RecPro RP-1057-60BTU

RecPro RV Tankless Hot Water Heater Instruction Manual

Model: RP-1057-60BTU | Brand: RecPro

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your RecPro RV Tankless Hot Water Heater. Designed for recreational vehicles, this 60,000 BTU on-demand gas heater delivers consistent hot water, enhancing your travel experience. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

Important Safety Information

WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment.

  • Ensure proper ventilation.
  • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
  • Verify all gas and water connections are secure and leak-free before operation.
  • Only qualified personnel should perform installation and service.
Diagram illustrating safety features of the RecPro RV Tankless Water Heater, including flameout protection, blower monitoring, and temperature monitoring.
Figure 1: Safety Features Overview. This diagram highlights key safety mechanisms such as flameout protection, blower monitoring, and temperature monitoring, which are integrated into the water heater's design for user safety.

Setup and Installation

This section outlines the general steps for installing your RecPro RV Tankless Hot Water Heater. Professional installation is recommended.

Pre-Installation Checklist:

  • Confirm correct model and door size (18" door for this unit).
  • Ensure adequate space for installation and ventilation.
  • Gather necessary tools and materials (e.g., sealant, wrenches, gas line fittings).
  • Verify RV's propane supply and 12V DC electrical system are compatible.

Installation Steps:

  1. Mounting: Securely mount the unit in the designated exterior compartment of your RV. Ensure the unit is level and properly sealed to prevent water intrusion.
  2. Gas Connection: Connect the RV's propane supply line to the 3/8" NPT propane fitting on the water heater. Use appropriate thread sealant and check for leaks using a leak detection solution.
  3. Water Connections: Connect the cold water inlet and hot water outlet lines. Ensure proper flow direction.
  4. Electrical Connection: Connect the 12V DC power supply to the unit's electrical terminals. Ensure correct polarity.
  5. Remote Control Installation: Install the wired remote control in a convenient interior location. Connect the remote cable to the water heater unit.
  6. Ventilation: Ensure the exhaust vent is clear and unobstructed. Do not block any openings on the exterior door.
RecPro RV Tankless Water Heater installed on the side of an RV, showing the white exterior door flush with the vehicle's wall.
Figure 2: Installed Unit. This image shows the RecPro RV Tankless Water Heater properly installed on the exterior of an RV, demonstrating how the white door integrates with the vehicle's design.
Close-up view of the RecPro RV Tankless Water Heater's components, including the 3/8 inch NPT propane fitting, the high-quality control board, and the convenient wired remote control.
Figure 3: Key Components. This image details the 3/8" NPT propane fitting for gas connection, the internal control board, and the wired remote control, illustrating the unit's main functional parts.

Operating Instructions

Your RecPro RV Tankless Hot Water Heater is designed for user-friendly operation via the wired remote control.

Remote Control Functions:

Close-up of the RecPro RV Tankless Water Heater's wired remote control, showing the power button, temperature display, up/down arrows for adjustment, and a Celsius/Fahrenheit toggle button.
Figure 4: Wired Remote Control. This image displays the digital remote control unit, featuring buttons for power, temperature adjustment, and unit selection (Celsius/Fahrenheit).
  • Power Button: Press to turn the unit ON or OFF.
  • Temperature Adjustment: Use the Up and Down arrows to set your desired hot water temperature. The maximum temperature is 122°F (50°C).
  • °C/°F Toggle: Press the C/F button to switch between Celsius and Fahrenheit temperature displays.
  • Display: The digital display shows the current output temperature.

Starting the Unit:

  1. Ensure propane supply is open and water supply is connected.
  2. Turn on the unit using the power button on the remote control.
  3. Set your desired temperature.
  4. Open a hot water faucet in your RV. The heater will automatically ignite and begin producing hot water.

The unit features a low water flow startup, ensuring efficient operation even with minimal water demand. Electronic gas modulation technology maintains a consistent hot water temperature.

Diagram illustrating the tankless system of the RecPro RV water heater, showing the main unit and the remote control with an arrow indicating temperature changes are made easily via the remote.
Figure 5: Tankless System Operation. This image demonstrates how the remote control interacts with the tankless water heater to easily adjust temperature settings, highlighting the on-demand hot water feature.

Maintenance

Regular maintenance ensures the longevity and efficient performance of your tankless water heater.

