Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ledvion LED Wall Light with Motion Sensor. Please read these instructions carefully before use and retain them for future reference.
The Ledvion LED Wall Light is designed for both indoor and outdoor applications, offering a modern aesthetic and functional illumination. It features an integrated motion sensor for automatic operation and provides warm white light (3000K) with an Up&Down lighting effect.
Image: Ledvion LED Wall Light installed, showcasing its Up&Down illumination.
Safety Instructions
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before installation, maintenance, or repair.
- Voltage: This product operates on 230 Volts. Verify your power supply matches this requirement.
- Outdoor Use: The fixture is IP44 rated, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. While suitable for outdoor use, avoid direct high-pressure water jets.
- Mounting: Mount the fixture securely on a stable surface. Use appropriate screws and wall plugs for the mounting surface.
- Heat: Do not cover the light fixture with insulating material. Ensure adequate ventilation around the fixture.
- Cleaning: Disconnect power before cleaning. Use a soft, damp cloth. Do not use abrasive cleaners or solvents.
Package Contents
Verify that all components are present in the package:
- 1x Ledvion LED Wall Light (LED cube)
- 2x Screw wall plugs
- 2x Screws
- 1x Instruction Manual
Image: Contents of the Ledvion LED Wall Light package, including the LED fixture, mounting screws, wall plugs, and the instruction manual.
Setup and Installation
- Preparation: Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Mounting Location: Choose a suitable wall location, considering the desired lighting effect and motion sensor coverage. The fixture is designed for wall mounting.
- Marking: Hold the fixture against the wall at the desired mounting height and mark the drilling points for the screws.
- Drilling: Drill holes at the marked points. Insert the supplied wall plugs into the drilled holes.
- Wiring: Connect the electrical wires from the wall to the terminals of the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Secure all connections.
- Securing the Fixture: Attach the fixture to the wall using the supplied screws, ensuring it is firmly secured.
- Adjusting Beam Angle (Optional): The light features an adjustable beam angle from 0° to 120°. Adjust the internal flaps to achieve your desired Up&Down lighting pattern.
Image: The adjustable beam angle feature allows customization of the Up&Down light distribution.
Image: Product dimensions for installation planning.
Operating Instructions
The Ledvion LED Wall Light is equipped with an integrated motion sensor for automatic operation.
- Power On: After installation, restore power to the circuit. The light may briefly turn on as it initializes.
- Motion Detection: The integrated sensor detects movement within its range. When motion is detected, the light will automatically switch on.
- Automatic Off: After a period of no detected motion, the light will automatically switch off. The duration of this period is typically pre-set and not user-adjustable for this model.
- Light Output: The fixture provides 2x3W of warm white (3000K) LED light, illuminating both upwards and downwards.
Image: The wall lamp automatically activates when motion is detected.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Ledvion LED Wall Light.
- Cleaning: Disconnect the power supply before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or electronic components.
- Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
- Durability: The fixture is constructed from high-quality aluminum and plastic, designed to be anti-rust and anti-moisture, contributing to its durability in outdoor environments.
Image: The IP44 rating ensures protection against dust and splashing water.
Troubleshooting
If you encounter issues with your Ledvion LED Wall Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply, faulty wiring, sensor malfunction. | Check circuit breaker. Verify wiring connections. Ensure sufficient ambient light for sensor to activate (if applicable, though this model has a motion sensor). |
| Light stays on continuously. | Continuous motion detected, sensor malfunction. | Ensure no objects are continuously moving within the sensor's field of view. If problem persists, consult a qualified electrician. |
| Light flickers. | Unstable power supply, loose connection. | Check power supply stability. Inspect wiring for loose connections. |
| Motion sensor not responding. | Sensor obstructed, incorrect placement, sensor malfunction. | Ensure the sensor lens is clean and unobstructed. Verify the light is placed in an optimal location for motion detection. |
If these solutions do not resolve the issue, please contact Ledvion customer support or a qualified electrician.
Specifications
| Brand | Ledvion |
| Model Number | LVO10072 |
| Product Dimensions (L x W x H) | 11 x 11 x 11 cm |
| Item Weight | 410 g |
| Material | Aluminum, Plastic |
| Color | Black |
| Voltage | 230 Volts |
| Wattage | 2x3 Watts (Total 6W) |
| Light Source Type | Integrated LED (COB LED) |
| Color Temperature | 3000 Kelvin (Warm White) |
| Special Feature | Motion Detector |
| IP Rating | IP44 |
| Installation Type | Wall Mount |
Warranty and Support
The Ledvion LED Wall Light (Model LVO10072) comes with a 2-year warranty from the date of purchase, covering manufacturing defects under normal use conditions.
Image: 2-year warranty information.
For warranty claims, technical support, or further assistance, please contact Ledvion customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and model number (LVO10072) ready.
You can visit the Ledvion store for more information: Ledvion Official Store
