Yicensen 24-Inch High Twin Metal Platform Bed Frame

1. Introduction

Thank you for choosing the Yicensen 24-Inch High Twin Metal Platform Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image 1.1: The Yicensen 24-Inch High Twin Metal Platform Bed Frame.

2. Safety Information

WARNING:

• Exercise caution around sharp edges during assembly and handling.
• Do not load the bed frame with more than 1,500 pounds. Exceeding this weight limit may result in damage to the frame or personal injury.
• Ensure all bolts are securely tightened before use. Periodically check and re-tighten all connections.
• Keep small parts and packaging materials away from children to prevent choking hazards.

3. Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Yicensen customer support.

Image 3.1: Overview of the bed frame components as received in the package.

Components:

• Bed Frame Sections (Side Rails, Center Support Beams)
• Support Slats
• Rounded Corner Legs
• Hardware Pack (Bolts, Nuts, Washers, Allen Wrench, Spanner)

Image 3.2: Detailed view of integrated construction, anti-slip rubber gaskets, and easy lock features.

4. Assembly Instructions

The Yicensen bed frame is designed for easy assembly. Follow these steps to set up your bed frame.

Step-by-Step Guide:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
2. Assemble Frame Sides: Connect the side rails and end rails using the provided bolts and nuts. Ensure the rounded corner legs are correctly oriented.


Image 4.1: The rounded corner legs are designed for safety and aesthetics.

3. Install Center Support: Attach the center support beams to the frame. Ensure they are securely fastened to provide maximum stability.
4. Attach Slats: Place the metal slats across the frame. The slats are designed to fit snugly and provide robust support for your mattress without the need for a box spring.


Image 4.2: Visual guide for connecting the frame components.

5. Tighten All Connections: Using the provided tools, securely tighten all bolts and nuts. The anti-loosening nuts with rubber rings require the hex wrench for proper tightening. Do not overtighten.


Image 4.3: Anti-loosening nuts ensure a secure and stable assembly.

5. Operating Instructions

Once assembled, your Yicensen bed frame is ready for use. Simply place your twin-sized mattress directly onto the support slats. A box spring is not required, but can be used if desired, though it will increase the overall bed height.

Image 5.1: The 24-inch height provides ample under-bed storage space.

6. Maintenance

• Cleaning: Wipe the metal frame with a damp cloth and mild detergent. Avoid abrasive cleaners that may damage the finish.
• Regular Checks: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent noise.
• Weight Distribution: Distribute weight evenly across the bed frame to prolong its lifespan.

7. Troubleshooting

Common Issues:

• Squeaking or Noise: If the bed frame makes noise, check all connections and tighten any loose bolts. Ensure the slats are properly seated. Applying a small amount of lubricant to connection points may also help.
• Mattress Sliding: If your mattress tends to slide on the frame, consider placing a non-slip mat or rubber grippers between the mattress and the slats.

8. Specifications

9. Warranty and Support

For any questions, concerns, or assistance with your Yicensen bed frame, please contact Yicensen customer support through your retailer or the official brand website. Please have your model number (B0CWNG4PXF) available when contacting support.