1. Introduction
Thank you for purchasing the SONICAKE Sonic Wood Multi-Effects Pedal. This versatile unit is designed to be a one-stop gig solution for acoustic instrument players, integrating essential effects like Preamp, Chorus, Delay, and Reverb. It also includes a set of footswitch toppers for enhanced usability. This manual provides detailed instructions on how to set up, operate, and maintain your pedal to ensure optimal performance and longevity.
2. Safety Information
- Power Supply: Use only the specified DC 9V power adapter. Using an incorrect power supply can damage the unit and void the warranty.
- Environment: Do not expose the pedal to extreme temperatures, humidity, water, or direct sunlight.
- Handling: Avoid dropping or subjecting the pedal to strong impacts.
- Cleaning: Clean only with a dry, soft cloth. Do not use liquid cleaners.
- Servicing: Do not attempt to service the unit yourself. Refer all servicing to qualified personnel.
3. Product Overview
The SONICAKE Sonic Wood pedal combines multiple essential effects into a compact and durable unit, perfect for acoustic guitarists.
3.1 Key Features
- One-Stop Gig Solution for Acoustic Instruments Players with Main Effects needed.
- Analog Preamp with 2-Band EQ recreates a Classic Acoustic Guitar Amplifier, providing a warm, natural sound.
- Integrated Chorus, Delay, and Reverb effects for versatile sound shaping.
- XLR Output for direct connection to mixing consoles or audio interfaces.
- Includes Footswitch toppers for improved comfort and visibility.
3.2 Controls and Connections
Figure 3.2.1: Top view of the SONICAKE Sonic Wood pedal showing all controls and inputs/outputs, along with the included footswitch toppers.
The pedal features dedicated controls for each effect section:
- Preamp Section: Controls for Volume, Bass, and Treble to shape your acoustic tone.
- Chorus Section: Controls for Level, Depth, and Rate to adjust the modulation effect.
- Delay Section: Controls for Blend, Repeat, and Time to dial in your delay.
- Reverb Section: Control for Mix to adjust the reverb level.
- Footswitches: Individual footswitches for activating/deactivating each effect. Some footswitches also support tap tempo or hold functions.
- Input (IN): 1/4" mono jack for connecting your instrument.
- Output (OUT): 1/4" mono jack for connecting to an amplifier or other pedals.
- XLR Output (XLR OUT): Balanced XLR output for direct connection to a PA system or mixing console.
- DC 9V: Power input jack for the DC 9V power adapter.
4. Setup
Follow these steps to set up your SONICAKE Sonic Wood pedal:
- Power Connection: Connect the DC 9V power adapter to the "DC 9V" input jack on the pedal and plug the adapter into a standard wall outlet.
Figure 4.1: The SONICAKE Sonic Wood pedal shown with its compatible DC 9V power supply connected.
- Instrument Connection: Connect your acoustic guitar or instrument to the "IN" jack using a standard 1/4" instrument cable.
- Output Connection:
- For an amplifier: Connect the "OUT" jack to your acoustic amplifier's input using a 1/4" instrument cable.
- For a PA system/mixer: Connect the "XLR OUT" to a balanced input on your PA system or mixing console using an XLR cable.
Figure 4.2: The SONICAKE Sonic Wood pedal set up with an acoustic guitar and connected to an amplifier, ready for use.
- Footswitch Toppers: Optionally, place the included footswitch toppers onto the footswitches for improved comfort and visibility, especially in low-light conditions.
Figure 4.3: A close-up view of one of the footswitch toppers installed on the pedal, highlighting its translucent design and potential for illumination.
Figure 4.4: A foot demonstrating the use of a footswitch topper on a multi-effects pedal, illustrating the added surface area and comfort.
5. Operation
Each effect section can be activated independently using its dedicated footswitch. Adjust the knobs to fine-tune your sound.
5.1 Preamp
The Preamp section provides a warm, natural acoustic amplifier tone. Use it to boost your signal and shape your instrument's fundamental sound.
- VOL: Adjusts the overall output volume of the preamp.
- BASS: Controls the low-frequency response.
- TREB: Controls the high-frequency response.
- Footswitch: Toggles the Preamp effect on/off.
5.2 Chorus
The Chorus effect adds a rich, swirling modulation to your sound, making it thicker and more spacious.
- LEVEL: Adjusts the mix of the wet (effected) signal with the dry signal.
- DEPTH: Controls the intensity of the chorus effect.
- RATE: Controls the speed of the chorus modulation.
- Footswitch: Toggles the Chorus effect on/off.
5.3 Delay
The Delay effect creates echoes of your sound, adding depth and rhythmic interest.
- BLEND: Adjusts the volume of the delayed signal.
- REPEAT: Controls the number of echoes.
- TIME: Controls the delay time between echoes.
- Footswitch: Toggles the Delay effect on/off. Hold the footswitch to activate Tap Tempo mode, allowing you to set the delay time by tapping the switch.
5.4 Reverb
The Reverb effect simulates the natural reflections of sound in a space, adding ambience and sustain.
- MIX: Adjusts the amount of reverb added to your signal.
- Footswitch: Toggles the Reverb effect on/off. Hold the footswitch for a momentary "trail" effect, allowing the reverb to naturally decay after the switch is released.
6. Maintenance
- Cleaning: Use a soft, dry cloth to wipe down the pedal. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the pedal in a cool, dry place away from direct sunlight and extreme temperatures.
- Transportation: For transport, it is recommended to use a padded gig bag or case to protect the pedal from physical damage.
Figure 6.1: The SONICAKE Sonic Wood pedal shown compactly stored within a gig bag, demonstrating its portability and ease of transport.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or weak sound. | Incorrect cable connections; Power supply issue; Effect bypassed. | Check all cable connections (input, output, XLR). Ensure power supply is correctly connected and functional. Verify that the desired effect is engaged (LED indicator should be on). Check instrument and amplifier volume. |
| Distorted or noisy sound. | Input signal too hot; Faulty cables; Power supply interference. | Reduce the input volume from your instrument. Try different cables. Ensure power supply is stable and not near other noisy electronics. |
| Effect not engaging. | Footswitch malfunction; Internal issue. | Press the footswitch firmly. If the LED does not light up, ensure the pedal is powered. If problem persists, contact support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | SONICAKE |
| Model | Sonic Wood |
| Audio Output Effects | Chorus, Delay, Reverb, Preamp |
| Signal Format | Analog |
| Power Source | Corded Electric (DC 9V) |
| Hardware Interface | 1/4" Input/Output, XLR Output |
| Color | Black |
| ASIN | B0CTMKHDYF |
9. Warranty and Support
SONICAKE products are designed for reliability and performance. For warranty information and technical support, please refer to the official SONICAKE website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.
For further assistance, you may visit the SONICAKE Store on Amazon.
