1. Introduction
Thank you for choosing the Hishine Swing Stand Metal Frame. This heavy-duty, full steel A-frame is designed to provide a safe and durable foundation for your outdoor swings, accommodating up to two swings with a total weight capacity of 550 lbs. Its robust construction and thoughtful design ensure a fun and secure play environment for your family. This manual will guide you through the assembly, operation, maintenance, and troubleshooting of your new swing stand.
Figure 1.1: Hishine Swing Stand Metal Frame, designed for outdoor use.
2. Safety Information
Please read and understand all safety warnings and instructions before assembly and use. Failure to follow these instructions may result in serious injury.
- Maximum Weight Capacity: Do not exceed the total weight capacity of 550 lbs (approximately 250 kg) for the entire swing stand.
- Adult Supervision: Children should always be supervised by an adult while using the swing stand.
- Proper Installation: Ensure the swing stand is assembled correctly and securely anchored to the ground using the provided ground stakes. Consider concrete anchoring for permanent installation and enhanced stability.
- Clearance Area: Maintain a safe clearance area around the swing stand, free from obstacles, walls, or other structures.
- Regular Inspection: Periodically inspect all components, including bolts, nuts, hooks, and frame integrity, for wear, damage, or looseness. Tighten any loose connections immediately.
- Weather Conditions: Do not use the swing stand during strong winds, heavy rain, or other adverse weather conditions.
- Swing Compatibility: Ensure any swings attached are compatible with the stand's hanging hooks and do not exceed individual swing weight limits.
Figure 2.1: Dimensions and weight capacity of the Hishine Swing Stand. The stand is 70.28 inches (178.51 cm) high with a 77.95 inch (197.99 cm) top bar, and a base width of 97.64 inches (248.01 cm). It supports a total of 500 lbs, with individual swing capacities shown as 100 lbs and 400 lbs for different swing types.
3. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact Hishine customer support.
- Top Bar Sections (2)
- A-Frame Leg Sections (8)
- Cross Brace Tubes (4)
- Ground Stakes (4)
- U-shaped Hooks (4)
- Bolts, Washers, and Nuts (various sizes)
- Wrench and Allen Key (for assembly)
- Instruction Manual
4. Setup and Assembly
Assembly of the Hishine Swing Stand is designed to be straightforward. It is recommended to have two adults for easier and safer assembly. Please follow these steps carefully:
- Prepare the Area: Choose a flat, level outdoor surface for assembly and permanent placement. Ensure adequate clearance around the swing stand for safe use.
- Assemble the Top Bar: Connect the two top bar sections using the provided bolts and nuts. Ensure they are securely fastened.
- Attach A-Frame Legs: Connect the A-frame leg sections to the top bar. The triangular design of the A-frame provides scientific and stable support. Ensure all connections are firm.
- Install Cross Braces: Attach the cross brace tubes between the A-frame legs on each side. These provide additional stability and rigidity to the structure.
- Secure Ground Stakes: Once the frame is fully assembled, position it in its desired location. Drive the four metal ground stakes into the ground at a 45-degree angle through the designated holes at the base of each A-frame leg. For enhanced stability, especially on softer ground, consider anchoring the legs in concrete.
- Install Hanging Hooks: Attach the U-shaped hooks to the pre-drilled holes on the top bar. The stand provides four hanging hooks to accommodate various swing types.
- Final Check: Before attaching any swings, double-check all bolts and nuts to ensure they are tightly secured. Verify the stand is stable and does not wobble.
Figure 4.1: Illustration of the strong and stable A-frame structure, showing reinforced welded A-frame with 4 bolts fixed, fixed by steel tubes & cover, contacted & fixed by 2 tubes, and 4 metal stakes into the ground for stability.
Figure 4.2: Detail showing how to use stakes to secure the swing stand into grass or ground for solid construction.
Figure 4.3: Diagrams illustrating ground anchoring methods, including driving stakes at a 45-degree angle and optional concrete anchoring for increased stability.
