roborock Qrevo S Robot Vacuum and Mop User Manual

Introduction

Welcome to the roborock Qrevo S Robot Vacuum and Mop. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal cleaning performance and longevity. Please read this manual thoroughly before first use.

Important Safety Information

To reduce the risk of injury or damage, read these safety instructions carefully and keep them for future reference.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Use only the original power adapter provided by the manufacturer.
• Do not use the robot on wet surfaces or in environments with standing water.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not operate the robot in a room where an infant or child is sleeping.
• Do not use the robot to pick up large objects, sharp objects, or burning/smoking materials.
• Ensure the charging dock is placed on a level surface and away from heat sources.

Package Contents

Verify that all items are included in your package:

• Robot Vacuum (1)
• Multifunctional Dock (1)
• Dock Base (1)
• Power Cable (1)
• Disposable Dust Bag (1)
• Rotating Mop Module (2)
• User Manual (1)

The roborock Qrevo S package includes the robot vacuum, the multifunctional dock, power cable, disposable dust bag, two rotating mop modules, and the user manual.

Product Overview

Familiarize yourself with the main components and advanced features of your roborock Qrevo S.

Multifunctional Dock

The dock provides automated maintenance for your robot, minimizing manual effort.

The multifunctional dock provides automated maintenance, including self-washing of mop pads, hot air drying, automatic dustbin emptying, and water tank refilling, significantly reducing manual intervention.

Powerful Suction and Mopping

The Qrevo S features robust cleaning capabilities for various floor types.

Equipped with 7000Pa suction power, the robot effectively removes dust, dirt, and pet hair from various floor types, including carpets and hard floors.

Dual spinning mops rotate at 200 RPM to effectively scrub and remove stubborn stains. Water flow can be adjusted via the app for customized cleaning.

Smart Navigation and Obstacle Avoidance

Advanced technology ensures efficient and safe cleaning.

Reactive Tech Obstacle Avoidance allows the robot to detect and navigate around household objects, preventing collisions and ensuring smooth cleaning.

The 10mm auto mop lifting feature prevents wetting carpets during mopping cycles, ensuring seamless transitions between different floor surfaces.

Setup Guide

1. Unpacking

1. Remove the robot and all accessories from the packaging.
2. Remove all protective films and packing materials from the robot and the dock.

2. Dock Placement

1. Place the multifunctional dock on a hard, level surface against a wall.
2. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides of the dock and 1.5 meters (4.9 feet) in front.
3. Connect the power cable to the dock and plug it into a wall outlet.

3. Initial Charging

1. Place the robot onto the charging dock. Ensure the charging contacts on the robot align with those on the dock.
2. The robot will automatically power on and begin charging. Allow it to fully charge before first use (approximately 4-6 hours).

4. App Connection

1. Download the "Roborock" app from the App Store (iOS) or Google Play Store (Android).
2. Open the app and create an account or log in.
3. Tap "Add Device" and follow the in-app instructions to connect your Qrevo S to your home Wi-Fi network (2.4G WiFi only).

Operating Instructions

Starting a Clean

• Manual Start: Press the Power button on the robot once to start a full cleaning cycle. Press again to pause.
• App Control: Open the Roborock app, select your device, and tap "Clean" to start. You can also select specific rooms or zones to clean.

Cleaning Modes

• Vacuum Only: Ideal for carpets or when mopping is not desired.
• Mop Only: For hard floors that require mopping without vacuuming.
• Vacuum & Mop: The default mode for comprehensive cleaning of mixed floor types.

App Control Features

The Roborock app offers extensive customization and control over your cleaning experience.

The Roborock app provides comprehensive control over the robot, allowing for custom routines, cleaning intensity settings, multi-level mapping, and smart suggestions for restricted areas.

• Scheduling: Set specific times for the robot to clean automatically.
• No-Go Zones & Invisible Walls: Define areas the robot should avoid.
• Multi-level Mapping: Store maps for up to 4 different levels of your home.
• Carpet Settings: Customize how the robot handles carpets (e.g., Carpet Boost, Deep Carpet Cleaning, Vacuum Carpet First).
• Water Flow Adjustment: Adjust the mop's water output for different floor types and cleaning needs (30 levels available).

The robot offers specialized carpet care options such as Deep Carpet Cleaning for thorough vacuuming, 'Carpet First' mode to vacuum carpets before mopping, and 'Carpet Boost' for increased suction on carpets.

Maintenance

Regular maintenance ensures your roborock Qrevo S operates at peak performance.

Dustbin and Filter

• Emptying: The dock automatically empties the dustbin. Replace the disposable dust bag in the dock every 7 weeks or when full.
• Cleaning Filter: The washable filter in the robot's dustbin should be rinsed with water every two weeks and air-dried completely before reinstallation.

Mop Pads

• Cleaning: The dock automatically washes the mop pads. For deeper cleaning, remove the mop modules and hand wash the pads with water.
• Replacement: Replace mop pads every 3-6 months depending on usage.

Brushes

• Main Brush: Remove and clean the main brush weekly. Use the cleaning tool to cut and remove tangled hair.
• Side Brush: Check the side brush monthly for tangled hair or debris. Remove and clean if necessary.

Sensors and Charging Contacts

• Wipe all sensors (cliff sensors, wall sensor, Reactive Tech sensor) and charging contacts on both the robot and the dock with a soft, dry cloth monthly.

Water Tanks (Dock)

• Regularly clean the clean water tank and dirty water tank in the dock to prevent mold and odors. Rinse with clean water and allow to air dry.

Troubleshooting

Refer to this table for common issues and their solutions.

Specifications

Detailed technical specifications for the roborock Qrevo S.

Warranty and Customer Support

Your roborock Qrevo S Robot Vacuum and Mop comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please visit the official roborock website or contact their customer service. You can also find the full user manual in PDF format here.