KRK RP5G5-NA

KRK ROKIT 5 Generation Five Powered Studio Monitor

Model: RP5G5-NA | Brand: KRK

Introduction

The KRK Systems ROKIT 5 Generation Five studio monitor is designed to provide accurate audio reproduction for mixing, mastering, and critical listening. This manual provides essential information for setting up, operating, and maintaining your monitor to ensure optimal performance.

Setup

1. Unpacking and Inspection

Carefully remove the monitor from its packaging. Inspect the unit for any signs of damage during transit. Retain the original packaging for future transport or storage.

2. Placement

Proper placement of your ROKIT 5 Generation Five monitors is crucial for accurate sound reproduction. Position the monitors at ear level, forming an equilateral triangle with your listening position. Ensure there are no obstructions between the monitors and your ears. Utilize the included acoustic foam wedge isolation pads to minimize resonance and support proper setup positioning, which helps in decoupling the monitors from your desk or stand.

Front view of the KRK ROKIT 5 Generation Five studio monitor

Figure 1: Front view of the KRK ROKIT 5 Generation Five studio monitor, showing the yellow woofer and black tweeter.

3. Connections

The ROKIT 5 Generation Five features XLR and 1/4” TRS Combo analog inputs for wide compatibility with various audio devices. Connect your audio source (e.g., audio interface, mixer) to the monitor using appropriate balanced cables. Ensure all connections are secure before powering on the unit.

Rear view of the KRK ROKIT 5 Generation Five studio monitor, showing input ports and controls

Figure 2: Rear panel of the KRK ROKIT 5 Generation Five, displaying the balanced input, power switch, and function knob for DSP settings.

4. Power Connection

Connect the provided power cord to the monitor's AC input and then to a suitable power outlet. The monitor operates on AC 100-240V, 50/60Hz. Ensure the power switch is in the OFF position before connecting to power.

Operating

1. Powering On/Off

To power on the monitor, flip the power switch located on the rear panel to the 'ON' position. To power off, flip the switch back to 'OFF'. It is recommended to power on your monitors after your audio source and power them off before your audio source to prevent pops or clicks.

2. Voicing Modes

The ROKIT 5 Generation Five features onboard DSP technology providing three distinct Voicing Modes:

These modes eliminate the need for separate sets of monitors for different tasks, effectively providing three pairs of monitors in one unit. Use the function knob on the rear panel to cycle through these modes.

3. EQ Adjustments

The monitor also features 25 boundary and tuning EQ combinations. These settings help minimize and correct problems in your acoustic environment. Refer to the detailed instructions in the full user manual or use the free KRK App for precise setup and acoustic environment analysis.

4. Volume Control

Adjust the input sensitivity/volume using the dedicated knob on the rear panel. Start with a low volume and gradually increase it to a comfortable listening level.

Maintenance

To ensure the longevity and optimal performance of your KRK ROKIT 5 Generation Five monitors, follow these maintenance guidelines:

Troubleshooting

If you encounter issues with your KRK ROKIT 5 Generation Five monitor, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
No SoundPower off; incorrect input connection; volume too low.Ensure power switch is ON; check audio cables are securely connected to the correct input; increase volume.
Distorted SoundInput signal too high; incorrect EQ settings; damaged cable.Reduce input level from source; reset EQ settings or adjust using KRK App; try a different audio cable.
Hum or BuzzGround loop; interference from other electronics.Ensure all equipment is on the same electrical circuit; use balanced cables; try a ground loop isolator if necessary.
Monitor Not Powering OnPower cord not connected; faulty power outlet.Check power cord connection; try a different power outlet.

For more advanced troubleshooting or persistent issues, consult the full KRK user manual or contact KRK customer support.

Specifications

FeatureDetail
BrandKRK
Model NameRP5G5
Item Model NumberRP5G5-NA
Speaker Size5 Inches
Woofer Diameter5 Inches (Woven Kevlar Aramid Fiber Cone)
Tweeter1 Inch (Silk Dome Diaphragm)
Speaker Maximum Output Power55 Watts
Power SourceCorded Electric (AC 100-240V, 50/60Hz)
Connectivity ProtocolBluetooth (for App control)
Control MethodApp, Onboard DSP
Compatible DevicesDesktop, Laptop
Product Dimensions15.8 x 12.5 x 10.3 inches
Item Weight13.68 pounds
Is WaterproofFALSE
UPC711106142258

Warranty

The KRK ROKIT 5 Generation Five studio monitor comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the warranty card included with your product or visit the official KRK Systems website. Keep your proof of purchase for warranty claims.

Support

For additional support, product registration, or to download the free KRK App for advanced control and acoustic analysis, please visit the official KRK Systems website. You can also find FAQs and contact information for customer service there.

Official KRK Website: www.krksys.com

Related Documents - RP5G5-NA

Preview KRK ROKIT Generation Five Monitoring Systems User Manual
Comprehensive user manual for KRK ROKIT Generation Five studio monitoring systems, covering setup, operation, features, troubleshooting, and warranty information for professional audio monitoring.
Preview KRK ROKIT G4 Studio Monitor User Manual: Setup, Features, and Troubleshooting
Comprehensive user manual for KRK ROKIT G4 DSP Controlled Studio Monitors. Covers setup, room acoustics, EQ, input sensitivity, power, standby, troubleshooting, and model-specific features for ROKIT G4 and ROKIT G4 10-3.
Preview KRK ROKIT G4 Studio Monitor User Manual
Comprehensive user manual for the KRK ROKIT G4 DSP Controlled Studio Monitor. Learn about setup, features, troubleshooting, and optimizing your listening experience.
Preview KRK K8 Studio Monitor Label Location and Specifications
Detailed information on the label location and rear panel controls of the KRK K8 professional studio monitoring system, including input options, level adjustments, and power specifications.
Preview KRK2 Bluetooth Speaker User Manual and Specifications
Comprehensive user manual and technical specifications for the KRK2 Bluetooth Speaker by DGL Group LTD. Learn about features, operation, and troubleshooting for your KRK2 speaker.
Preview KRK ROKIT Generation Five Studio Monitors User Manual
User guide for KRK ROKIT Generation Five studio monitors, covering setup, operation, safety, troubleshooting, and warranty. Learn how to optimize your studio sound with KRK.