onerbl 20V 1.2A AC/DC Adapter Charger User Manual

Introduction

This manual provides essential instructions for the safe and efficient use of your onerbl 20V 1.2A AC/DC Adapter Charger. This power supply is designed for compatibility with Roborock S7 MaxV and S7+ robot vacuum cleaners, specifically models CDZ11RR and CDZ12RR, which utilize a 14.4V Lithium-ion battery docking charger system. Please read this manual thoroughly before use and retain it for future reference.

Important Safety Information

• Ensure the adapter's voltage and current specifications match your device's requirements before connecting.
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the adapter to strong impacts.
• Do not attempt to disassemble or repair the adapter. Refer to qualified service personnel.
• Unplug the adapter from the power outlet when not in use for extended periods.
• Keep out of reach of children.

This image illustrates the built-in safety features of the onerbl AC/DC Adapter, including protection against short-circuits, over-voltage, and over-current, ensuring safe operation.

Package Contents

Upon opening the package, verify that all components are present and undamaged:

• 1 x onerbl 20V 1.2A AC/DC Adapter Charger

Setup Instructions

1. Inspect the Adapter: Before first use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
2. Connect to Device: Insert the DC output connector of the onerbl adapter into the designated power input port on your Roborock S7 MaxV or S7+ robot vacuum's docking station (models CDZ11RR or CDZ12RR). Ensure a firm connection.
3. Connect to Power Outlet: Plug the AC input prongs of the adapter into a standard 100-240V AC wall outlet.
4. Verify Connection: Once connected, the docking station should indicate power, and your robot vacuum should begin charging when placed on the dock.

This image displays the onerbl AC/DC Adapter Charger, showing its front with the AC prongs and a side view, illustrating its compact design.

Operating Instructions

The onerbl AC/DC Adapter Charger is designed for continuous power supply to your Roborock robot vacuum's docking station. Once properly set up, it provides the necessary power for charging the robot's 14.4V Lithium-ion battery.

• Place your Roborock S7 MaxV or S7+ robot vacuum onto its docking station.
• Ensure the robot makes proper contact with the charging terminals on the dock.
• The robot vacuum's indicator lights or display should show that it is charging. Refer to your Roborock vacuum's user manual for specific charging indicators.
• The adapter is designed to provide a stable 20V DC output at 1.2A (1200mA) to the docking station.

Maintenance and Care

• Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid wrapping the cable too tightly around the adapter.
• Cable Care: Regularly check the power cord for any cuts, fraying, or damage. Do not use the adapter if the cord is damaged.

Troubleshooting

Specifications

This image provides the physical dimensions of the onerbl AC/DC Adapter Charger and its cable length for reference.

Warranty and Support

For warranty information or technical support, please refer to the seller's policy or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Seller: GreatComputerParts

Manufacturer: Shenzhen Waweis Technology Co., Ltd