Franke WD-900

Franke WD-900 Colorline Garbage Disposal Flange Kit Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Franke WD-900 Colorline Garbage Disposal Flange Kit. Designed to complement Franke Granite sinks, this flange kit offers a seamless and integrated appearance for your kitchen. The Colorline waste kits are crafted with full color throughout and include a special UV additive to prevent fading. They are built to withstand high temperatures, resist scratches and stains, and are food contact safe.

Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

2. Safety Information

Observe the following safety precautions during installation and use:

3. Package Contents

Verify that all components are present before beginning installation:

Franke WD-900 Colorline Garbage Disposal Flange Kit in Matte Black

Image: Franke WD-900 Colorline Garbage Disposal Flange Kit. This image displays the matte black flange and stopper, designed for integration with a garbage disposal unit. The flange features a wide rim and a removable stopper with drainage slots.

4. Setup and Installation

This flange kit is designed to be installed with a compatible garbage disposal unit. The following steps outline a general installation process. Refer to your garbage disposal unit's manual for specific instructions regarding its connection to the flange.

  1. Preparation: Ensure the sink opening is clean and free of debris. Turn off the power to the garbage disposal at the circuit breaker.
  2. Remove Old Flange (if applicable): If replacing an existing flange, disconnect the garbage disposal from the old flange and remove all old components from the sink opening. Clean any old plumber's putty or sealant.
  3. Apply Plumber's Putty: Roll a thin rope of plumber's putty and apply it around the underside edge of the new Franke WD-900 flange.
  4. Insert Flange: Insert the flange into the sink drain opening from above, pressing firmly to create a seal with the putty.
  5. Install Mounting Assembly: From underneath the sink, slide the rubber gasket, fiber gasket, and mounting ring onto the flange. Secure these components with the provided screws or bolts, tightening them evenly until the flange is snug and the putty squeezes out from under the rim. Wipe away excess putty.
  6. Connect Garbage Disposal: Attach the garbage disposal unit to the newly installed flange's mounting assembly according to the disposal unit's manufacturer instructions. Ensure all connections are tight and secure.
  7. Test for Leaks: Once installation is complete, fill the sink with water and check for any leaks around the flange and disposal connections. Tighten any leaking connections as needed.
  8. Restore Power: Turn the electrical power back on at the circuit breaker.

5. Operating Instructions

The Franke WD-900 Colorline Flange Kit includes a stopper/basket strainer for convenient use:

6. Maintenance and Care

To maintain the appearance and functionality of your Franke WD-900 Colorline Flange Kit:

7. Troubleshooting

If you encounter issues with your Franke WD-900 Colorline Flange Kit, consider the following:

For issues not resolved by these steps, contact Franke customer support or a qualified plumber.

8. Specifications

FeatureDetail
Model NumberWD-900
BrandFranke
ColorMatte Black
MaterialMetal and Plastic
Diameter4-1/2 inches
Height2-11/16 inches
Product Dimensions4.5 x 4.5 x 2.06 inches
UPC612986090823

9. Warranty and Support

The Franke WD-900 Colorline Garbage Disposal Flange Kit is covered under Franke's 1-year warranty. This warranty typically covers manufacturing defects and material flaws under normal use.

For warranty claims, technical assistance, or further support, please contact Franke customer service. Keep your proof of purchase for warranty validation.

Contact information for Franke can typically be found on their official website or product packaging.

Related Documents - WD-900

Preview Franke Sinks: Global Contacts and Installation Guide
Find Franke kitchen sink contact information worldwide and access installation and maintenance guidance, including product details for the Franke Maris MRX 110-40.
Preview Franke Sinks Installation and User Manual
Comprehensive installation and user manual for Franke sinks, covering various models and installation types. Includes safety guidelines, care instructions, and global contact information.
Preview FRANKE Food Waste Disposer TE-50, TE-75, TE-75S, TE-125, TE-125BF User and Installation Manual
Comprehensive user and installation manual for FRANKE Food Waste Disposers, models TE-50, TE-75, TE-75S, TE-125, and TE-125BF. Covers safety, components, installation, operation, troubleshooting, maintenance, and disposal.
Preview Franke Trendline Plus 70 Range Hood Installation Manual
Detailed installation guide for the Franke Trendline Plus 70 range hood, covering safety precautions, parts identification, and step-by-step assembly instructions for optimal kitchen ventilation. Model: 321.0536.200.
Preview Franke Active L Twist Pull-Out Faucet Parts Diagram and Information
Detailed parts list and diagram for the Franke Active L Twist pull-out kitchen faucet (model 115.0669.769), featuring 2 jets in matte black. Includes component numbers and validation date.
Preview Franke FST PLUS BK 608 Matte Black Built-in Kitchen Hood | Model 305.0717.355
Detailed specifications and features for the Franke FST PLUS BK 608 matte black built-in kitchen hood, including dimensions, energy efficiency, performance data, and installation details.