersed in water. Wipe it clean with a soft, damp cloth.
5. Ensure all parts are completely dry before reassembling and refilling with food.

2. Desiccant Replacement

The desiccant packet helps keep food fresh and dry. Replace it every 1-2 months, or as needed, depending on humidity levels.

Troubleshooting

Specifications