1. Introduction
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your LALAHOO Smart Tankless Toilet, Model WQ_24221_MT. Please read this manual thoroughly before installation and use, and retain it for future reference.
Figure 1: LALAHOO Smart Tankless Toilet with LED illumination.
2. Safety Information
- Ensure the toilet is installed by a qualified professional to prevent water leakage or electrical hazards.
- This toilet requires an electrical connection for its smart features (heated seat, LED light, automatic flush). Ensure the power outlet meets local electrical codes.
- Do not immerse the electrical components in water.
- Disconnect power before performing any maintenance or cleaning.
- The toilet is heavy; use proper lifting techniques or seek assistance during installation to avoid injury.
3. Package Contents
Verify that all components are present before beginning installation:
- LALAHOO Smart Tankless Toilet Unit
- Angle Valves (x1)
- Battery Box (x1, batteries not included)
- Flange Gasket
- Installation Manual
Figure 2: Toilet dimensions and included components.
4. Setup & Installation
The LALAHOO Smart Tankless Toilet is designed for straightforward installation. Due to its weight, two people are recommended for lifting and positioning the unit.
4.1 Pre-Installation Steps
- Turn off the main water supply to your bathroom.
- Remove your old toilet and clean the flange area thoroughly.
- Ensure the floor flange is in good condition and properly secured.
4.2 Toilet Placement and Connections
- Carefully place the new flange gasket over the floor flange.
- With assistance, lift the LALAHOO Smart Tankless Toilet and align it over the floor flange, pressing down firmly to create a seal.
- Secure the toilet to the floor using the provided hardware.
- Connect the water supply line to the toilet's inlet valve and the angle valve. Ensure all connections are tight to prevent leaks.
- Connect the toilet's power cord to a grounded electrical outlet.
- Install backup batteries (not included) into the designated battery slot for power outage functionality.
For a visual guide on installation, please refer to the following video:
Video 1: Installation overview of the LALAHOO Smart Tankless Toilet. This video demonstrates the unboxing and installation process, highlighting key steps for setting up the toilet.
5. Operating Instructions
Your LALAHOO Smart Tankless Toilet offers several convenient features for enhanced comfort and hygiene.
5.1 Automatic Flushing
- Seat Sensor: The toilet is equipped with a seat sensor. After 10 seconds of being seated, the toilet will automatically flush once the user stands up and moves away.
- Foot Sensor: For hands-free operation, a foot sensor is located at the bottom right of the toilet. Simply swipe your foot near this sensor to activate a flush. This feature is particularly useful for men's urinal flushing, eliminating the need to bend down.
Figure 3: Automatic 360-degree swirling flush for efficient cleaning.
Figure 4: Foot sensor flushing for hands-free operation.
5.2 Side Control Knob
The multi-function knob located on the side of the toilet controls various settings:
Figure 5: Side control knob for various functions.
- Manual Flush: Press the center of the knob to activate a manual flush.
- Heated Seat Temperature Adjustment: Rotate the knob counter-clockwise to adjust the seat temperature. There are 4 levels of temperature adjustment: Ambient, Low (34°C), Medium (37°C), and High (40°C).
- LED Ambient Light: Rotate the knob clockwise to adjust the LED ambient light settings. The LED light automatically illuminates the toilet bowl for nighttime use.
Figure 6: Heated seat temperature adjustment with four levels.
5.3 Power Outage Functionality
In the event of a power outage, the toilet can still be flushed manually. If backup batteries are installed in the battery slot, a long press on the side control knob will activate a flush.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your smart toilet.
- Cleaning: Use a soft cloth and mild, non-abrasive cleaners. Avoid harsh chemicals or abrasive pads that could damage the ceramic or electronic components.
- Nozzle Cleaning: Periodically clean the bidet nozzle (if applicable, though not explicitly mentioned as a feature, it's common for smart toilets) according to the instructions in the full manual.
- Power Disconnection: Always unplug the toilet from the power outlet before extensive cleaning or maintenance.
7. Troubleshooting
If you encounter issues with your LALAHOO Smart Tankless Toilet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Toilet does not flush automatically. | Seat sensor not activated or foot sensor not detected. | Ensure proper seating or clear foot path for sensor. Check power connection. |
| Heated seat not working. | Power not connected or temperature setting too low. | Verify power connection. Rotate side knob counter-clockwise to increase temperature. |
| LED light not illuminating. | Power not connected or light setting off. | Verify power connection. Rotate side knob clockwise to activate or adjust light. |
| No flush during power outage. | Backup batteries not installed or depleted. | Install fresh batteries in the battery box. Long press the side knob to flush. |
8. Specifications
- Model Number: WQ_24221_MT
- Brand: LALAHOO
- Product Dimensions: 22"D x 11.2"W x 18.5"H
- Material: Ceramic (Toilet), Polypropylene (PP) (Seat)
- Installation Type: Floor Mounted
- Color: White (LALAHOO)
Figure 7: Detailed product dimensions.
9. Warranty & Support
LALAHOO provides a 1-year warranty for the entire toilet unit, ensuring safety and quality stability.
If you encounter any problems or require assistance, please contact LALAHOO customer service through Amazon. We aim to reply within 24 hours.
Note: If a return is necessary, please contact us in advance to receive a prepaid label for a free return.
Figure 8: LALAHOO Customer Support.