User Manual for amazon basics X20G Bluetooth Soundbar

Introduction

Thank you for purchasing the amazon basics X20G 16W Bluetooth Soundbar. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new soundbar. Please read this manual thoroughly before using the product to ensure proper and safe operation.

Product Overview

The amazon basics X20G is a versatile 16W Bluetooth soundbar designed to enhance your audio experience. It features dual 8W drivers, 2X bass reflex technology, RGB lights, and multiple connectivity options including Bluetooth 5.3, AUX, and USB. A built-in 2000mAh battery provides up to 7 hours of playback.

Front view of the amazon basics X20G Bluetooth Soundbar, showcasing its sleek black design and integrated RGB light strip.

Illustration highlighting the 16 Watt RMS audio output power of the soundbar, indicating its capability for clear and dynamic sound.

Image emphasizing the 2X Power Bass feature, designed to deliver enhanced depth and clarity in low-frequency audio.

Setup

1. Unpacking: Carefully remove the soundbar and all accessories from the packaging. Retain the packaging for future storage or transport.
2. Placement: Place the soundbar on a stable, flat surface, preferably below your television or monitor for optimal audio projection. Ensure there is adequate ventilation around the unit.
3. Power Connection: Connect the provided USB charging cable to the Type-C port on the soundbar and the other end to a compatible USB power adapter (not included) or a USB port on your device.
4. Initial Charge: For first-time use, it is recommended to fully charge the soundbar's battery. The charging indicator will show the charging status.

Operating Instructions

Power On/Off

• To power on the soundbar, locate the ON/OFF switch on the back panel and slide it to the "ON" position.
• To power off the soundbar, slide the ON/OFF switch to the "OFF" position.

Volume Control

• Use the volume control buttons on the soundbar or connected device to adjust the audio level.

Mode Selection

• Press the "M" (Mode) button on the soundbar to cycle through available input modes: Bluetooth, AUX, USB, and Micro SD.

Connectivity Options

The amazon basics X20G soundbar offers multiple ways to connect your audio sources.

Rear panel of the soundbar showing the various connectivity ports: Type-C for charging, TF (Micro SD) card slot, USB port, and AUX input.

Bluetooth 5.3 Connection

1. Power on the soundbar. It will automatically enter Bluetooth pairing mode (indicated by a flashing LED).
2. On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
3. Select "amazon basics X20G" from the list of devices.
4. Once paired, the LED indicator will become solid, and you can begin playing audio wirelessly.

AUX (Auxiliary) Connection

• Connect one end of a 3.5mm audio cable (not included) to the AUX port on the soundbar.
• Connect the other end of the cable to the audio output (headphone jack) of your device.
• Press the "M" button on the soundbar to switch to AUX mode.

USB Playback

• Insert a USB flash drive containing audio files into the USB port on the soundbar.
• The soundbar will automatically switch to USB mode and begin playing audio from the drive. If not, press the "M" button to select USB mode.

Micro SD Card Playback

• Insert a Micro SD card containing audio files into the TF (Micro SD) card slot on the soundbar.
• The soundbar will automatically switch to Micro SD mode and begin playing audio from the card. If not, press the "M" button to select Micro SD mode.

Charging the Battery

The soundbar is equipped with a 2000mAh rechargeable Li-ion battery, providing up to 7 hours of playback on a full charge.

Visual representation of the soundbar's 2000mAh internal battery, indicating its portable power source.

Image illustrating the soundbar's capability for up to 7 hours of continuous playtime on a single charge.

• Connect the provided USB Type-C cable to the soundbar's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port).
• The charging indicator light will illuminate during charging and turn off or change color when fully charged (refer to product specific LED behavior if available, otherwise general statement).
• A full charge typically takes approximately 3-4 hours.

RGB Lights

The soundbar features dynamic RGB lights that can enhance your listening environment.

The soundbar displaying its dynamic RGB lighting feature, which adds a visual element to the audio experience.

• To toggle the RGB lights on or off, use the dedicated light control button on the soundbar (if available, otherwise assume integrated with power/mode).
• The lights may cycle through various colors or patterns automatically.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the soundbar. Do not use liquid cleaners or abrasive chemicals.
• Storage: When not in use for extended periods, store the soundbar in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the soundbar regularly, even if not in use.

Troubleshooting

Specifications

• Model: X20G
• Brand: amazon basics
• Speaker Output Power: 16 Watts (2 x 8W drivers)
• Connectivity: Bluetooth 5.3, Auxiliary (3.5mm), USB, Micro SD
• Battery: 2000mAh Li-ion rechargeable
• Playback Time: Up to 7 hours (at 70% volume)
• Audio Output Mode: Stereo
• Mounting Type: Tabletop Mount
• Features: 2X Bass Reflex Technology, RGB Lights

Warranty and Support

This amazon basics X20G Bluetooth Soundbar comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For warranty claims or technical support, please contact amazon basics customer service through the official Amazon website or your purchase platform. Please have your proof of purchase and product model number ready when contacting support.

Online Support: Visit the amazon basics Store on Amazon for FAQs and additional product information.