HyperGear HyperBeam LED Wireless Speaker (Model 15925) User Manual

Introduction

The HyperGear HyperBeam LED Wireless Speaker (Model 15925) delivers powerful 20W HD stereo sound with dynamic bass and multi-color LED lighting. Designed for versatile audio experiences, it can be used for movies, gaming, and music playback. This manual provides detailed instructions to help you maximize your speaker's performance and features.

Image: The HyperGear HyperBeam LED Wireless Speaker showcasing its multi-color LED lighting.

What's in the Box

Verify that all items are present in the package:

• HyperGear HyperBeam LED Wireless Speaker
• 6ft USB-C Charging Cable
• 3.5mm Aux Cable

Product Features

• Powerful 20W HD Sound with Dynamic Bass
• Dual 52mm Full-Range Drivers
• 6-Mode Multicolor LED Lighting
• Built-in Microphone for Hands-Free Calls
• On-board and Wireless Controls
• Low-Profile Soundbar Design
• Anti-Noise Metal Mesh
• Anti-Slip Silicone Feet
• Multiple Playback Options: Bluetooth Wireless, Aux-In, USB Drive, microSD Card
• True Wireless Stereo (TWS) Pairing for room-filling sound
• Built-in Rechargeable Battery

Image: Key physical features and design elements of the HyperBeam speaker.

Setup

1. Charging the Speaker

1. Connect the provided USB-C charging cable to the speaker's charging port.
2. Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a computer's USB port.
3. The LED indicator will show charging status. A full charge typically takes approximately 3-4 hours.
4. Once fully charged, disconnect the charging cable.

2. Powering On/Off

• To power on, press and hold the Power button until the LED lights illuminate and you hear an audible prompt.
• To power off, press and hold the Power button again until the LED lights turn off.

Operating Instructions

1. Bluetooth Pairing

1. Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing LED light).
2. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
3. Select "HyperBeam" from the list of devices.
4. Once paired, the speaker will indicate a successful connection, and the LED light will change to a steady state.
5. The speaker will automatically attempt to reconnect to the last paired device when powered on.

2. Aux-In Mode

1. Connect one end of the provided 3.5mm Aux Cable to the speaker's Aux-In port.
2. Connect the other end to the headphone jack of your audio device.
3. The speaker will automatically switch to Aux-In mode.
4. Adjust volume from both your device and the speaker.

3. USB Drive Playback

1. Insert a USB flash drive containing audio files into the speaker's USB port.
2. The speaker will automatically detect the USB drive and begin playback.
3. Use the speaker's on-board controls to navigate tracks and adjust volume.

4. microSD Card Playback

1. Insert a microSD card containing audio files into the speaker's microSD card slot.
2. The speaker will automatically detect the card and begin playback.
3. Use the speaker's on-board controls to navigate tracks and adjust volume.

Image: The rear panel of the HyperBeam speaker illustrating its various connectivity options.

5. LED Lighting Modes

The speaker features 6 distinct multi-color LED lighting modes. Press the LED button (refer to product diagram for exact location) to cycle through the available modes or to turn the lights off.

Image: Visual representation of the speaker's customizable LED lighting with 8 colors and 6 modes.

6. Hands-Free Calling

When connected via Bluetooth to a smartphone, the built-in microphone allows for hands-free calls.

• Answer Call: Press the Play/Pause button once.
• End Call: Press the Play/Pause button once during a call.
• Reject Call: Press and hold the Play/Pause button.

7. True Wireless Stereo (TWS) Pairing

To achieve room-filling stereo sound, you can pair two HyperBeam LED Wireless Speakers together.

1. Ensure both HyperBeam speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), press and hold the TWS pairing button (refer to product diagram for exact location) until you hear a prompt indicating TWS pairing mode.
3. The primary speaker will search for the secondary speaker.
4. Once connected, both speakers will indicate a successful TWS connection.
5. Now, connect your device via Bluetooth to the primary speaker as described in the "Bluetooth Pairing" section. Audio will play in stereo through both speakers.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Water Resistance: This product is NOT waterproof. Avoid exposure to water or excessive moisture.
• Battery Care: To prolong battery life, fully charge the speaker before first use and at least once every three months if not used regularly.

Troubleshooting

Specifications

Warranty Information

This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included with your product or visit the official HyperGear website.

Keep your purchase receipt as proof of purchase for any warranty claims.

Support

For further assistance, technical support, or customer service inquiries, please contact HyperGear customer support through their official website:

HyperGear Official Website: www.hypergear.com

You may also find FAQs and additional resources on their support page.