Linklike HS1 50dB Noise Cancelling Bluetooth Headphones User Manual

1. Introduction

Thank you for choosing Linklike HS1 50dB Noise Cancelling Bluetooth Headphones. These headphones are designed to provide a high-quality audio experience with advanced noise cancellation, extended battery life, and comfortable wear. This manual will guide you through the setup, operation, and maintenance of your new headphones.

2. Package Contents

• Linklike HS1 Noise Cancelling Headphones
• USB-C Charging Cable
• User Manual

3. Product Overview

The Linklike HS1 headphones feature a comfortable, foldable design with soft memory foam ear pads and an adjustable headband for extended wear. They incorporate 40mm silk-dome drivers for Hi-Res audio and a multi-microphone system for effective noise cancellation and clear calls.

3.1 Controls

The headphones feature intuitive touch controls on the right ear cup surface and a multi-function button for various operations.

4. Setup

4.1 Charging

Connect the provided USB-C cable to the charging port on the headphones and to a compatible USB power source. A full charge takes approximately 1.5 hours and provides up to 180 hours of continuous listening in music mode (ANC off), or 90 hours with ANC on. A 10-minute fast charge can provide up to 18 hours of listening.

4.2 Bluetooth Pairing

1. Long press the multi-function button for 3 seconds to power on the headphones.
2. The LED indicator will flash, indicating pairing mode.
3. On your device (smartphone, laptop), enable Bluetooth and select "Linklike HS1" from the list of available devices.
4. Once connected, the LED indicator will show a steady light.

DualSync Seamless Switching: The headphones support connecting to two devices simultaneously. To use this feature, ensure both devices are paired. The headphones will intelligently switch between them based on audio activity.

4.3 Wired Audio Connection

Plug the included USB-C cable into the headphone's USB-C port and connect it to your audio source. This allows for audio playback even when the battery is depleted or for a wired connection without Bluetooth.

5. Operating Instructions

5.1 Power On/Off

• Power On: Long press the multi-function button for 3 seconds.
• Power Off: Long press the multi-function button for 10 seconds.

5.2 Noise Control Modes

The HS1 headphones feature Hybrid Active Noise Cancellation (ANC) up to 50dB and a Smart Transparency function.

• Switch Mode (ANC/Transparency/Normal): Click the multi-function button once.
• Instant Transparency: Place your palm over the surface of the right ear cup to temporarily switch to transparency mode, allowing you to hear your surroundings without removing the headphones.

5.3 Music Playback Control (Touch Controls)

Use the touch-sensitive surface on the right ear cup for music control:

• Volume Up: Slide finger upwards.
• Volume Down: Slide finger downwards.
• Next Track: Slide finger right.
• Previous Track: Slide finger left.
• Play/Pause: Double-tap the surface.

5.4 Call Management

The headphones are equipped with a microphone for hands-free calls.

• Answer/End Call: Double-tap the right ear cup surface.
• Decline Call: Long press the right ear cup surface.

5.5 Game Mode

For gaming, the headphones offer a low-latency mode. Click the multi-function button twice to activate Game Mode. For zero latency, use a wired USB-C connection.

5.6 Independent Use Mode

In Bluetooth waiting for pairing state, you can use the noise reduction and transparency functions independently without a connected cellphone. Click the multi-function button twice to enter/exit Independent Use Mode.

6. Maintenance

• Clean the headphones regularly with a soft, dry cloth.
• Avoid exposing the headphones to extreme temperatures or direct sunlight.
• The ear pads are made of skin-friendly delicate leather and memory foam, designed for comfort and breathability.
• The headphones are sweat-resistant, making them suitable for fitness activities.
• Store the headphones in their folded position to save space and protect them during travel.

7. Troubleshooting

• No Power: Ensure the headphones are fully charged.
• Cannot Pair: Ensure Bluetooth is enabled on your device and the headphones are in pairing mode. Try restarting both devices.
• Intermittent Connectivity: Move closer to your device to reduce interference. Ensure no other devices are causing signal disruption.
• Touch Controls Unresponsive: Ensure your fingers are clean and dry. Practice the gestures for precise control.
• No Sound in Wired Mode: Check if the USB-C cable is securely connected to both the headphones and the audio source.
• Reset: If issues persist, long press the multi-function button for 10 seconds to power off, then long press again for 10 seconds to reset.

8. Specifications

9. Warranty and Support

For warranty information, technical support, or further inquiries, please visit the official Linklike store or contact customer service. Each item has a unique code that we verify before shipping, ensuring product authenticity.

Visit the Linklike Store for more information.