BoxWave Stylus PortaPouch Instruction Manual

1. Introduction

The BoxWave Stylus PortaPouch is a portable, self-adhesive holder designed to keep your stylus or pen securely attached to your device or case. Its slim and sleek design ensures your writing tool is always within reach without adding bulk. This pouch is universally compatible with various styluses and pens, including those used with devices like the Corehan CS-JD-AN-03.

Image 1.1: The BoxWave Stylus PortaPouch, showcasing its design and material.

2. Setup Instructions

1. Prepare the Surface: Choose a clean, smooth, and dry surface on your device or case where you wish to attach the PortaPouch. Ensure there is no dust, oil, or moisture that could affect adhesion.
2. Peel the Backing: Carefully peel off the protective film from the adhesive backing of the PortaPouch.
3. Attach the Pouch: Align the PortaPouch to your desired location and firmly press it onto the surface. Apply even pressure for about 30 seconds to ensure strong adhesion.
4. Allow to Set: For optimal adhesion, it is recommended to wait a few minutes before inserting a stylus or pen.

Image 2.1: Demonstrating the peel-off adhesive backing for easy application.

3. Operating Instructions

Using the Stylus PortaPouch is straightforward:

1. Insert Stylus/Pen: Gently slide your stylus or pen into the elastic sleeve of the PortaPouch. The elastic material is designed to stretch and securely hold various sizes of writing instruments.
2. Remove Stylus/Pen: To retrieve your stylus or pen, simply pull it out from the sleeve. The elastic will return to its original shape, ready for the next use.

Image 3.1: Inserting a stylus into the PortaPouch.

Image 3.2: The PortaPouch's elastic design accommodates various stylus and pen sizes.

4. Maintenance

• Cleaning: If the exterior of the PortaPouch becomes dirty, gently wipe it with a soft, slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the material or adhesive.
• Adhesive Care: The self-adhesive backing is designed for a single, secure application. Repeated removal and reapplication may weaken the adhesive's bond.
• Storage: When not in use, store the PortaPouch in a cool, dry place away from direct sunlight or extreme temperatures to preserve its material integrity and adhesive quality.

5. Troubleshooting

• Pouch not adhering securely:
  • Ensure the application surface was thoroughly cleaned and dry before attachment.
  • Avoid applying to textured, porous, or oily surfaces, which may prevent proper adhesion.
  • If the adhesive has lost its stickiness due to repeated handling or improper application, it may not be possible to re-secure it effectively.
• Stylus/Pen not holding securely:
  • Verify that the stylus or pen diameter is appropriate for the elastic sleeve. While versatile, extremely thin items may not be held as tightly.
  • Over time, constant use with very thick items might slightly stretch the elastic.

6. Specifications

Image 6.1: Detailed dimensions of the Stylus PortaPouch.

7. Warranty and Support

For any questions, concerns, or support regarding your BoxWave Stylus PortaPouch, please contact BoxWave Corporation directly. Refer to the product packaging or the official BoxWave website for the most current contact information and warranty details.