EGO POWER+ Electric Pressure Washer User Manual

Product Overview

The EGO POWER+ 3200 PSI Pressure Washer is designed for powerful and efficient cleaning tasks around your home. Utilizing Peak Power™ technology, it combines the energy from two EGO POWER+ 56V ARC Lithium™ batteries to deliver impressive pressure and flow. Its cordless design offers unparalleled convenience, eliminating the need for power outlets or gas. The unit features intuitive controls, quick-connect points for accessories, and a telescopic handle for easy portability and storage.

Image: EGO POWER+ 3200 PSI Electric Pressure Washer with included batteries.

Important Safety Instructions

WARNING: Never use an electric pressure washer in wet conditions or near water sources due to the risk of electric shock. Always ensure your work area is dry and clear of standing water.

• Read all instructions before using the appliance.
• Wear appropriate personal protective equipment, including eye protection.
• Ensure all connections are secure before operating.
• Do not direct the spray at people, pets, or electrical devices.
• Keep children and bystanders away from the operating area.

Setup Guide

1. Unpacking and Assembly

Carefully remove all components from the packaging. Ensure all parts listed in the 'Includes' section are present. Attach the wand mounts using a Phillips screwdriver. The telescopic handle can be extended for use and collapsed for storage.

Image: Included accessories such as hoses, gun, lance, foam cannon, and various nozzles.

2. Battery Installation

The EGO POWER+ Pressure Washer requires two 56V ARC Lithium™ batteries for operation. Ensure both batteries are fully charged before use. Open the battery compartment and firmly insert both batteries until they click into place. Close the compartment cover securely.

Image: Proper installation of 56V ARC Lithium batteries into the unit.

3. Connecting Hoses and Nozzles

Connect the flexible 25-foot high-pressure hose to the pressure washer's outlet and the quick-connect short pressure washer gun. Attach the desired nozzle (15°, 25°, 40°, turbo, or rinse) to the quick-connect wand lance. The quick-connection points allow for easy and secure attachment.

Image: Quick connection points for hoses and the wand for easy setup.

Operating Instructions

1. Water Source Connection

Connect the pressure washer to a standard garden hose. Alternatively, for portable use, the included siphon hose allows the unit to draw water from any fresh water source, such as a bucket or rain barrel.

2. Powering On and Mode Selection

Press the power button on the unit. Use the handheld pressure control on the wand to select between ECO, High, and Turbo modes. The display integrated into the wand will show the selected mode and battery charge status.

The pressure washer delivers up to 3200 PSI at 1.2 GPM, with a maximum flow rate of 2.0 GPM.

Image: Demonstrates the powerful output of 3200 PSI at 1.2 GPM.

3. Cleaning Operation

Direct the spray at the surface to be cleaned, maintaining a safe distance to avoid damage. Move the wand in a steady, sweeping motion. The unit provides up to 60 minutes of runtime on a single charge with the two included 6.0Ah ARC Lithium batteries, suitable for various cleaning tasks.

Image: Illustrates the extended runtime of 60 minutes for cleaning larger areas.

Maintenance

• After each use, flush the system with clean water to remove any detergent or debris.
• Clean the nozzles regularly to prevent clogging.
• Store the pressure washer in a dry, protected area, especially during freezing temperatures.
• Remove batteries when storing the unit for extended periods.
• Inspect hoses and connections for wear or damage before each use.

Troubleshooting

If the pressure washer does not operate as expected, check the following:

• No Power: Ensure batteries are fully charged and properly seated in the compartment.
• Low Pressure: Check water supply for adequate flow and pressure. Ensure hoses are not kinked and nozzles are clear of obstructions.
• Water Leaks: Verify all quick-connect points and hose connections are tight and sealed. Inspect O-rings for damage.
• Unit Shuts Off: This may indicate overheating or low battery charge. Allow the unit to cool down or recharge batteries.

For persistent issues, contact EGO Power+ customer support.

Technical Specifications

Warranty and Support

The EGO POWER+ Electric Pressure Washer comes with a comprehensive warranty:

• Tool Warranty: 5-year limited warranty.
• Battery Warranty: 3-year limited warranty.

For warranty claims, technical support, or replacement parts, please visit the official EGO Power+ website or contact their customer service department. Keep your proof of purchase for warranty validation.