1. Introduction
Thank you for choosing the GOLDFAN Round Tempered Glass Dining Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new dining table. Please read these instructions carefully before assembly and retain them for future reference.
Image 1.1: The GOLDFAN Round Tempered Glass Dining Table, showcasing its modern design with a clear glass top and silver metal legs, placed in a bright room.
2. Safety Information
- Always assemble the table on a soft, clean surface to prevent scratches.
- Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand or sit on the table.
- Avoid placing excessively hot or cold items directly on the glass surface without protective coasters.
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Handle the tempered glass top with care to avoid impacts that could cause breakage.
3. Package Contents
Before beginning assembly, please verify that all components are present and undamaged. You should receive one package containing the following:
- Tempered Glass Tabletop
- Metal Leg Components
- Assembly Hardware (screws, bolts, washers, Allen key)
- Detailed Installation Instructions
4. Assembly Instructions
Assembly of this table is designed to be straightforward and can typically be completed by one person. Follow these steps carefully:
- Prepare the Area: Clear a spacious area and lay down a soft blanket or cardboard to protect the tabletop and floor during assembly.
- Attach Legs to Base: Identify the metal leg components. Begin by attaching one leg to the central support structure, tightening it to about 80%. Then, attach the square connecting piece, followed by the remaining legs.
- Secure All Legs: Once all legs and the central connector are in place, fully tighten all screws and bolts to ensure stability.
- Attach Tabletop: Carefully place the tempered glass tabletop onto the assembled leg structure. Ensure it is centered and aligned with the mounting points. Secure the tabletop using the provided fasteners.
- Install Anti-Slip Feet: Attach the anti-slip feet to the bottom of each leg. These protect your floors and carpets.
- Final Check: Gently lift and shake the table to confirm all connections are secure and the table is stable.
Image 4.1: A diagram illustrating the dimensions of the GOLDFAN Round Tempered Glass Dining Table, showing a diameter of 80cm and a height of 75cm.
Image 4.2: A close-up view highlighting the 8mm thick transparent tempered glass tabletop, emphasizing its robust and safe construction.
Image 4.3: A detailed image showing the anti-slip foot at the base of a table leg, designed to protect carpets and floors.
5. Usage Guidelines
This GOLDFAN dining table is designed for versatile use in various home settings. Its moderate size is suitable for 2-4 people, making it ideal for:
- Family meals in compact spaces.
- Intimate gatherings.
- Reading or enjoying tea.
- As a decorative piece against a wall.
Image 5.1: The dining table set up in a modern kitchen with four white chairs, demonstrating its suitability for small to medium-sized households.
Image 5.2: The dining table with four white chairs in a dining room setting, highlighting its elegant appearance.
6. Maintenance and Care
To ensure the longevity and appearance of your GOLDFAN dining table, follow these care instructions:
- Glass Top: Wipe stains with a damp cloth. For best results and streak-free shine, follow with a dry cloth or glass cleaner.
- Metal Legs: Wipe the metal components with a dry cloth to remove dust and fingerprints. Avoid abrasive cleaners that may scratch the finish.
- Spills: Clean spills immediately to prevent staining or damage.
- Heat Protection: Always use placemats or coasters under hot dishes and cold beverages to protect the glass surface.
- Avoid Harsh Chemicals: Do not use harsh chemicals or abrasive cleaning pads on any part of the table.
7. Troubleshooting
If you encounter any issues with your dining table, please refer to the following common solutions:
- Table Wobbles: Check all assembly screws and bolts. Re-tighten any loose connections. Ensure the table is on a level surface. Adjust the anti-slip feet if they are uneven.
- Scratches on Glass: Minor scratches can sometimes be minimized with specialized glass repair kits. For deeper scratches, professional repair or replacement may be necessary. Prevent scratches by using placemats and avoiding dragging objects across the surface.
- Difficulty Assembling: Review the assembly instructions carefully. Ensure all parts are correctly oriented. If a part seems stuck, do not force it; re-examine the diagram.
8. Specifications
| Brand | GOLDFAN |
| Model Number | AWS-022-SILVER |
| Dimensions (L x W x H) | 80 x 80 x 75 cm (31.5 x 31.5 x 29.5 inches) |
| Diameter | 80 cm (31.5 inches) |
| Weight | 16.72 kg (36.86 lbs) |
| Material (Tabletop) | 8mm Tempered Glass |
| Material (Legs) | Metal |
| Color | Transparent (Glass), Silver (Legs) |
| Shape | Round |
| Recommended Use | Dining, small gatherings, reading, tea |
9. Warranty and Support
Information regarding product warranty and customer support contact details is not provided within this manual. For warranty inquiries or further assistance, please refer to your purchase documentation or contact the retailer directly.
