Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your HITHOS King Upholstered LED Bed Frame. Please read this manual thoroughly before beginning assembly or operation to ensure proper use and longevity of your product.
Image: The HITHOS King Upholstered LED Bed Frame, showcasing its beige velvet upholstery, wingback headboard, and integrated LED lighting, with one storage drawer partially open.
Safety Information
WARNING: Always be careful not to place hands near or under the hinges when opening and closing the bed frame components, especially the storage drawers, to prevent injury.
- Ensure all parts are securely fastened before use.
- Do not exceed the recommended weight capacity of the bed frame.
- Keep small parts and packaging materials away from children.
- Use only the provided tools and hardware for assembly.
Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact HITHOS customer support.
- Headboard with integrated LED lights
- Bed Frame Side Rails (Left and Right)
- Footboard with 2 Storage Drawers
- Wooden Slats and Plastic Snap Locks
- Center Support Beam and Legs
- Assembly Hardware Kit (screws, bolts, washers, Allen wrench)
- LED Light Remote Control
- Power Adapter for LED Lights
- Installation Manual
Setup and Assembly
Assembly of the HITHOS King Upholstered LED Bed Frame typically takes approximately 2 hours with two people. Follow the detailed instructions provided in the included Installation Manual for step-by-step guidance. Ensure you have ample space for assembly.
Image: A diagram illustrating the King size dimensions of the bed frame (84"L x 79.3"W x 46.3"H) and its components, including the headboard, frame, slats, and storage drawers, with a 1000 lbs weight capacity indicated.
Key Assembly Tips:
- Lay out all parts on a clean, soft surface to prevent scratches.
- Do not fully tighten screws until all components are loosely assembled.
- The plastic snap locks for the wooden slats are designed for quick installation and noise reduction. Ensure they are properly seated.
- Connect the LED light wiring carefully as per the manual.
Operating Instructions
LED Lighting System
The integrated RGB LED lights in the headboard offer customizable ambiance for your bedroom. They can be controlled via the included remote control or a dedicated smartphone application.
Image: A visual representation of the LED strip lights with options for control via a remote and a smartphone app, highlighting features like multi-colors, timing function, flash mode, and mic mode.
- Power On/Off: Use the power button on the remote or app to turn the lights on or off.
- Color Selection: Choose from multiple colors or single color options using the color palette on the remote or app.
- Brightness Adjustment: Adjust the light intensity to your preference.
- Modes: Explore various settings such as timing functions, flash modes, and sound-activated modes (if applicable).
Image: A split image showing the bed frame in a bedroom setting, demonstrating the difference between the LED lights being off during the day and illuminated at night, creating ambient lighting.
Storage Drawers
The bed frame features two spacious storage drawers located in the footboard, providing convenient under-bed storage for various items.
Image: A close-up view of one of the under-bed storage drawers, pulled out to reveal folded clothes and other items stored within, demonstrating its practical use.
- To open, gently pull the drawer handle outwards.
- To close, push the drawer back into the frame until it is flush.
- Avoid overloading the drawers to ensure smooth operation and prevent damage.
Maintenance
Cleaning the Upholstery:
- Regularly vacuum the velvet upholstery using a soft brush attachment to remove dust and debris.
- For spills, blot immediately with a clean, dry cloth. Do not rub.
- For stubborn stains, consult a professional upholstery cleaner or use a mild, pH-neutral fabric cleaner specifically designed for velvet, testing on an inconspicuous area first.
LED Lights and Electrical Components:
- Ensure the power adapter is unplugged before cleaning or performing any maintenance on the LED lights.
- Wipe the LED strip and headboard surface with a soft, dry cloth. Do not use liquid cleaners directly on the lights.
Frame and Slats:
- Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary.
- Inspect wooden slats for any signs of wear or damage. Replace if compromised.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame makes noise (squeaking/rattling) | Loose connections; improper slat installation; friction. | Ensure all bolts are tightened. Verify plastic snap locks on slats are correctly installed. The bed frame is equipped with silent strips to reduce noise. |
| LED lights not working | Power connection issue; remote battery low; app connectivity problem. | Check if the power adapter is securely plugged into the wall and the bed frame. Replace remote batteries. Re-pair the app if necessary. |
| Storage drawers are difficult to open/close | Overloaded drawers; debris in tracks; misaligned tracks. | Reduce the weight in the drawers. Clean any debris from the drawer tracks. Check for proper alignment of the drawer and its tracks. |
| Headboard feels unstable | Loose headboard bolts. | Tighten all bolts connecting the headboard to the bed frame. |
Specifications
| Feature | Detail |
|---|---|
| Brand | HITHOS |
| Model Number | Upholstered LED Bed Frame |
| Size | King |
| Product Dimensions | 84"L x 79.3"W x 46.3"H |
| Color | Beige |
| Material | Velvet Upholstery, Solid Wooden Slats |
| Special Features | Fade Resistant, Headlight (LED), Squeak Resistant, Sturdy |
| Included Components | Headboard, Installation Manual |
| Compatible Mattress Size | King |
| Assembly Required | Yes |
| Ground To Item Distance | 13.4 Inches |
| Item Weight | 139 pounds |
Image: Detailed views of the headboard, highlighting its 2.5" foam padding for comfort, the elegant wingback design, and the gold brushed metal accents that provide a modern aesthetic.
Warranty and Support
HITHOS is committed to providing high-quality furniture. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any product inquiries, missing parts, or assistance with assembly and troubleshooting, please contact HITHOS customer support through the retailer where the product was purchased or visit the official HITHOS brand store online.