LEKATO WS50

Download PDF
Contents

LEKATO WS50 Guitar Wireless System & Looper Pedal Instruction Manual

Model: WS50

Introduction

This manual provides comprehensive instructions for the LEKATO WS50 Guitar Wireless System and Looper Pedal. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. The system combines a 24-bit/48KHz wireless audio transmission with a versatile looper pedal featuring 9 loops and up to 40 minutes of recording time.

Key Features

  • Clear Signal Transmission: 24-bit 48KHz high-quality audio broadcasting with less than 6ms latency and an effective range of approximately 100 meters.
  • Rechargeable Wireless System: Built-in rechargeable lithium battery provides up to 5 hours of working time. Includes a dual USB cable for convenient recharging.
  • Widespread Use: 220° rotatable plug design compatible with most electric guitars, bass, electric-acoustic guitars, and other musical instruments with a 1/4" pickup jack.
  • Long Memory Looper: Features 9 loops, with a single loop recording duration of up to 10 minutes, and a total recording time of 40 minutes. Includes a visual time indicator.
  • Uncompressed Audio: 48K/24bit sampling rate for lossless, uncompressed, professional tone quality. Analog-Dry-Through design ensures pure music enjoyment.

Package Contents

The LEKATO WS50 package includes the following items:

  • 1 x Guitar Effect Pedal (Looper)
  • 1 x USB Cable (Dual Micro-USB for charging transmitter and receiver simultaneously)
  • 1 x User Manual
  • 1 x Wireless Transmitter
  • 1 x Wireless Receiver
LEKATO WS50 Package List

Image: Contents of the LEKATO WS50 package, including the looper pedal, USB cable, user manual, and the wireless transmitter and receiver units.

Setup Guide

1. Charging the Devices

Before initial use, ensure both the wireless transmitter and receiver are fully charged. Use the provided dual USB cable. The charging ports are Micro-USB. A power adapter is not included; use a standard 5V USB power adapter.

LEKATO WS50 USB Charging Cable

Image: The dual USB charging cable for the wireless units. Note that a power adapter is not included.

2. Connecting the Wireless System

The wireless system consists of a transmitter and a receiver.

  • Transmitter: Plug the transmitter unit into the 1/4" output jack of your guitar. The 220° rotatable plug allows for flexible positioning to fit various guitar body shapes.
  • Receiver: Plug the receiver unit into the input of your amplifier, pedalboard, or audio interface.

LEKATO WS50 Wireless System connected to guitar

Image: The LEKATO wireless transmitter plugged into an electric guitar's output jack, demonstrating its compact and adjustable design.

3. Pairing the Transmitter and Receiver

Both the transmitter and receiver will automatically pair when powered on.

  • Power on both the transmitter and receiver units.
  • The indicator lights on both units will flash while searching for a connection.
  • Once successfully paired, the indicator lights will turn solid, indicating a stable connection.

LEKATO WS50 Wireless System pairing

Image: Close-up of the LEKATO wireless transmitter and receiver units, showing their indicator lights during the pairing process. The system supports simultaneous broadcasts on 4 channels.

Operating Instructions

1. Looper Pedal Basic Functions

The looper pedal is controlled primarily by a single footswitch and a level knob.

  • Record: Single press the footswitch to start recording.
  • Play/Overdub: Single press again to play the loop or to start overdubbing.
  • Stop: Double-tap the footswitch to stop playback.
  • Undo/Redo: Press and hold the footswitch for a short period (e.g., 1-2 seconds) to undo the last overdub. Repeat to redo.
  • Erase: Press and hold the footswitch for a longer period (e.g., 3+ seconds) to erase the current loop.
  • Level Knob: Adjusts the playback volume of the recorded loop.
LEKATO WS50 Looper Pedal in use

Image: The LEKATO WS50 looper pedal with a foot pressing the footswitch, illustrating its easy-to-use, one-key functionality for record, undo/redo, stop, and erase operations.

2. Tuner Function

The looper pedal includes a hidden tuning function for convenience.

  • To activate the tuner, press the two small buttons located near the "TUNER" label on the pedal simultaneously.
  • The display will show tuning indicators. Adjust your guitar's tuning until the central indicator lights up, signifying accurate pitch.
  • Press the footswitch to exit tuner mode and return to looper operation.
LEKATO WS50 Looper Pedal Tuner Function

Image: Close-up of the LEKATO WS50 looper pedal highlighting the "TUNER" section and the two buttons used to activate the hidden tuning function.

3. Channel Selection (Wireless System)

The wireless system supports 4 channels to avoid interference.

  • To change the channel, briefly press the channel button on both the transmitter and receiver units.
  • Ensure both units are set to the same channel for proper operation. The indicator lights will show the selected channel.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the devices. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: For optimal battery life, avoid fully discharging the units frequently. Recharge them regularly, especially if not used for extended periods.

Troubleshooting

ProblemPossible CauseSolution
No sound outputUnits not powered on, not paired, or low battery.Ensure both units are powered on and paired. Check battery levels and recharge if necessary. Verify connections.
Interference/Static noiseInterference from other wireless devices or selected channel is busy.Change the wireless channel on both the transmitter and receiver. Move away from other wireless devices.
Short range/Signal dropsObstructions between units, or excessive distance.Reduce distance between transmitter and receiver. Ensure clear line of sight.
Looper not recording/playingIncorrect footswitch operation.Refer to the "Looper Pedal Basic Functions" section for correct footswitch commands.

Specifications

  • Model: WS50
  • Brand: LEKATO
  • Audio Quality: 24-bit/48KHz uncompressed digital transmission
  • Latency: Less than 6ms
  • Range: Approximately 100 meters (effective range)
  • Battery Life: Up to 5 hours (after full charge)
  • Charging Port: Micro-USB
  • Looper Loops: 9
  • Single Loop Recording Time: Up to 10 minutes
  • Total Recording Time: 40 minutes
  • Plug Type: 1/4" (6.35mm) rotatable plug (220°)
  • Controls Type: Footswitch (for looper)
  • Hardware Interface: Bluetooth 5 (Note: This refers to internal communication, not direct Bluetooth audio connection to external devices)
  • Power Source: Corded Electric (for charging)

Warranty and Support

For warranty information and customer support, please refer to the official LEKATO website or contact your retailer. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.