Introduction
This manual provides essential information for the safe and efficient use of your Mifaso 8-Outlet Surge Protector with 3-Outlet Power Strip and USB charging ports. Please read these instructions carefully before use and retain them for future reference.
Product Features
- 12-in-1 Power Solution: Features 8 AC outlets, 1 USB-C port, and 3 USB-A ports.
- Surge Protection: Protects connected devices from power surges.
- USB Charging: USB-C port provides up to 5V/3A Max, and USB-A ports provide up to 5V/2.4A Max.
- Space-Saving Design: Compact form factor with a 5ft braided extension cord and a right-angle flat plug.
- Wall Mountable: Equipped with keyhole slots for flexible mounting options.
- Safety Features: Built-in over-current, over-charge, short-circuit, and over-heated protection.
Image 1: Overview of the Mifaso 8-Outlet Surge Protector and 3-Outlet Power Strip. This image displays the compact design and multiple outlets, including AC and USB ports.
Safety Instructions
To ensure safe operation and prevent damage, please observe the following:
- Do not exceed the maximum power rating of the surge protector.
- Do not use in wet environments or near water.
- Do not disassemble or modify the device.
- Keep out of reach of children.
- Ensure the plug is fully inserted into the wall outlet.
- Avoid running the cord under carpets or in high-traffic areas where it could be damaged.
Setup
- Unpack the Device: Carefully remove the surge protector from its packaging.
- Choose a Location: Select a dry, indoor location away from heat sources and direct sunlight.
- Plug into Wall Outlet: Insert the surge protector's flat plug into a standard 125V AC wall outlet. The right-angle design allows for placement behind furniture.
Image 2: Illustration of the right-angle flat plug, demonstrating its space-saving design when plugged into a wall outlet.
- Mounting (Optional): If desired, use the two keyhole slots on the back of the unit to mount it to a wall or desk. Ensure appropriate screws (not included) are used and securely fastened.
Image 3: The power strip shown mounted to a wall using its keyhole slots, illustrating its versatility.
Operating Instructions
Once the surge protector is plugged into a wall outlet, it is ready for use.
- Connecting AC Devices: Plug your electronic devices into any of the 8 AC outlets. Ensure the devices' power requirements do not exceed the surge protector's maximum rating.
- Connecting USB Devices: Connect your USB-C compatible devices to the USB-C port and other USB-A devices to the 3 USB-A ports using appropriate charging cables.
Image 4: Close-up view of the USB-C and USB-A ports, showing their respective maximum output specifications (5V/3A for USB-C, 5V/2.4A for USB-A).
- Surge Protection Indicator: A green "SURGE PROTECTED" indicator light will illuminate when the surge protection is active. If this light is off, the surge protection has been compromised, and the unit should be replaced.
Maintenance
- Cleaning: Disconnect the surge protector from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the power cord and the unit for any signs of damage, such as frayed wires or cracks. If damage is found, discontinue use and replace the unit.
- Surge Protection Check: Regularly check the "SURGE PROTECTED" indicator light. If it is off, the surge protection is no longer active, and the unit should be replaced to ensure continued protection for your devices.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. | Surge protector not plugged in; wall outlet not active; surge protection compromised. | Ensure the surge protector is securely plugged into a live wall outlet. Check the wall outlet with another device. If the "SURGE PROTECTED" light is off, replace the unit. |
| USB ports not charging. | Device not compatible; faulty USB cable; device requires more power than available. | Ensure your device is compatible with USB charging. Try a different USB cable. Verify the device's power requirements are within the USB port's specifications (USB-C 5V/3A, USB-A 5V/2.4A). |
| "SURGE PROTECTED" light is off. | Surge protection has been activated and absorbed a surge. | The surge protection component is no longer active. The unit will still function as a power strip, but without surge protection. For continued protection, replace the unit. |
Specifications
- Model: B0CTCCGZPQ
- AC Outlets: 8
- USB-C Ports: 1 (5V/3A Max)
- USB-A Ports: 3 (5V/2.4A Max per port, 15W Total Max)
- Voltage: 125V
- Cord Length: 5 ft (braided)
- Plug Type: Right-angle flat plug
- Special Features: Surge Protection, Wall Mountable, Anti-skid Pad
- Dimensions: Approximately 10.6 cm (4.2") L x 8.5 cm (3.4") W x 2.8 cm (1.3") H
Image 5: Diagram illustrating the compact dimensions of the Mifaso power strip.
Warranty and Support
For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service. The product is sold by MIFASOPOWER and fulfilled by Amazon.
Manufacturer's Store: Mifaso Store on Amazon