EUGAD Set of 2 Bedside Tables with 3 Drawers

Introduction

Thank you for choosing the EUGAD Set of 2 Bedside Tables. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: An assembled EUGAD bedside table with three drawers, showcasing its modern design and white finish with golden legs.

Safety Information

• Always assemble the product on a clean, flat, and soft surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the maximum load capacity of 25 kg (55 lbs) for the tabletop.
• To prevent tipping, always attach the anti-tip strap to a wall stud using appropriate hardware. This is especially important in homes with children or pets.
• Keep small parts out of reach of children during assembly to avoid choking hazards.
• Do not stand or climb on the bedside table.

Image: A close-up of the anti-tip strap attached to the back of the bedside table, with an illustration showing how to secure it to a wall to prevent tipping.

Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 2 x Bedside Tables (unassembled components)
• 2 x Mounting Accessories Kits (screws, dowels, anti-tip straps, etc.)
• 2 x Assembly Instructions (this document)

Setup and Assembly

Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a soft, clean surface. Refer to the included parts list (if separate) to identify each piece.
2. Assemble the Main Frame: Connect the side panels, back panel, and top panel using the provided screws and dowels. Ensure all connections are snug but do not overtighten.
3. Attach Drawer Rails: Install the metal drawer rails to the inner sides of the bedside table frame. Important: Pay close attention to the orientation of the drawer rails. The side of the rail with the larger distance to the top edge must face upwards to ensure the drawer closes completely. Incorrect orientation will prevent the drawers from closing properly.
4. Assemble Drawers: Assemble the three drawers for each bedside table. Attach the drawer fronts (with 3D effect) to the drawer boxes. Install the corresponding drawer rails to the sides of the drawer boxes.
5. Insert Drawers: Carefully slide the assembled drawers into the installed rails on the bedside table frame. Test each drawer for smooth operation.
6. Attach Legs: Secure the four golden metal legs to the bottom of the bedside table using the provided screws. Ensure they are firmly attached.
7. Adjust Feet: The legs feature adjustable foot glides. Adjust these glides to ensure the bedside table is stable and level on uneven floors, and to protect your floor from scratches.
8. Install Anti-Tip Strap: Attach the anti-tip strap to the back of the bedside table and then secure it to a wall stud. This step is critical for safety.

Image: An assembled EUGAD bedside table with all three drawers pulled open, revealing the internal storage space and the smooth metal drawer runners.

Image: A detailed view of the golden metal legs with adjustable feet, demonstrating how they provide stability and floor protection for the bedside table.

Operating Instructions

• Drawer Use: Gently pull the drawers open and push them closed. The metal rails are designed for smooth operation. Avoid forcing drawers.
• Storage: Utilize the three drawers for organized storage of personal items. The spacious tabletop can hold frequently used items like lamps, alarm clocks, or books.
• Weight Capacity: The tabletop has a maximum load capacity of 25 kg (55 lbs). Distribute weight evenly.

Image: An overhead view of the EUGAD bedside table with its drawers partially open, illustrating the ample storage space and smooth drawer runners.

Maintenance and Care

• Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the melamine veneer.
• Spills: The melamine veneer is water-resistant. Wipe up spills immediately to prevent staining or damage.
• Scratch Resistance: The panels are designed to be scratch-resistant, but avoid dragging sharp or heavy objects across the surface.
• Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Environmental Conditions: Avoid placing the bedside table in direct sunlight or near heat sources to prevent material degradation.

Image: A visual representation of the bedside table's high-quality panel, demonstrating its scratch-resistant, water-repellent, and easy-to-clean properties.

Troubleshooting

Problem: Drawers do not close completely or smoothly.

Solution: Check the installation of the drawer rails. Ensure the rails on both the drawer and the frame are correctly aligned and that the side of the rail with the larger distance to the top edge is facing upwards. Disassemble and reassemble the rails if necessary.

Problem: Bedside table is wobbly.

Solution: Ensure all assembly screws are tightened. Adjust the foot glides on the bottom of the legs to level the table on uneven surfaces. Confirm the anti-tip strap is securely installed.

Problem: Scratches or minor damage on the surface.

Solution: For minor scratches, a furniture repair pen or wax stick matching the color may be used. For deeper damage, contact customer support for advice.

Specifications

Image: A technical drawing illustrating the precise dimensions of the EUGAD bedside table and its individual drawers in both centimeters and inches.

Warranty and Support

For any questions, missing parts, or issues not covered in this manual, please contact EUGAD customer support. Please have your model number (0004CTG-2) and purchase information ready when contacting support.

Contact information for EUGAD customer support can typically be found on the retailer's website where the product was purchased or on the official EUGAD brand website.