Dear customer,
We appreciate your choice of the automatic pet feeder. We insist on providing premium pet products, helping pet owners feed pets in a scientific and reasonable way and providing pets a healthy lifestyle. We are working for establishing a harmonious relationship between you and your pets.
For the convenience of using, please read the user manual carefully and follow the instructions.
WARRANTY
1 Year Warranty
Lifetime Support: For guidance on product use and warranty extension, please contact after-sales email: honeyguaridan@hotmail.com
If you have any questions related to orders, please contact the seller via the shopping platform.
Structural Image
The A56 Automatic Pet Feeder consists of the following components:
- Hopper release button: Used to release the hopper.
- Stainless steel bowl: Removable and washable bowl for food.
- Hopper: Holds the pet food.
- Feeder lid: Covers the hopper.
- Control panel: Interface for setting up the feeder.
- Feeder base: The main unit supporting the hopper and dispensing mechanism.
- Power interface: Port for the power adapter.
- Battery cover: Located at the bottom for backup power.
Packing List
Single Bowl Version:
- 1 x Pet Feeder
- 1 x Stainless Steel Bowl
- 1 x Bowl Holder
- 1 x Power Adapter
- 1 x Desiccant Bag
- 1 x User Manual
Dual Bowls Version:
- 1 x Pet Feeder
- 2 x Stainless Steel Bowls
- 2 x Bowl Holders
- 1 x Power Adapter
- 1 x Desiccant Bag
- 1 x 2-way Splitter
- 1 x User Manual
Notice
- To prevent mold growth, it is recommended to change the desiccant bag every 15 days.
- The feeder is for indoor household use only.
- The host of the equipment is not washable. The hopper and the food tray and stainless steel bowl can be removed and washable.
- Please keep pets from biting the power cable, as it may cause leakage.
- Please place the feeder horizontally and close the lid to keep the food from spilling out.
Setting Instructions
Control panel:
The control panel features several buttons:
- : Long press for 3 seconds to shut down/boot up. Short press cycles through meal settings (1-6 meals).
- : Programs the meal portion size (0-24 portions).
- : Dispenses one portion by pressing this button once.
- : Hours Setting Button - Set the hours time.
- : Minutes Setting Button - Set the minutes time.
- : Press this button to enter the time setting and save time when finished.
- : Record, play, or delete voice recordings.
Time Setting
- Press and hold the button for three seconds to unlock the screen and enter time setting mode. The hour and minute display (e.g., "88:88") will blink.
- Press the and buttons to set the desired hours and minutes.
- Press and hold the button for 3 seconds to exit time setting.
- You can switch between the 12-hour and 24-hour clock formats by pressing the and buttons simultaneously.
Feeding Setting
- Recommended food size: 0.2-1.2cm (0.07-0.47inch) diameter. Please use food smaller than 1.2cm to prevent the feeder from getting stuck.
- You can set 0-6 meals per day, with a maximum of 24 portions volume for each meal.
- One portion size is approximately 5-6g (16 ml) of food kibble. The dual bowls version dispenses one portion in each bowl, which is about 2.5g per bowl.
Setting Meals
- Meal 1: Press the button once to enter the feeding plan mode. At this time, Meal 1, feeding time, and feeding portions volume will blink. Press and to set the feeding time, then press the to set the meal portions.
- Meal 2: After finishing Meal 1 settings, press the button once to choose Meal 2. The meal feeding time and feeding portions volume will blink. Press and to set the feeding time, then press the to set the meal portions.
- You can use the same method to program Meals 3, 4, 5, and 6. If you do not need to program a specific meal or wish to delete a previous feeding plan, you can set the feeding portions volume to zero or adjust as needed.
Recording Setting
- Press and hold the button for three seconds to start recording. You can record for a maximum of 10 seconds after the recording indicator lights up. Releasing your hand during recording signals the end of the recording.
- After finishing recording, press the button once to play your recording. Press it twice until the recording indicator light blinks 3 times to remove the recording message.
Manual Feeding
- Press and hold the button for three seconds; the food will dispense one portion each time.
Low Battery Reminder
- When the batteries are low, the indicator will turn on the LCD screen. After new batteries are installed, the indicator will turn off.
- Battery model: 3xD size alkaline battery.
Reset Function
- If you need to reset the automatic pet feeder, press the button for 3 seconds.
Dual Bowls Installation
(If you purchased the dual bowls version)
- Step 1: Connect the two-way dispenser to the host.
- Step 2: Connect the feeder base dispenser to the host.