onerbl AC/DC Adapter

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

onerbl 12V AC/DC Adapter for KeenPower C218 Series Tire Inflators User Manual

Model: AC/DC Adapter

1. Product Overview

This onerbl AC/DC adapter is designed to provide reliable power for compatible devices, specifically the KeenPower C218, C218Y, KPYC218, KPC218, and YC218KP 160PSI MAX Tire Inflator Air Compressors. It converts standard AC wall power into the necessary 12V DC power required by your device, enabling operation or battery charging from electrical outlets.

The adapter features over-voltage and over-heat protection to ensure safe and stable operation.

Front and side view of the onerbl 12V AC/DC Adapter

Image 1.1: Front and side view of the onerbl 12V AC/DC Adapter. This image displays the adapter's two-prong plug, the main body with ventilation slots, and the attached output cable. The label on the adapter shows "AC Adapter Input: 100-240VAC 0.3A 50/60Hz" and "MADE IN CHINA".

2. Safety Information

  • Read all instructions before use.
  • Do not expose the adapter to rain or moisture.
  • Do not disassemble the adapter. Refer all servicing to qualified personnel.
  • Ensure the adapter is used with devices that match its voltage and current specifications.
  • Avoid placing the adapter in areas with poor ventilation or near heat sources.
  • Unplug the adapter from the power outlet when not in use for extended periods.
  • Keep out of reach of children.

3. Setup

  1. Verify Compatibility: Ensure your device, such as a KeenPower C218 series tire inflator, requires a 12V DC power input.
  2. Connect to Device: Plug the DC output connector of the onerbl adapter into the corresponding power input port on your compatible device.
  3. Connect to Power Outlet: Insert the AC input plug of the adapter into a standard AC wall outlet (100-240V, 50/60Hz).
  4. Secure Connection: Ensure all connections are firm and secure before operating the device.
onerbl AC/DC Adapter connected to a power strip and a device

Image 3.1: The onerbl AC/DC Adapter plugged into a power strip, with its cable extending to connect to a compatible device. This illustrates a typical setup for use.

4. Operating Instructions

Once the adapter is correctly set up and connected to both the power outlet and your device, the device should receive power. Follow the specific operating instructions provided with your KeenPower tire inflator or other compatible device for its proper use.

  • The adapter provides continuous 12V DC power.
  • If your device has a battery, the adapter will charge it while simultaneously powering the device, if supported by the device.
  • Monitor your device's charging indicator (if applicable) to determine charging status.

5. Maintenance

  • Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
  • Storage: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adapter to prevent damage.
  • Inspection: Periodically inspect the adapter and its cable for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use and replace the adapter.

6. Troubleshooting

Problem Possible Cause Solution
Device not powering on/charging.
  • Adapter not properly plugged into outlet.
  • Adapter not properly connected to device.
  • Power outlet is not active.
  • Device is incompatible or faulty.
  • Adapter is faulty.
  • Ensure adapter is fully inserted into a working wall outlet.
  • Check the connection between the adapter and your device.
  • Test the outlet with another appliance.
  • Verify device compatibility and test the device with its original power source if available.
  • If all else fails, the adapter may need replacement.
Adapter feels excessively hot.
  • Poor ventilation.
  • Overload (device drawing too much power).
  • Internal fault.
  • Ensure adapter is in a well-ventilated area.
  • Verify your device's power requirements do not exceed the adapter's output.
  • Immediately unplug the adapter and discontinue use. Seek replacement.

7. Specifications

  • Brand: onerbl
  • Model: AC/DC Adapter
  • Input: AC 100-240V, 50/60Hz
  • Output: DC 12V
  • Compatible Devices: KeenPower C218, C218Y, KPYC218, KPC218, YC218KP 160PSI MAX Tire Inflator Air Compressors
  • Protection Features: Over Voltage Protection, Over Heat Protection
Dimensions of the onerbl 12V AC/DC Adapter and cable length

Image 7.1: This image displays the physical dimensions of the onerbl AC/DC Adapter, showing a length of 2.6 inches, width of 1.6 inches, and height of 1.2 inches. The cable length is indicated as 76 inches.

8. Warranty Information

This onerbl product is covered by a limited warranty against defects in materials and workmanship under normal use. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided at the time of purchase or contact customer support.

9. Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact onerbl customer support. Details for contacting support are typically found on the product packaging or the retailer's website where the product was purchased.

When contacting support, please be prepared to provide the product model (AC/DC Adapter) and a detailed description of the issue.

© 2024 onerbl. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.