5. Operating Instructions
The Hishine Swing Stand is designed for versatile use with various types of swings. Follow these guidelines for optimal operation:
- Attaching Swings: The stand features 4 hanging hooks, allowing you to attach up to two swings. Use the carabiner design for easy installation and removal of swing seats.
- Swing Compatibility: This stand is suitable for a wide range of swings, from small saucer swings to large porch swings. Ensure the swing's attachment mechanism is compatible with the provided hooks.
- Weight Distribution: When using two swings, ensure the weight is distributed evenly and does not exceed the total 550 lbs capacity.
- Safe Use: Always ensure users are within the recommended age and weight limits for the attached swings and the stand itself. Encourage safe swinging practices, avoiding excessive force or dangerous maneuvers.
Figure 5.1: Illustration of the three connection modes for swing accessories: Metal Hook, Lanyard, and Strap In The Middle, ensuring firm connection to the swing stand.
Figure 5.2: The Hishine Swing Stand is suitable for various types of swings and even yoga ropes, demonstrating its versatility for different outdoor activities.
6. Maintenance
Regular maintenance will extend the life of your Hishine Swing Stand and ensure continued safety.
- Cleaning: Clean the metal frame periodically with a damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
- Inspection: Conduct a thorough inspection of the swing stand at least once a month during periods of frequent use, and before and after seasonal storage. Check for:
- Loose bolts, nuts, or connections. Tighten as necessary.
- Signs of rust, especially on joints and exposed metal.
- Cracks, bends, or deformation in the steel tubes.
- Integrity of the ground stakes and anchoring.
- Rust Prevention: The frame is constructed from powder-coated steel for weather resistance. If scratches or chips occur, touch up with rust-inhibiting paint to prevent corrosion.
- Winter Storage: If not in use during winter months, consider disassembling and storing the swing stand in a dry, sheltered location to protect it from harsh weather conditions.
Figure 6.1: The swing stand is made from strong and durable material, featuring metal hooks, a strong and stable A-frame, and quality raw materials. All components are powder-coated for anti-rust, anti-corrosion, and anti-wear properties.
7. Troubleshooting
If you encounter issues with your Hishine Swing Stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand wobbles or is unstable. | Loose connections; uneven ground; insufficient anchoring. | Tighten all bolts and nuts. Relocate to a level surface. Ensure ground stakes are fully inserted and consider additional anchoring (e.g., concrete). |
| Parts do not fit together during assembly. | Misalignment; manufacturing defect (bent part); incorrect part usage. | Double-check the instruction manual for correct part orientation and sequence. Ensure no parts are bent or damaged. If a part is defective, contact customer support for replacement. |
| Screws/bolts do not thread properly. | Cross-threading; debris in threads; misaligned holes. | Ensure bolts are inserted straight. Clear any debris from threads. If holes are misaligned, gently adjust the frame or contact customer support. Do not force. |
| Rust appearing on the frame. | Damage to powder coating; prolonged exposure to moisture. | Clean the rusted area, sand lightly, and apply rust-inhibiting paint. Ensure proper drainage around the base. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Hishine |
| Model Number | HS-DU02 |
| Color | Black |
| Product Dimensions (L x W x H) | 78" x 52" x 70" (approx. 198cm x 132cm x 178cm) |
| Frame Material | Alloy Steel |
| Finish Type | Powder Coated |
| Maximum Weight Capacity | 550 lbs (249 kg) |
| Assembly Required | Yes |
| Item Weight | 36 pounds (16.3 kg) |
9. Warranty and Support
Hishine is committed to providing high-quality products and excellent customer service.
- Lifetime Replacement Parts: We offer lifetime replacement parts for your Hishine Swing Stand. All shipping fees for replacement parts are covered by Hishine.
- Returns and Refunds: A prepaid return label and full refund are guaranteed if you wish to return the product.
- Customer Support: For any questions, assistance with spare parts, or return labels, please contact Hishine customer service via Amazon for quick solutions. We are dedicated to resolving all product-related issues promptly.
