MJX Hyper Go 14303 Brushless RC Drift Truck Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your MJX Hyper Go 14303 Brushless RC Drift Truck. Please read this manual thoroughly before operating the vehicle to ensure proper usage and to maximize your enjoyment.

The MJX Hyper Go 14303 is a 1/14 scale 4WD off-road racing car designed for high-speed performance and drift capabilities. It features a powerful brushless motor and a durable full metal transmission system.

2. Safety Information

WARNING: For use by persons over 14 years of age.

• Always operate the RC truck in open areas away from people, pets, and obstacles.
• Do not operate near water or in wet conditions to prevent damage to electronic components.
• Keep fingers, hair, and loose clothing away from moving parts.
• Ensure the battery is fully charged and properly installed before use.
• Never leave charging batteries unattended.
• Store the RC truck and its components in a cool, dry place when not in use.
• Use only original or recommended replacement parts.

3. Package Contents

Verify that all items are present in the package:

• RC Car (MJX Hyper Go 14303) x 1
• Remote Control x 1
• 7.4V 2000mAh 2S 25C LiPo Battery x 1
• USB Charging Cable x 1
• Hexagon Wrench x 1
• Screwdriver x 1
• TPR Tyre x 4 (Installed for racing)
• Drift Tyre x 4 (For drift performance)
• Instruction Manual x 1 (This document)

Image: Contents of the MJX Hyper Go 14303 package, including the RC car, remote control, brushless motor, two sets of tires (TPR and Drift), and the LiPo battery.

4. Specifications

Image: Detailed view of the internal components, including the brushless motor, ESC, receiver, and servo, highlighting the advanced electronics.

5. Setup Guide

5.1 Charging the Battery

1. Connect the provided USB charging cable to the 7.4V 2000mAh LiPo battery.
2. Plug the USB charging cable into a 5V 2A USB power adapter (not included).
3. The charging indicator light on the USB cable will show the charging status (e.g., red for charging, green for fully charged).
4. Charging typically takes about 4 hours. Do not overcharge the battery.

Image: The 7.4V 2000mAh 2S 25C LiPo battery, which powers the RC truck.

5.2 Installing the Battery

1. Locate the battery compartment on the underside of the RC truck.
2. Open the battery compartment cover.
3. Carefully insert the charged LiPo battery into the compartment, ensuring the connectors are aligned.
4. Connect the battery plug to the vehicle's power connector.
5. Securely close the battery compartment cover.

5.3 Installing Remote Control Batteries

1. Open the battery cover on the back of the remote control.
2. Insert two 1.5V AA batteries (not included) into the compartment, observing the correct polarity (+/-).
3. Close the battery cover securely.

5.4 Pairing the Remote Control

1. Turn on the RC truck by pressing the power button. The LED on the truck will blink.
2. Turn on the remote control. The indicator light on the remote will also blink.
3. Wait a few seconds for the remote control and the truck to automatically pair. The indicator lights on both devices will become solid when successfully paired.
4. If pairing fails, turn off both devices and repeat the process.

6. Operating Instructions

6.1 Basic Controls

• Steering Wheel: Turn left or right to control the direction of the truck.
• Throttle Trigger: Pull to accelerate forward, push to brake or reverse.
• Steering Trim: Adjust if the truck pulls to one side when the steering wheel is centered.
• Throttle Trim: Adjust if the truck moves forward or backward when the throttle trigger is centered.

6.2 Driving Tips

• Start slowly to get a feel for the controls before attempting high speeds.
• The truck is designed for both racing (with TPR tires) and drifting (with drift tires). Change tires according to your desired driving style.
• Practice steering and throttle control in an open area to master drifts and turns.
• The full metal hydraulic shock absorbers provide a smoother ride over rough terrain.

Image: The RC truck showcasing its two types of tires (rubber for grip, drift for sliding) and internal metal differential and bearings for enhanced durability and performance.

Image: Detailed view of the metal oil-filled shocks, which contribute to the truck's stability and handling on various surfaces.

6.3 Official Product Video

7. Maintenance

• Cleaning: After each use, especially after driving in dusty or dirty conditions, clean the truck with a soft brush or compressed air. Avoid using water directly on electronic components.
• Inspecting Components: Regularly check for loose screws, damaged wires, or worn-out parts. Tighten screws as needed.
• Lubrication: Periodically lubricate moving parts like gears and bearings with RC-specific lubricant to ensure smooth operation and extend lifespan.
• Battery Care: Store LiPo batteries in a cool, dry place and at a storage voltage (around 3.8V per cell) if not used for extended periods. Do not fully discharge or overcharge.
• Tire Maintenance: Clean tires and check for wear. Replace worn tires to maintain optimal performance.

Image: The RC truck with its body removed, revealing the chassis and the protective dust cover over the electronics, emphasizing ease of maintenance and component access.

8. Troubleshooting

9. Warranty and Support

For warranty information, technical support, or replacement parts, please contact TesPower customer service through the retailer where the product was purchased or visit the official TesPower website. Please have your model number (MJX 14303) and purchase date ready when contacting support.

For further assistance, you may refer to the TesPower Store on Amazon.