Artiss 6-Drawer Chest of Drawers Instruction Manual

1. Introduction

Thank you for purchasing the Artiss 6-Drawer Chest of Drawers. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image 1.1: The Artiss 6-Drawer Chest of Drawers, featuring a white body with an oak wood-look top and base.

2. Safety Information

To prevent injury and damage to the product, please adhere to the following safety guidelines:

• Anti-Tip Device: It is highly recommended to secure this furniture to the wall using the provided anti-tip kit. Unsecured furniture can tip over, causing serious or fatal injuries.
• Weight Limits: Do not exceed the maximum weight capacity for the top surface (50 kg) and individual drawers (10 kg). Overloading can compromise stability and structural integrity.
• Assembly: Assemble the unit on a soft, clean surface to prevent scratches. Ensure all parts are correctly installed and fasteners are tightened before use.
• Children: Keep children away from the assembly area. Do not allow children to climb on or play with the drawers.
• Placement: Place the chest of drawers on a level surface. Uneven surfaces can lead to instability.

Image 2.1: The chest of drawers highlighting ample storage and the inclusion of anti-tip kits for safety.

3. Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Top Panel (1)
• Side Panels (2)
• Base Panel (1)
• Back Panel (1)
• Drawer Fronts (6)
• Drawer Side Panels (12)
• Drawer Back Panels (6)
• Drawer Bottom Panels (6)
• Drawer Runners (12 pairs)
• Hardware Kit (screws, dowels, cam locks, anti-tip kit)

4. Assembly Instructions

A Phillips head screwdriver is required for assembly (not included).

1. Prepare the Workspace: Clear a spacious area and lay down a blanket or cardboard to protect the furniture panels and your floor from scratches.
2. Assemble the Main Frame: Attach the side panels to the base panel and then to the top panel using the provided dowels and cam locks. Ensure all connections are secure.
3. Install Drawer Runners: Securely attach the drawer runners to the inner sides of the main frame using the designated screws. Ensure they are level and aligned.
4. Assemble Drawers: For each of the six drawers, connect the side panels, back panel, and bottom panel to the drawer front. Install the corresponding drawer runners to the sides of each assembled drawer.
5. Insert Drawers: Carefully slide each assembled drawer into its respective slot in the main frame, ensuring the runners engage smoothly.
6. Attach Back Panel: Secure the back panel to the rear of the chest using small nails or screws.
7. Install Anti-Tip Kit: Follow the instructions provided with the anti-tip kit to securely fasten the chest of drawers to a wall stud. This step is crucial for safety.

Image 4.1: Detail showing the handle-less facade and smooth drawer runners, essential for assembly.

Image 4.2: An internal view of a drawer, illustrating its spacious design and internal dimensions (28.5cm depth, 47.5cm width, 10cm height).

5. Operating Instructions

The Artiss 6-Drawer Chest of Drawers is designed for convenient storage in bedrooms or living areas.

• Opening/Closing Drawers: The drawers feature a handle-less design. To open, gently pull the top or bottom edge of the drawer front. To close, push the drawer firmly until it is flush with the cabinet frame. The smooth anti-rust runners ensure easy operation.
• Loading Drawers: Distribute weight evenly within each drawer. Do not exceed the 10 kg weight limit per drawer.
• Top Surface Use: The top surface can hold up to 50 kg. Avoid placing excessively heavy items or items that could scratch the surface.

Image 5.1: The chest of drawers demonstrating its practical design and indicating weight capacities for the top surface (50kg) and drawers (10kg).

6. Maintenance

Proper care will extend the life and appearance of your chest of drawers.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
• Spills: Clean spills immediately to prevent staining or damage to the engineered wood.
• Fasteners: Periodically check all screws and fasteners to ensure they remain tight. Retighten as necessary.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.

7. Troubleshooting

If you encounter issues with your chest of drawers, refer to the following common solutions:

• Drawers are Sticking/Not Smooth:
  • Check that the drawer runners are correctly installed and aligned.
  • Ensure the drawer is not overloaded.
  • Verify that all screws securing the runners are tight.
• Chest is Wobbly:
  • Ensure the chest is placed on a level surface.
  • Check all frame fasteners and tighten any loose screws.
  • Confirm the anti-tip device is properly installed and secured to the wall.
• Missing Parts: If you discover missing parts during assembly, please contact Artiss customer support with your purchase details.

8. Specifications

Image 8.1: Dimensional overview of the Artiss 6-Drawer Chest of Drawers (110cm length, 40cm width, 68.5cm height, 17cm drawer height, 55cm drawer depth).

9. Warranty and Support

Artiss products come with a standard manufacturer's warranty. For specific warranty terms, please refer to your purchase documentation or the Artiss official website. If you require assistance with assembly, have questions about your product, or need to report missing/damaged parts, please contact Artiss customer support through the retailer where you purchased the item.

Please have your model number (FUR-U-CDR-6D-WHWD-AB) and proof of purchase ready when contacting support.