VEVOR 279827 Dryer Motor Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your VEVOR 279827 Dryer Motor. This motor is designed as a replacement part for various dryer models, including those from Kenmore, Whirlpool, KitchenAid, and Roper. Please read these instructions thoroughly before proceeding with any installation or repair.

Image 1.1: VEVOR 279827 Dryer Motor, highlighting its powerful 1/3HP, 1690RPM, and low noise operation.

The VEVOR 279827 dryer motor delivers strong and powerful performance with 1/3HP horsepower, running at 1690RPM high speed while maintaining low noise levels. It is designed to revive your dryer and improve drying efficiency.

2. Safety Information

Always prioritize safety when working with electrical appliances. Failure to follow these safety guidelines may result in electric shock, injury, or damage to property.

• Disconnect Power: Before attempting any installation, repair, or maintenance, always ensure the dryer's power supply is completely disconnected from the electrical outlet.
• Wear Protective Gear: Wear appropriate personal protective equipment, including gloves, to protect your hands from sharp edges and potential electrical hazards.
• Qualified Personnel: If you are unsure about any step of the installation or repair process, consult a qualified appliance technician.
• Inspect Components: Before installation, inspect the new motor and all surrounding dryer components for any damage. Do not install damaged parts.
• Proper Tools: Use only the correct tools for the job to prevent damage to the motor or dryer.

3. Product Features

The VEVOR 279827 Dryer Motor is engineered with the following key features:

• Excellent Performance: Delivers 1/3 horsepower at 1690 RPM for efficient drying.
• Safety and Durability: Constructed from durable premium aluminum materials, featuring corrosion and rust resistance, thermal protection, and rigorous testing for long-lasting performance.
• Low Noise Operation: Designed to operate quietly, ensuring a peaceful home environment.
• Wide Compatibility: Replaces numerous part numbers for various dryer brands.

Image 3.1: The VEVOR 279827 Dryer Motor emphasizing its solid structure, corrosion resistance, rigorous testing, and overload protection.

4. Compatibility

The 279827 dryer motor is compatible with a range of dryer models from brands such as Kenmore, Whirlpool, KitchenAid, and Roper. To ensure a perfect match for your specific dryer model, it is recommended to verify compatibility.

Determining Compatible Models:

1. Visit the PartSelect website.
2. Enter the motor model number "279827" into the search field.
3. Review the list of compatible dryer models provided.

Image 4.1: Guide for using the PartSelect website to find compatible dryer models for the 279827 motor.

Replaces Part Numbers:

This motor replaces the following part numbers:

AP3094245, 2584, 279827, 2019, 26000299992, 26000695925, 279827, 299992, 336351, 337099, 337100, 337351, 3388209, 3388234, 3388235, 3390033, 339088, 3391886, 3391887, 3391888, 3392857, 3395652, 3395653, 339627, 339635, 339672, 3398046, 340907, 343029, 343234, 345437, 346744, 348804, 349587, 349588, 349808, 349954, 3976707, 3980069, 4319349, 660199, 660617, 661654, 687499, 687988, 689788, 690094, 690870, 691227, 694051, 695074, 695075, 695089, 695925, 697075, 786067, 786090, 8066206, 8066207, 8115, 8528319, 8538262, 8539555, W10366770, W10396029, W10396032, W10448892.

5. Installation Instructions

Replacing a dryer motor requires careful attention to detail. Follow these steps for a straightforward installation. Always ensure the dryer is unplugged before starting.

General Steps:

1. Prepare for Installation: Disconnect the dryer from its power source. Move the dryer to an open area to allow access to its internal components.
2. Access the Motor: Depending on your dryer model, you may need to remove the front panel, top panel, or rear panel to access the motor compartment. Refer to your dryer's specific service manual for detailed disassembly instructions.
3. Disconnect Old Motor: Carefully disconnect all wiring and belts from the old motor. Note the position of all connections, taking photos if necessary, to ensure correct reassembly.
4. Remove Old Motor: Unmount and remove the faulty motor from its housing.
5. Install New Motor: Position the VEVOR 279827 motor in the dryer's motor housing.
6. Connect Wiring and Belt: Reconnect all electrical wiring and the drive belt to the new motor according to your notes or photos. Ensure all connections are secure.
7. Reassemble Dryer: Reattach all panels and components that were removed during disassembly.
8. Test Operation: Plug the dryer back into the power source and test its operation to ensure the drum rotates correctly and there are no unusual noises.

Image 5.1: Motor shaft size and overall dimensions are crucial for a perfect fit. Ensure these measurements align with your dryer's requirements.

Important Installation Notes:

• Rubber Mounting Rings: The motor uses rubber rings (or

  Related Documents - 279827

  	VEVOR Single Phase Induction Motor DP120256SL - User Manual and Technical Information Detailed user manual and technical specifications for the VEVOR DP120256SL Single Phase Induction Motor, including safety warnings, connection methods, and troubleshooting guide.
  	General Purpose Motor U140256C Technical Specifications and Connection Guide Detailed technical information and connection instructions for the VEVOR General Purpose Motor, Model U140256C. Includes specifications like frame size, horsepower, voltage, RPM, and wiring diagrams for 115V and 230V connections.
  	VEVOR Hand Dryer K2017 User Manual and Technical Specifications This document provides the user manual, installation instructions, technical parameters, features, maintenance, and warranty terms for the VEVOR Hand Dryer Model K2017. It includes safety warnings and disposal information.
  	VEVOR OMS150S Electric Trolling Motor Remote Control Instructions Comprehensive instructions for the VEVOR OMS150S electric trolling motor remote control, covering operation modes, pairing, status indicators, troubleshooting, and safety information.
  	General Purpose Motor U141556C Technical Specifications and Connection Guide Detailed technical specifications and connection guide for the Vevor General Purpose Motor, Model U141556C. Features include 1.5HP, 115V/230V operation, 1750 RPM, and clear wiring instructions.
  	VEVOR 6666 Hand Dryer User Manual and Installation Guide Comprehensive user manual and installation guide for the VEVOR 6666 Hand Dryer, covering safety, specifications, installation, usage, and maintenance. Includes detailed instructions and product information.