  • Annual Inspection: Have a qualified technician inspect the unit annually, including gas connections, water lines, and electrical components.
  • Ventilation Check: Periodically inspect the exhaust vent and air intake for obstructions (e.g., debris, insect nests). Keep the exterior door openings clear.
  • Winterization: In freezing temperatures, ensure the unit is properly winterized to prevent damage. This typically involves draining all water from the system and potentially using RV antifreeze. The unit has automatic freezing protection, but proper winterization is still crucial for RV systems.
  • Exterior Cleaning: Keep the exterior door clean. Do not use abrasive cleaners.

Troubleshooting

This section provides solutions for common issues you might encounter.

ProblemPossible CauseSolution
No hot water / Unit not ignitingNo propane supply, low water flow, electrical issue, remote off.Check propane tank and lines. Ensure adequate water pressure. Verify 12V power and remote is on.
Inconsistent water temperatureFluctuating water flow, incorrect temperature setting.Maintain consistent water flow. Adjust temperature setting on remote.
Unit cycles on and off rapidlyInsufficient water flow, air in lines.Increase water flow. Bleed air from hot water lines.
Error code on remoteSpecific system fault.Refer to the full owner's manual for a list of error codes and their corresponding solutions. Contact customer support if the issue persists.

For issues not listed here, or if troubleshooting steps do not resolve the problem, please contact RecPro customer support.

Specifications

BrandRecPro
Model NumberRP-1057-60BTU
Product Dimensions15"W x 15"H (Unit), 18" Door
BTU Rating60,000 BTU
Power SourceGas Powered (Propane)
Voltage12 Volts DC
Wattage20 Watts
Maximum Temperature122 Degrees Fahrenheit (50°C)
Special FeaturesAdjustable thermostat, Automatic freezing protection, Automatic ignition, Flame Failure Protection, Remote controlled
Item Weight20.3 pounds
Included ComponentsRemote control, Tankless hot water heater
UPC193652105800
Diagram showing the dimensions of the RecPro RP-1057 Tankless Gas Water Heater, indicating a 15 or 18 inch door option, 14.5 inches depth, and 12.5 inches height and width for the main unit.
Figure 6: Product Dimensions. This diagram illustrates the physical measurements of the RP-1057 unit, including the main body and the available door sizes (15" or 18").

Warranty Information

The RecPro RV Tankless Hot Water Heater comes with a 1 Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and to make a warranty claim, please refer to the official warranty documentation included with your product or contact RecPro customer support.

Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact RecPro customer support. You can find contact information on the RecPro website or in the packaging materials.

Visit the official RecPro store for more products and information: RecPro Store on Amazon

Related Documents - RP-1057-60BTU

Preview RECPRO 6.3 cu ft Gas and Electric RV Refrigerator User Manual RP-2165 RP-2166
User manual and installation guide for the RECPRO 6.3 cu ft Gas and Electric RV Refrigerator, models RP-2165 and RP-2166. Covers installation, operation, troubleshooting, and technical specifications.
Preview Klipsch Reference Premiere Series User Manual - Setup, Placement, and Connections
Comprehensive user manual for Klipsch Reference Premiere Series speakers, covering setup, room placement, connection guides, Dolby Atmos integration, care, and product registration. Includes model details for RP-8060FA, RP-8000F, RP-6000F, RP-5000F, RP-4000F, RP-600M, RP-500M, RP-400M, RP-502S, RP-402S, RP-500SA, RP-504C, RP-404C, RP-600C, RP-500C, RP-400C, and RP-160M.
Preview Klipsch Reference Premiere Speakers User Manual
User manual for Klipsch Reference Premiere speakers, covering setup, placement, connection, care, and warranty information. Features detailed specifications and diagrams for various models including RP-8060FA, RP-8000F, RP-6000F, RP-5000F, RP-4000F, RP-600M, RP-500M, RP-400M, RP-502S, RP-402S, RP-500SA, RP-504C, RP-404C, RP-600C, RP-500C, and RP-400C.
Preview Klipsch Reference Premiere Series User Manual and Speaker Specifications
Comprehensive user manual, installation guide, and technical specifications for the Klipsch Reference Premiere series of home audio speakers. Learn about room placement, connections, Dolby Atmos technology, care, and product details.
Preview PurePro® PROK-320 Single Handle Kitchen Faucet Installation Guide
Official installation guide for the PurePro® PROK-320 single handle kitchen faucet. Includes tools required, cleaning instructions, important warnings, step-by-step installation procedures, and a detailed parts breakdown.