1. Introduction
Thank you for purchasing the ZEBRONICS Buddy 200 Portable Party Speaker. This manual provides essential information for the safe and correct operation of your device. Please read it thoroughly before use and retain it for future reference.
The ZEBRONICS Buddy 200 is a versatile portable party speaker designed for various audio needs, featuring Bluetooth connectivity, multiple input options, karaoke functionality, and dynamic RGB LED lighting.
Image 1.1: ZEBRONICS Buddy 200 Portable Party Speaker, showcasing its design, wireless microphone, and remote control.
2. Safety Instructions
- Do not expose the speaker to water or moisture.
- Avoid placing the speaker near heat sources or in direct sunlight.
- Use only the charging cable provided or a certified equivalent.
- Do not attempt to disassemble or repair the speaker yourself. Contact qualified service personnel.
- Keep the speaker away from children and pets.
- Ensure proper ventilation around the speaker during use.
3. Package Contents
Please check the box for the following items:
- ZEBRONICS Buddy 200 Speaker - 1 unit
- Wireless Microphone - 1 unit
- Remote Control - 1 unit
- Charging Cable - 1 unit
- Input Cable (AUX) - 1 unit
4. Product Overview: Controls and Ports
Familiarize yourself with the control panel and various input/output ports on your speaker.
Image 4.1: Detailed view of the ZEBRONICS Buddy 200 control panel.
Control Panel Features:
- TF (Micro SD) Slot: For Micro SD card playback.
- USB Port: For USB drive playback.
- AUX Input: 3.5mm jack for external audio devices.
- MIC 1 / MIC 2: 6.3mm inputs for wired microphones.
- GUITAR IN: 6.3mm input for connecting a guitar.
- DC 5V: Charging port.
- POWER ON/OFF: Main power switch.
- VOLUME: Master volume control knob.
- MIC.VOL: Microphone volume control knob.
- TREBLE / BASS / GUITAR / ECHO: Equalizer and effect controls.
- MODE Button: Switches between input modes (Bluetooth, USB, mSD, FM, AUX).
- Previous/Next Buttons: For track navigation.
- Play/Pause Button: For media control.
- EQ Button: Selects equalizer presets.
- REC Button: Initiates recording (requires USB/mSD).
- Light Button: Controls RGB LED light modes.
5. Getting Started
5.1. Charging the Speaker
- Connect the provided charging cable to the DC 5V port on the speaker.
- Connect the other end of the charging cable to a compatible 5V USB power adapter (not included).
- The LED display will indicate charging status. Charge the speaker fully before first use (approximately 7 hours for full charge).
5.2. Powering On/Off
Toggle the POWER ON/OFF switch located on the control panel to turn the speaker on or off.
6. Operating Instructions
6.1. Bluetooth Mode
Image 6.1: The speaker supports Bluetooth connectivity for wireless audio streaming.
- Turn on the speaker. It will automatically enter Bluetooth mode, indicated by a flashing 'BLUE' on the LED display.
- Enable Bluetooth on your mobile device and search for 'ZEBRONICS Buddy 200'.
- Select the speaker from the list to pair. A confirmation tone will sound upon successful connection.
- You can now play audio from your device wirelessly.
6.2. USB/MicroSD Playback
- Insert a USB drive or Micro SD card (with MP3 audio files) into the respective port.
- The speaker will automatically switch to USB/MicroSD mode and begin playback. If not, press the MODE button to select.
- Use the Play/Pause and Previous/Next buttons to control playback.
6.3. AUX Input
- Connect one end of the provided input cable to the AUX port on the speaker.
- Connect the other end to the audio output of your external device (e.g., smartphone, laptop).
- Press the MODE button until 'AUX' is displayed.
- Control audio playback from your connected device.
6.4. FM Radio
- Press the MODE button to switch to FM Radio mode.
- Press and hold the Play/Pause button to automatically scan and save available FM stations.
- Use the Previous/Next buttons to navigate between saved stations.
6.5. Karaoke Function and Recording
- Connect the wireless microphone (included) or a wired microphone to the MIC 1 or MIC 2 input.
- Adjust the MIC.VOL knob to control microphone volume.
- Use the ECHO knob for vocal effects.
- To record, ensure a USB drive or Micro SD card is inserted. Press the REC button to start recording. Press again to stop.
- A guitar can be connected to the GUITAR IN port, and its volume adjusted with the GUITAR knob.
6.6. TWS Function (True Wireless Stereo)
The TWS function allows you to connect two ZEBRONICS Buddy 200 speakers wirelessly for a stereo audio experience.
- Ensure both Buddy 200 speakers are powered on and in Bluetooth mode.
- On one of the speakers (this will be the master speaker), press and hold the MODE button for a few seconds until you hear a pairing tone.
- The two speakers will automatically connect to each other.
- Once connected, pair your mobile device to the master speaker via Bluetooth as described in section 6.1.
6.7. RGB LED Lights Control
Image 6.2: The speaker features multiple RGB LED light modes for visual enhancement.
Press the Light button on the control panel or remote control to cycle through different RGB LED light modes or to turn them off.
7. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for extended periods.
- Transportation: Utilize the integrated carry handle and trolley wheels for easy transport.
Image 7.1: Features like the mobile holder, carry handle, and trolley wheels enhance portability and user convenience.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on | Low battery; Power switch off | Charge the speaker; Ensure power switch is ON |
| No sound output | Volume too low; Incorrect mode; Cable not connected | Increase volume; Select correct input mode; Check cable connections |
| Bluetooth not connecting | Speaker not in pairing mode; Device Bluetooth off; Interference | Ensure speaker is in Bluetooth mode; Enable Bluetooth on device; Move closer to speaker |
| Microphone not working | Microphone off; MIC.VOL too low; Battery low (wireless mic) | Turn on microphone; Increase MIC.VOL; Replace batteries in wireless mic |
| USB/MicroSD not playing | Unsupported file format; Drive/card corrupted; Incorrect mode | Ensure MP3 format; Try another drive/card; Select USB/mSD mode |
9. Technical Specifications
Image 9.1: Dimensions of the ZEBRONICS Buddy 200 speaker.
| Feature | Specification |
|---|---|
| Model Name | Zeb-Buddy 200 |
| Speaker Type | Outdoor |
| Connectivity Technology | Bluetooth v5.0, USB, mSD, AUX |
| Audio Output Mode | Stereo |
| Speaker Maximum Output Power | 100 Watts |
| Audio Driver Size | Dual 20.32 cm Full Range Drivers |
| Signal-to-Noise Ratio | 85 dB |
| Power Source | Battery Powered |
| Battery Average Life | Up to 7 Hours (at 50% volume, LED off) |
| Control Method | Remote, On-device controls |
| Special Features | Portable, Karaoke Function, RGB LED Lights, Mobile Holder, TWS, FM Radio, Recording Function, Dual Mic Input, Guitar Input, Trolley Wheels |
| Product Dimensions (D x W x H) | 36.5D x 39W x 80.5H Centimeters |
| Item Weight | 8.6 kg |
| Colour | RGB |
| Is Waterproof | No |
10. Warranty and Support
10.1. Warranty Information
The ZEBRONICS Buddy 200 Portable Party Speaker comes with a 1 Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your purchase receipt for warranty claims.
The warranty does not cover damages caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
10.2. Customer Support
For any product-related queries, technical assistance, or warranty claims, please contact ZEBRONICS customer support through their official website or the contact information provided with your product packaging.
