1. Introduction
Thank you for choosing the Akia Screens AK-ELT120H Motorized Tab-Tension Projector Screen. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new projector screen. Please read this manual thoroughly before use and retain it for future reference.
Key Features:
- 120-inch Diagonal, 16:9 Aspect Ratio: Provides a large viewing area suitable for home theater and commercial applications.
- CineWhite P Material: 1.0 gain flexible front projection material with a 180-degree viewing angle, 4K/8K Ultra HD ready, and ISF Certified for accurate color reproduction. Features a black backing to eliminate light penetration.
- Tab-Tension System: Ensures a flat, ripple-free projection surface for optimal image quality.
- Motorized Operation: Features a silent, energy-efficient synchronized motor for smooth screen deployment and retraction.
- Versatile Control System: Includes Infrared (IR) remote, wall box controller with built-in IR sensor, and RJ50 Port for wired 12-volt trigger integration. User-friendly programmable vertical drop position.
- Installation Flexibility: Durable black casing with flush wall sliding brackets for easy wall or ceiling installation and horizontal centering.
- Projector Compatibility: Compatible with Ultra Short Throw (UST), Short Throw, and Standard Throw projectors.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in fire, electric shock, or other injury or damage.
- Read all instructions before operating the screen.
- Do not allow children to operate the screen without supervision.
- Ensure the screen is securely mounted according to the installation instructions to prevent it from falling.
- Do not obstruct the movement of the screen during operation. Keep hands and objects clear of the screen path.
- Disconnect power before performing any maintenance or cleaning.
- Do not expose the screen to moisture or extreme temperatures.
- Use only the provided power cord and accessories.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
3. Package Contents
Please verify that all components are present before proceeding with installation:
- Motorized Tab-Tension Projector Screen (AK-ELT120H)
- Infrared (IR) Remote Control
- Wall Box Controller
- Power Cable
- Installation Kit (mounting brackets, screws, anchors)
- RJ50 Cable (for 12-volt trigger feature)
Image: Main product image showing the motorized screen, two remote controls, and a cable, representing the typical package contents.
4. Setup and Installation
The AK-ELT120H screen is designed for wall or ceiling installation. It ships fully assembled and is plug-and-play ready. Professional installation is recommended.
4.1 Mounting Location Considerations
- Ensure the mounting surface (wall or ceiling) can support the screen's weight (approximately 28.7 pounds).
- Locate wood studs or use appropriate anchors for secure installation.
- Consider the projector's throw distance and offset to ensure the image aligns correctly with the screen.
- Ensure a power outlet is within reach of the screen's power cord.
4.2 Installation Steps
- Attach Mounting Brackets: Secure the flush wall sliding brackets to your chosen wall or ceiling location. These brackets allow for horizontal adjustment to center the screen.
Image: Detail of the mounting bracket attached to the screen casing, illustrating how it connects for installation.
- Mount the Screen: Carefully lift the screen and attach it to the installed brackets. Slide the screen horizontally as needed to achieve proper centering.
- Connect Power: Plug the screen's power cord into a standard electrical outlet.
- Optional 12-Volt Trigger Connection: If using a projector with a 12-volt trigger output, connect the RJ50 cable from the projector to the RJ50 port on the screen's wall box controller. This allows the screen to automatically deploy/retract with your projector's power cycle.
Image: The control system, showing the remote and the wall box controller, which includes the RJ50 port for the 12-volt trigger.
5. Operation
Your Akia Screens motorized projector screen can be operated using the included IR remote control or the wall box controller.
5.1 Using the IR Remote Control
- Point the IR remote control towards the screen's IR sensor (located on the wall box controller).
- Press the UP button to raise the screen.
- Press the DOWN button to lower the screen.
- Press the STOP button to pause the screen at any desired position.
5.2 Using the Wall Box Controller
- The wall box controller features an up/stop/down toggle switch for manual operation.
- Move the switch UP to raise the screen.
- Move the switch DOWN to lower the screen.
- Return the switch to the MIDDLE position to stop the screen.
5.3 Programmable Vertical Drop Position
The screen allows you to set a custom lower limit for the screen's drop position. Refer to the detailed instructions included with your screen for programming this feature. This is useful for optimizing the viewing area for your specific projector setup.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your projector screen.
- Screen Surface Cleaning: The CineWhite P material is easy to clean. Gently wipe the screen surface with a soft, damp cloth using mild soap and water. Avoid abrasive cleaners or harsh chemicals, as these can damage the screen material.
- Casing Cleaning: Wipe the screen casing with a soft, dry cloth to remove dust.
- Motor Inspection: Periodically check the motor for any unusual noises or signs of wear. If any issues arise, contact customer support.
- General Inspection: Regularly inspect the mounting hardware and cables to ensure they are secure and undamaged.
7. Troubleshooting
If you encounter issues with your Akia Screens projector screen, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Screen does not respond to remote/wall switch. | No power, remote batteries dead, IR sensor blocked, remote not paired. |
|
| Screen stops halfway or moves erratically. | Motor malfunction, obstruction, power fluctuation. |
|
| Wrinkles or ripples on the screen surface. | Initial setup, environmental factors. |
|
| 12-volt trigger not working. | Incorrect connection, projector setting. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | AK-ELT120H |
| Screen Type | Motorized Tab-Tension Projector Screen |
| Diagonal Size | 120 inches |
| Aspect Ratio | 16:9 |
| Viewing Area (H x W) | 58.8" H x 104.5" W |
| Overall Size (H x W) | 77.6" H x 121.6" W |
| Screen Material | CineWhite P (1.0 Gain, Flexible Front Projection) |
| Viewing Angle | 180 degrees |
| Resolution Support | 4K/8K Ultra HD Ready |
| Certifications | ISF Certified for Accurate Color Reproduction |
| Projector Compatibility | Ultra Short Throw, Short Throw, Standard Throw |
| Control Options | IR Remote, Wall Box Controller, 12-Volt Trigger (RJ50) |
| Casing Material | Metal |
| Item Weight | 28.7 pounds |
| Mounting Type | Wall or Ceiling Mount |
Image: Dimensional diagram of the AK-ELT120H screen, indicating 120-inch diagonal, 16:9 aspect ratio, 121.6" overall width, and 77.6" overall height.
Image: Visual representation of the CineWhite P material, highlighting its flexible matte white surface, 1.0 gain, 180-degree viewing angle, black backing, and ISF certification.
9. Warranty and Support
Akia Screens provides comprehensive support for its products.
- Manufacturer's Warranty: The product comes with a 2-Year/3-Year ENR-G Manufacturer's Warranty by Elite Screens (if purchased NEW). Elite Screens is an ISO9001 manufacturer since 2004.
- Technical Support: Lifetime Technical Support is available via email or phone call from Elite Screens' Professional Service Team.
For warranty claims, technical assistance, or further inquiries, please contact Akia Screens customer service or visit their official website.
Image: Graphic detailing Akia Screens' US-based support, 2-year warranty, and lifetime technical support via email and web chat.
