1. Introduction and Overview
The Amewi BRX24 is a highly detailed 1:24 scale RC crawler designed for enthusiasts. It features a full metal body, contributing to increased weight for superior traction and durability. This Ready-To-Run (RTR) model includes a comprehensive LED lighting system with headlights, taillights, turn signals, and reverse lights. Powered by a robust 4WD brushed motor with full metal telescopic drive shafts and locked differentials, it ensures maximum propulsion across various terrains. The entire model is splash-proof, making it suitable for outdoor adventures.
For enhanced realism, the BRX24 boasts functional doors, a tailgate (which also serves as the battery compartment access), and a hood that opens to reveal a dummy engine. The interior is meticulously detailed with seats, a steering wheel, and a gear lever. A pre-mounted roof rack provides space for additional scale accessories.
Figure 1: Amewi BRX24 Metal Scale RC Crawler, front-side view.
2. Safety Instructions
WARNING: Not suitable for children under 3 years. Contains small parts that could be swallowed. Choking hazard.
- Always operate the RC crawler in open, safe areas, away from people, pets, and obstacles.
- Avoid operating near public roads, water bodies, or electrical lines.
- Adult supervision is recommended for children operating the vehicle.
- Do not touch moving parts during operation to prevent injury.
- Ensure all batteries are correctly installed with proper polarity.
- Use only the provided charging cable and battery. Do not attempt to charge damaged batteries.
- Disconnect the battery from the vehicle when not in use or during storage.
- Keep the product and its components away from extreme temperatures and moisture.
3. Package Contents
Please check the package contents carefully upon unboxing:
- 1x Amewi BRX24 RC Crawler Model (Anthracite)
- 1x 2.4 GHz Remote Control
- 1x LiPo Battery (2S, 7.4V, 300mAh)
- 1x USB Charging Cable
- 1x Instruction Manual (DE/EN)
Required for Operation (Not Included):
- 2x AA Mignon 1.5V batteries for the remote control
Figure 2: All items included in the Amewi BRX24 package.
4. Setup
4.1. Battery Installation (Vehicle)
- Open the tailgate of the BRX24 model. This provides access to the battery compartment.
- Carefully connect the provided LiPo battery to the vehicle's JST connector. Ensure the polarity is correct.
- Place the battery securely within the compartment.
- Close the tailgate.
4.2. Battery Installation (Remote Control)
- Locate the battery compartment on the underside of the remote control.
- Open the battery compartment cover.
- Insert 2x AA Mignon 1.5V batteries, ensuring they match the polarity markings inside the compartment.
- Close the battery compartment cover securely.
Figure 3: The 2.4 GHz remote control for the BRX24.
4.3. Charging the Vehicle Battery
- Disconnect the LiPo battery from the vehicle.
- Connect the LiPo battery to the provided USB charging cable.
- Plug the USB charging cable into a suitable USB power source (e.g., computer USB port, USB wall adapter).
- The charging indicator on the USB cable will show the charging status (refer to the charger's specific instructions for LED indications).
- Charging time is approximately 45 minutes for a full charge.
- Important: Do not leave the battery unattended during charging. Disconnect the charger once charging is complete.
5. Operating Instructions
5.1. Pairing the Remote Control and Vehicle
- Ensure fresh batteries are installed in both the remote control and the vehicle.
- Turn on the remote control first.
- Then, turn on the vehicle.
- The remote control and vehicle should automatically pair. If pairing fails, turn both off and repeat the process. Refer to the detailed manual for specific binding procedures if issues persist.
5.2. Driving Controls
- Steering Wheel: Located on the side of the remote control. Rotate it left or right for proportional steering control of the vehicle.
- Throttle Trigger: Located on the front of the remote control. Pull the trigger towards you to move forward. Push it away from you to brake or reverse. The throttle is proportional, allowing for precise speed control.
The 2.4 GHz remote control system provides an anti-interference band, ensuring reliable operation with a range of approximately 80 meters.
5.3. Special Features
- LED Lighting System: The BRX24 is equipped with a full LED lighting system, including functional headlights, taillights, turn signals, and reverse lights, enhancing realism during operation.
- Mountain Break (Crawler Mode): This feature, switchable on the transmitter, prevents the vehicle from rolling backward when ascending or descending steep inclines, providing greater control during crawling.
Figure 4: Detailed interior and engine bay of the BRX24.
6. Maintenance
- Cleaning: After each use, especially outdoors, clean the vehicle to remove dirt, dust, and debris from the chassis, wheels, and drivetrain. Use a soft brush or cloth. Avoid using water directly on electronic components.
- Inspection: Regularly inspect the vehicle for any loose screws, damaged parts, or worn tires. Tighten screws as needed and replace damaged components promptly.
- Battery Care: Always disconnect the LiPo battery from the vehicle when not in use. Store the battery in a cool, dry place. Do not overcharge or completely discharge the battery.
- Storage: Store the RC crawler and remote control in a dry, cool environment, away from direct sunlight and extreme temperatures.
7. Troubleshooting
- Vehicle Not Responding:
- Check if both the vehicle and remote control are switched ON.
- Verify that the batteries in both the vehicle and remote control are fully charged and correctly installed.
- Ensure the remote control and vehicle are properly paired.
- Short Run Time:
- Ensure the vehicle's LiPo battery is fully charged before use.
- Battery performance can decrease over time with repeated charge cycles.
- Poor Traction or Tipping:
- Ensure tires are clean and free of debris.
- While the metal body adds weight for traction, extreme obstacles or uneven weight distribution can affect stability. Consider adjusting driving style for challenging terrains.
- Interference During Operation:
- Operate the vehicle away from other 2.4 GHz devices or strong electromagnetic sources.
8. Specifications
| Feature | Specification |
|---|---|
| Scale | 1:24 |
| Length | 210 mm |
| Width | 85 mm |
| Height | 105 mm |
| Weight (Ready-to-Run) | 620 g (with battery) |
| Wheelbase | 125 mm |
| Track Width (Front/Rear) | 75 mm |
| Ground Clearance | Approx. 20 mm |
| Wheel Diameter (Outer/Width) | 36/14 mm |
| Rim Diameter | 28 mm |
| Transmission | Multi-layered, encapsulated |
| Shock Absorbers (Front/Rear) | 28 mm |
| Brake | Electronic / Mountain Break |
| Motor | Brushed, size 180 |
| Drive System | Metal telescopic drive shafts |
| Steering Servo | Mini |
| Main Material | Metal |
| Battery Compartment Dimensions | 40 x 25 x 25 mm |
| Vehicle Battery | LiPo, 2S, 7.4V, 300mAh, 20C, soft case, XH plug, 36 x 19 x 14 mm, 17 g |
| Run Time | Approx. 15 min |
| Max Speed | Approx. 8 km/h |
| Remote Control | 2.4 GHz, 3 channels |
| Range | Approx. 80 m |
| Charger | USB charging cable 7.4V 500mA |
| Charging Time | Approx. 45 min |
| Manufacturer Reference | 22662 |
| Recommended Age | 8 years and up |
9. Warranty Information
For detailed warranty information regarding your Amewi BRX24 RC Crawler, please refer to the official Amewi website or the retailer from whom you purchased the product. It is recommended to retain your proof of purchase (receipt or invoice) as it may be required for any warranty claims.
10. Support Information
Should you encounter any issues, require technical assistance, or have questions about your Amewi BRX24 RC Crawler, please contact Amewi customer service. Contact details, including phone numbers and email addresses, can typically be found on the official Amewi website (www.amewi.com) or within the product documentation included in your package.
