VGR V-913 Cord/Cordless Hair Trimmer User Manual

1. Introduction

Thank you for choosing the VGR V-913 Cord/Cordless Hair Trimmer. This device is designed for precise and efficient hair trimming, suitable for both professional barber shop use and personal grooming. Please read this manual carefully before using the product to ensure safe and optimal performance. Keep this manual for future reference.

2. Safety Instructions

• Do not immerse the trimmer in water or other liquids.
• Keep the device away from children.
• Ensure the power voltage matches the specifications (110-240V).
• Do not use the trimmer if the blades are damaged, as this may cause injury.
• Avoid using the trimmer on irritated or broken skin.
• Unplug the trimmer before cleaning or performing any maintenance.
• Store the trimmer in a dry place when not in use.
• Only use the provided charging cable and accessories.

3. Package Contents

The VGR V-913 Hair Trimmer package includes the following items:

• 1 x VGR V-913 Hair Trimmer
• 3 x Attachment Guide Combs (1mm, 2mm, 3mm)
• 1 x USB Type-C Charging Cable
• 1 x Cleaning Brush
• 1 x Lubricating Oil
• 1 x Protective Blade Cover
• 1 x Instruction Manual

4. Product Overview

The VGR V-913 features a high-quality design for efficient and comfortable grooming.

Image 1: The VGR V-913 Hair Trimmer in gold finish.

Key Features:

• BLDC Brushless Motor: Provides long-lasting performance, designed for over 10000 hours of use.
• USB Type-C Charging: Convenient charging anywhere you need.
• Longer Work Time: Equipped with a 2000mAh Li-ion battery, offering up to 200 minutes of cordless operation after a 3-hour charge.
• LED Display: Clearly shows the remaining power percentage and indicates when oiling is needed.
• Precise and Sharp Blades: Self-sharpening ceramic and powder metallurgical blades with an R-shaped angle design for smooth, snag-free trimming and skin protection.

Image 2: Illustration of key features including BLDC motor, USB charging, long work time, and LED display.

Image 3: Close-up view of the LED display and the ceramic and powder metallurgical blade.

5. Setup

1. Unpack: Carefully remove all components from the packaging.
2. Inspect: Check the trimmer and accessories for any signs of damage.
3. Initial Charge: Before first use, fully charge the trimmer for approximately 3 hours. Refer to the 'Charging' section for details.
4. Lubricate Blades: Apply a few drops of the included lubricating oil to the blades before the first use and after each cleaning to ensure smooth operation and longevity.

6. Charging

The VGR V-913 trimmer can be used cordlessly or while plugged in. It features a 2000mAh Lithium-ion battery.

• Connect the USB Type-C charging cable to the trimmer's charging port.
• Plug the other end of the USB cable into a compatible USB power adapter (not included) or a USB port.
• The LED display will show the charging status and battery percentage.
• A full charge takes approximately 3 hours and provides up to 200 minutes of cordless operation.
• The trimmer has overcharge protection to prevent battery damage.

Image 4: Visual representation of battery capacity, charge time, and work time.

7. Operating Instructions

Turning On/Off:

Press the single power button to turn the trimmer on or off.

Attaching Guide Combs:

Select the desired guide comb (1mm, 2mm, or 3mm) for your preferred hair length. Align the comb with the trimmer blade and snap it into place securely. To remove, gently pull the comb away from the blade.

Image 5: The VGR V-913 trimmer shown with various guide combs.

Trimming Hair:

1. Ensure hair is clean and dry for best results, though the trimmer can also handle wet hair.
2. Start with a longer guide comb if you are unsure of the desired length.
3. Hold the trimmer with the blades pointing upwards and move it against the direction of hair growth.
4. Use smooth, even strokes.
5. For edging and detailing, remove the guide comb and use the bare blade carefully. The R-shaped blade design helps protect the skin.

8. Maintenance

Cleaning the Trimmer:

1. Turn off the trimmer and unplug it from the power source.
2. Remove any attached guide combs.
3. Use the included cleaning brush to remove loose hairs from the blades and the trimmer body.
4. For a more thorough clean, the blades can be carefully detached (refer to specific instructions if provided in the full manual, otherwise proceed with caution).
5. Do not rinse the entire trimmer under water unless explicitly stated as waterproof.

Oiling the Blades:

After each cleaning or approximately once a month, apply 1-2 drops of the lubricating oil onto the blades. Turn the trimmer on for a few seconds to distribute the oil evenly. This maintains blade sharpness and prevents rust.

Image 6: Close-up of the trimmer blade for maintenance reference.

9. Troubleshooting

10. Specifications

• Model Number: V-913
• Power Source: Battery Powered (Cord/Cordless)
• Battery Type: 2000mAh Lithium-ion
• Charging Time: Approximately 3 hours
• Operating Time: Up to 200 minutes
• Voltage: 110-240V, 50/60Hz
• Blade Material: Stainless Steel (Ceramic and Powder Metallurgical)
• Minimum Cutting Length: 1mm
• Maximum Cutting Length: 3mm (with guide combs)
• Connector Type: USB-C
• Item Dimensions (L x W x H): 19.5 x 13 x 7.5 cm
• Item Weight: 490 grams
• Special Features: USB Charging, Charging Indicator Light, Rechargeable, LED Display
• Recommended Uses: Moustache, Beard, Body, Head, Face
• Target Audience: Men, Adults

11. Warranty and Support

VGR offers a 12-month quality guarantee for the VGR V-913 Hair Trimmer. Our products are designed for professional-grade performance, ensuring smooth and precise cuts every time.

If you encounter any problems with this product, please do not hesitate to contact our customer service team. We are committed to providing 100% risk-free service and will respond to your inquiries within 24 hours to offer solutions.

For support, please refer to the contact information provided with your purchase or visit the official VGR website.