1. Introduction
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your A-Tech 32GB Kit (2x16GB) DDR4 3200MHz PC4-25600 SODIMM memory modules. Designed for compatible laptops, this memory upgrade enhances system performance, reduces bottlenecks, and increases multitasking capabilities. Please read this manual thoroughly before proceeding with installation.
2. Product Overview
The A-Tech 32GB Kit consists of two 16GB DDR4 SODIMM modules, operating at 3200MHz with a voltage of 1.2V. These Non-ECC Unbuffered modules are designed to meet JEDEC DDR4 standards, providing reliable and stable performance for compatible systems.
Figure 2.1: A-Tech 32GB Kit (2x16GB) DDR4 3200MHz SODIMM Memory Modules in Retail Packaging.
Figure 2.2: Individual A-Tech 16GB DDR4 3200MHz SODIMM Memory Modules.
3. Compatibility
This A-Tech memory kit is specifically compatible with the following ASUS ROG Strix G17 Gaming Laptop Models:
- ASUS ROG Strix G17 G712 (10th Gen Intel)
- ASUS ROG Strix G17 G712LU
- ASUS ROG Strix G17 G712LV
- ASUS ROG Strix G17 G712LW
- ASUS ROG Strix G17 G712LWS
It is designed for Laptop, Mini PC, and All-in-One (AIO) systems. Note: This memory is NOT compatible with Desktop PC/Computers. Always refer to your system's manual to confirm memory compatibility and maximum supported capacity before installation.
Figure 3.1: Compatibility information for A-Tech SODIMM modules.
4. Specifications
| Feature | Specification |
|---|---|
| Memory Type | DDR4 SODIMM |
| Capacity | 32GB Kit (2 x 16GB Modules) |
| Speed | 3200MHz (PC4-25600) |
| Pin Count | 260-Pin |
| Voltage | 1.2V |
| Error Correction | Non-ECC Unbuffered |
| Dimensions (LxWxH) | 2.74 x 1.18 x 0.15 inches (69.60 x 30 x 3.81 mm) |
Figure 4.1: Physical dimensions of the A-Tech SODIMM module.
5. Setup and Installation
Installing RAM is a straightforward process, but requires careful handling to prevent damage to the modules or your system. Always consult your laptop's specific service manual for detailed instructions on accessing and replacing memory modules, as procedures may vary by model.
5.1. Safety Precautions
- Power Off: Completely shut down your laptop and disconnect it from all power sources (AC adapter and battery).
- Static Electricity: Static electricity can damage electronic components. Work on a clean, dry surface. Ground yourself by touching a metal, unpainted part of the laptop chassis before handling the memory modules. Consider using an anti-static wrist strap.
- Handle with Care: Hold memory modules by their edges, avoiding contact with the gold connectors or the chips.
5.2. Installation Steps
- Prepare Your Laptop: Shut down your laptop, disconnect the power adapter, and remove the battery (if removable).
- Access Memory Slots: Carefully open the laptop's back panel or memory compartment cover. Refer to your laptop's service manual for exact instructions.
- Remove Existing Modules (if applicable): If replacing existing memory, gently push the small metal clips on both sides of the SODIMM slot outwards. The module will pop up at an angle. You can then carefully pull it out.
- Insert New Modules: Align the notch on the A-Tech SODIMM module with the key in the memory slot. Insert the module at a 45-degree angle into the slot.
- Secure Modules: Gently push the module down until the metal clips on both sides snap into place, securing the module horizontally. Ensure both clips are fully engaged.
- Close Laptop: Replace the memory compartment cover and reassemble your laptop.
- Power On: Reconnect the battery and power adapter. Turn on your laptop. The system should automatically detect the new memory.
For visual guidance, you may find helpful resources on the A-Tech website or your laptop manufacturer's support pages. Visit A-Tech Support
Figure 5.1: A-Tech SODIMM modules, highlighting electrostatic sensitivity.
6. Operating Principles
Once installed, the A-Tech DDR4 3200MHz SODIMM modules will be automatically recognized by your laptop's BIOS/UEFI and operating system. The increased memory capacity and speed will allow your system to:
- Improve Multitasking: Run more applications simultaneously without slowdowns.
- Faster Loading Times: Experience quicker application launches and data processing.
- Enhanced Responsiveness: Overall smoother system performance.
- Increased Workload Capacity: Handle more demanding tasks like gaming, video editing, or complex simulations more efficiently.
Figure 6.1: A-Tech memory module emphasizing performance boost. Learn more at A-Tech Memory
Figure 6.2: Illustrating enhanced multitasking capabilities with A-Tech memory.
Figure 6.3: Visual representation of performance upgrade.
7. Maintenance
Memory modules generally require minimal maintenance once installed. However, adhering to general computer maintenance practices will help ensure their longevity and optimal performance:
- Keep System Clean: Regularly clean your laptop's cooling vents to prevent dust buildup, which can lead to overheating and affect component lifespan.
- Proper Shutdown: Always shut down your laptop properly to prevent data corruption and ensure components are powered off correctly.
- Avoid Physical Stress: Do not bend or apply excessive force to the memory modules.
- Environmental Conditions: Operate your laptop within recommended temperature and humidity ranges to protect all internal components, including RAM.
8. Troubleshooting
If you encounter issues after installing your A-Tech memory, consider the following troubleshooting steps:
| Problem | Possible Cause / Solution |
|---|---|
| Laptop does not boot or displays error codes/beeps. |
|
| System boots but does not recognize full RAM capacity. |
|
| System crashes or experiences instability after upgrade. |
|
If these steps do not resolve the issue, please contact A-Tech customer support for further assistance.
9. Warranty and Support
A-Tech memory modules are backed by A-Tech's Limited Lifetime Warranty, ensuring dependable and reliable performance. This warranty covers defects in materials and workmanship for the lifetime of the product.
All A-Tech memory modules undergo stringent quality control testing to ensure they meet high standards before reaching you.
Figure 9.1: A-Tech's commitment to reliability through quality control testing.
Customer Support:
For technical assistance, warranty claims, or any questions regarding your A-Tech product, please visit the official A-Tech website or contact their support team:
- Website: https://atechmemory.com/
- Support Page: https://atechmemory.com/pages/qr (for quick resources and support)
A-Tech's knowledgeable Tech Team is available to help before and after your purchase.
