VINGLI Wicker Patio Bar Set (Model: 3pcsbarset) Instruction Manual

Important Safety Information

Please read and understand all instructions before assembly and use of this product. Failure to follow these instructions may result in injury or damage.

• Ensure all components are present and undamaged before beginning assembly.
• Assemble the furniture on a flat, stable surface to prevent wobbling or tipping.
• Do not overtighten screws during assembly, as this may damage the material.
• Keep children and pets away from the assembly area.
• Do not stand or jump on the table or stools.
• Distribute weight evenly on the table and stools.
• Regularly check all bolts and connections to ensure they remain tight.
• This product is designed for outdoor use. Store cushions indoors during inclement weather to prolong their lifespan.

Package Contents

Verify that all parts are included in your package. If any parts are missing or damaged, please contact customer support.

• 1 x Bar Table
• 2 x Bar Stools
• 2 x Seat Cushions
• Assembly Hardware (screws, washers, Allen wrench)
• Instruction Manual

Setup and Assembly

Assembly is required for this VINGLI Patio Bar Set. The product comes unassembled and needs to be put together. It is recommended to have two people for assembly. Allow approximately 15-30 minutes per chair and table.

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify all parts and hardware using the provided parts list.
3. For each bar stool:
   • Attach the seat frame to the leg frames using the designated screws.
   • Secure the backrest to the seat and leg frames.
   • Ensure all connections are firm but do not fully tighten screws until all parts are aligned.
   • Once assembled, fully tighten all screws.
4. For the bar table:
   • Attach the tabletop to the leg frames.
   • Install the storage shelf between the leg frames.
   • Ensure all connections are firm but do not fully tighten screws until all parts are aligned.
   • Once assembled, fully tighten all screws.
5. Attach the adjustable leveling screws to the bottom of each leg on both the table and stools. Secure them to the floor for stability and to protect the floor.

Image: Assembly overview for a single bar stool, indicating 6 parts, 5 steps, and an estimated 15 minutes for assembly.

Operating Instructions

The VINGLI Wicker Patio Bar Set is designed for comfortable outdoor use. Follow these guidelines for optimal experience:

• Placement: Position the bar set on a flat, stable outdoor surface. Adjust the leveling screws as needed to prevent wobbling.
• Cushions: Place the provided cushions on the bar stools for enhanced comfort. These cushions are waterproof, but it is recommended to store them indoors during heavy rain or prolonged periods of non-use to maintain their quality.
• Storage Shelf: Utilize the two ample shelves on the bar table for storing drinks, snacks, or other patio accessories.
• Weather Resistance: The set is made with weather-resistant wicker and a heavy-duty steel frame, designed to withstand outdoor elements. However, extreme weather conditions may require additional protection or storage.

Image: Detailed view of the VINGLI bar set, highlighting the all-woven rattan wrap and adjustable foot pads for stability.

Maintenance and Care

Proper maintenance will extend the life and appearance of your VINGLI Patio Bar Set.

• Cleaning the Wicker and Frame: Wipe the surfaces with a damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly. Avoid harsh chemicals or abrasive cleaners.
• Cushion Care: The cushion covers are removable and machine washable. Zip off the cushion cover and wash according to the fabric care instructions (typically cold water, gentle cycle). Air dry or tumble dry on low.
• Seasonal Storage: During off-season or prolonged periods of non-use, it is recommended to cover the furniture or store it in a dry, protected area to prevent wear from extreme weather.
• Hardware Check: Periodically inspect all screws and bolts to ensure they are tight. Retighten as necessary to maintain structural integrity.

Troubleshooting

If you encounter any issues with your VINGLI Patio Bar Set, refer to the following common solutions:

• Wobbly Table or Stool:
  • Ensure the furniture is placed on a flat, even surface.
  • Adjust the leveling screws on the bottom of the legs until stability is achieved.
  • Check all assembly screws and tighten any loose connections.
• Difficulty Assembling:
  • Review the assembly instructions carefully.
  • Ensure you are using the correct hardware for each step.
  • Do not fully tighten screws until all parts are loosely assembled and aligned.
  • If parts do not fit, double-check their orientation.
• Damaged or Missing Parts:
  • Contact VINGLI customer support immediately with your model number and a description of the issue.

Specifications

Image: Diagram illustrating the dimensions of the bar table and a single bar stool, including height, width, and depth measurements. Note: The image indicates chair capacity of 333 lbs and table capacity of 222 lbs, while product specifications state 330 lbs for chairs and 165 lbs for the table. Please refer to the text specifications for precise weight limits.

Customer Support

For any questions, missing parts, or assistance with your VINGLI Patio Bar Set, please contact VINGLI customer support. Refer to your purchase documentation for specific contact details or visit the official VINGLI website.