Artiss FUR-U-CDR-6D-WH-AB

Artiss 6-Drawer Chest of Drawers Instruction Manual

Model: FUR-U-CDR-6D-WH-AB

Introduction

Thank you for purchasing the Artiss 6-Drawer Chest of Drawers. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Artiss 6-Drawer Chest of Drawers, front view

Figure 1: Front view of the assembled Artiss 6-Drawer Chest of Drawers.

Important Safety Information

Failure to follow these safety instructions may result in injury or damage to the product. Always prioritize safety during assembly and use.

Warning label regarding furniture tip-over hazards

Figure 2: Warning label detailing furniture tip-over prevention. Always secure the unit with an anchor device.

Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

Product Specifications

Dimensions of the Artiss 6-Drawer Chest of Drawers

Figure 3: Key dimensions of the chest of drawers.

FeatureDetail
BrandArtiss
Model NumberFUR-U-CDR-6D-WH-AB
ColourWhite
Product Dimensions (L x W x H)120 cm x 40 cm x 71.5 cm
Item Weight41.2 kg
MaterialEngineered Wood (MDF Particleboard)
Number of Drawers6
Special FeaturesSoft Close, Storage Drawer, Smooth Anti-Rust Runners
Top Panel CapacityUp to 50 kg
Drawer CapacityUp to 10 kg per drawer
Practical design showing weight capacities for top and drawers

Figure 4: Weight capacity details for the chest of drawers.

Assembly Instructions

Please read all steps before beginning. It is recommended to have two people for assembly. Lay out all components on a soft, clean surface to prevent damage.

Tools Required (Not Included):

Step-by-Step Assembly:

  1. Prepare the Main Frame:

    Attach the side panels to the bottom panel using the provided dowels and cam locks/screws. Ensure the pre-drilled holes for drawer runners are facing inwards. Secure the top panel in a similar manner.

  2. Install Cabinet Drawer Runners:

    Attach the cabinet portion of the drawer runners to the inner sides of the main frame. Ensure they are level and aligned according to the pre-drilled holes. The smooth anti-rust runners are designed for easy operation.

  3. Assemble Drawers (Repeat for all 6 drawers):

    Connect the drawer side panels to the drawer front and back panels using dowels and screws. Slide the drawer bottom panel into the grooves. Attach the drawer portion of the runners to the outer sides of the assembled drawer box. Finally, attach the handles/knobs to the drawer fronts.

    Close-up of a drawer showing spacious design, smooth runners, and sturdy base

    Figure 5: Detail of a drawer, highlighting spaciousness and smooth runners.

  4. Insert Drawers:

    Carefully align the drawer runners with the cabinet runners and slide each assembled drawer into its designated slot. Test each drawer for smooth operation.

    Artiss 6-Drawer Chest of Drawers with all drawers partially open, showing ample storage

    Figure 6: The chest of drawers with all six drawers open, demonstrating ample storage.

  5. Attach Back Panel:

    Secure the back panel to the rear of the main frame using small nails or screws. Ensure it is flush and square.

  6. Install Anti-Tip Kit:

    This step is critical for safety. Attach the anti-tip bracket to the top rear of the chest of drawers and secure the strap to a wall stud using appropriate hardware. Follow the instructions provided with the anti-tip kit carefully.

Operating Instructions

The Artiss 6-Drawer Chest of Drawers is designed for storing clothing, linens, and other household items. To ensure longevity and safety:

Care and Maintenance

Proper care will help maintain the appearance and functionality of your chest of drawers.

Troubleshooting

ProblemPossible CauseSolution
Drawers do not slide smoothly.Misaligned runners, debris in runners, loose screws.Check runner alignment. Clean runners. Tighten all screws on drawer and cabinet runners.
Drawers are difficult to close completely.Overloaded drawer, obstruction, misaligned runners.Reduce contents in the drawer. Check for obstructions. Verify runner alignment.
Unit feels wobbly or unstable.Loose fasteners, uneven floor, anti-tip kit not installed.Ensure all assembly screws are tightened. Place on a level surface or use shims. Install the anti-tip kit immediately.
Gap between drawer front and frame.Drawer front not properly aligned or secured.Adjust drawer front screws or re-seat the drawer.

Warranty and Customer Support

For warranty information or assistance with your Artiss product, please refer to your purchase documentation or visit the official Artiss store.

Artiss Store: Visit the Artiss Store on Amazon.com.au

When contacting support, please have your model number (FUR-U-CDR-6D-WH-AB) and purchase details ready.

Related Documents - FUR-U-CDR-6D-WH-AB

Preview Artiss Gas-Lift Bed Frame Assembly Instructions - Model BFRAME-G-LED-LUMI-D/Q
Detailed assembly instructions for the Artiss Gas-Lift Bed Frame (Double/Queen Size), Model BFRAME-G-LED-LUMI-D/Q. Includes parts list, hardware list, and step-by-step guidance for assembly.
Preview Gracie Oaks 5-Drawer Dresser with Cabinet Assembly Instructions
Detailed assembly instructions for the Gracie Oaks 5-Drawer Dresser with Cabinet, featuring a sliding barn door. Includes parts list, hardware list, and step-by-step guidance for safe and correct assembly.
Preview Oakham 4-Drawer Chest Assembly Instructions
Comprehensive assembly guide for the Oakham 4-drawer chest, detailing parts, hardware, and step-by-step instructions for a secure and proper build. Includes safety warnings and contact information for support.
Preview PWS-CD1100-WH 3 + 3 Drawer Chest Assembly Instructions | Cenports
Detailed, step-by-step assembly instructions for the Cenports PWS-CD1100-WH 3 + 3 Drawer Chest. Includes parts list, hardware identification, safety warnings, and care tips for easy setup.
Preview EDGEWOOD 5-Drawer Cabinet Installation Guide (CAB-5-WH)
Comprehensive installation and assembly guide for the EDGEWOOD 5-Drawer Cabinet (Model CAB-5-WH). This document details parts, tools, step-by-step instructions, and maintenance for the white MDF mobile filing cabinet.
Preview U.S. GENERAL 72" Triple Bank Roller Cabinet Owner's Manual & Safety Instructions
Comprehensive owner's manual, safety instructions, assembly guide, operation procedures, maintenance tips, and warranty information for the U.S. GENERAL 72" Triple Bank Roller Cabinet (Model 70382 and others).