vidaXL Sonoma Oak Bed Frame with Storage Drawers (90x200 cm)

1. Introduction

This manual provides essential information for the assembly, operation, and maintenance of your vidaXL Sonoma Oak Bed Frame with Storage Drawers. This single bed frame is designed for a mattress size of 90 x 200 cm and features two integrated storage drawers. Constructed from durable engineered wood with plywood slats, it offers a stable and practical solution for your bedroom. Please read these instructions carefully before assembly and use.

Image 1.1: The vidaXL Sonoma Oak Bed Frame with Storage Drawers. This image shows the complete bed frame with its light wood finish and two integrated drawers at the front.

2. Safety Information

Please observe the following safety guidelines to ensure safe assembly and use of your bed frame:

• Always read the entire instruction manual before beginning assembly.
• Ensure all components are present and undamaged before assembly.
• Assembly should ideally be performed by two adults to prevent injury and ensure proper construction.
• Keep children and pets away from the assembly area to avoid accidents.
• Use only the tools specified in the assembly guide.
• Ensure all screws, bolts, and fasteners are securely tightened. Periodically check and re-tighten all connections to maintain stability.
• Do not overload the storage drawers.
• Do not stand or jump on the bed frame.
• Place the bed frame on a flat, stable surface.

3. Package Contents

Verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact vidaXL customer support.

• Bed frame components (headboard, footboard, side rails, support beams)
• Plywood slats
• Two (2) storage drawers
• Hardware pack (screws, bolts, dowels, etc.)
• Assembly manual

4. Setup and Assembly

Assembly of the vidaXL Sonoma Oak Bed Frame requires careful attention to detail. Please refer to the dedicated assembly manual included in your package for step-by-step instructions and diagrams.

1. Preparation: Clear a spacious area for assembly. Lay out all components and hardware. Ensure you have the necessary tools (e.g., screwdriver, hammer).
2. Frame Assembly: Follow the instructions in the included assembly manual to connect the headboard, footboard, and side rails. Ensure all connections are secure.
3. Slat Installation: Install the plywood slats onto the bed frame according to the manual's instructions. These slats provide essential mattress support.
4. Drawer Assembly: Assemble the two storage drawers as per the instructions. Install the drawer runners or wheels.
5. Drawer Integration: Insert the assembled drawers into their designated spaces beneath the bed frame.
6. Final Check: Once assembled, ensure the bed frame is stable and all fasteners are tight.

Image 4.1: The bed frame without a mattress, illustrating the plywood slats and the integrated storage drawers beneath.

Image 4.2: A close-up view of the bed frame's corner construction and the plywood slats, highlighting the material and support structure.

5. Operating Instructions

Using your bed frame is straightforward once assembled.

• Mattress Placement: Place a standard 90 x 200 cm mattress directly onto the plywood slats. Ensure the mattress is centered and fits securely within the frame.
• Storage Drawers: The two integrated drawers are designed for storing bedding, clothing, or other lightweight items. Pull them out gently to access contents and push them back in fully to keep them neatly tucked away.
• Weight Capacity: The bed frame is designed to support the weight of a standard 90x200 cm mattress and one adult. Avoid exceeding this capacity.

Image 5.1: The bed frame shown with a mattress and bedding, demonstrating its intended use as a sleeping surface.

6. Maintenance

Regular maintenance will help prolong the life and appearance of your bed frame.

• Cleaning: Wipe the bed frame surfaces with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner. Dry immediately with a clean cloth.
• Avoid: Do not use harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the engineered wood finish.
• Fastener Check: Periodically (e.g., every 3-6 months) check all screws, bolts, and connections. Re-tighten any loose fasteners to ensure the bed frame remains stable and secure.
• Drawer Care: Keep drawer tracks clean and free of debris to ensure smooth operation.

Image 6.1: A close-up view of the Sonoma Oak wood texture, illustrating the finish that requires gentle cleaning.

7. Troubleshooting

If you encounter any issues with your bed frame, refer to the following common solutions:

• Bed frame is wobbly:
  • Ensure all assembly screws and bolts are fully tightened.
  • Verify that the bed frame is placed on a level surface.
• Drawers do not slide smoothly:
  • Check if the drawers are assembled correctly and aligned with the runners.
  • Inspect the drawer tracks for any obstructions or debris and clean if necessary.
  • Ensure the drawers are not overloaded.
• Squeaking noises:
  • Re-tighten all fasteners on the bed frame and slats.
  • Ensure the mattress is properly seated on the slats.

8. Specifications

Key technical specifications for the vidaXL Sonoma Oak Bed Frame with Storage Drawers:

Image 8.1: A diagram illustrating the key dimensions of the bed frame, including length, width, height, and drawer dimensions.

9. Warranty and Support

For information regarding the product warranty, please refer to the documentation provided at the time of purchase or contact your retailer.

Should you require technical assistance, have questions about assembly, or need to report missing/damaged parts, please contact vidaXL customer support. You can typically find contact information on the vidaXL website or through your purchase platform.

Online Support: Visit the official vidaXL website for FAQs, support articles, and contact options.