1. Safety Information
Please read and understand all instructions before beginning assembly and use. Failure to follow these instructions may result in injury or product damage. Keep this manual for future reference.
- Weight Limit: Do not exceed the maximum weight limit of 400 LBS. Exceeding this limit may cause structural damage or injury.
- Assembly: Proper assembly is essential to prevent accidents or injuries. Ensure all parts are securely fastened before use.
- Bedding: Always use appropriate bedding materials, especially for infants and young children, to prevent suffocation hazards.
- Tools: Avoid using power tools during assembly as they may overtighten fasteners and damage the product. Hand tools are recommended.
- Supervision: Children should be supervised when near the bed, especially during play.
- Maintenance: Regularly check all connections and fasteners to ensure they remain tight.
2. Product Overview
The Bellemave Pink Princess Platform Bed features a distinctive crown-shaped headboard, upholstered in a combination of plywood, MDF, and PU material. Designed for full-size mattresses, this platform bed includes slat supports, eliminating the need for a box spring. Its sturdy construction ensures durability and comfort.
Image 2.1: The Bellemave Pink Princess Platform Bed with Crown Headboard, showcasing its design in a bedroom setting.
3. Product Dimensions
Refer to the diagram below for detailed product dimensions to ensure proper fit and space planning.
- Overall Product Dimension: 80"L X 61.5"W X 44"H
- Recommended Mattress Thickness: 6"
Image 3.1: Detailed dimensional drawing of the Bellemave Pink Princess Platform Bed, including length, width, and height measurements.
4. Assembly Instructions
This product requires full assembly. An estimated time of 1 hour is suggested for two people. All necessary tools are included. Please ensure all components are present before starting.
4.1. Components Overview
The bed frame consists of a crown headboard, side rails, footboard, support legs, and wooden slats. Hardware typically includes bolts, washers, and an Allen wrench.
Image 4.1: Front view of the bed frame, showing the headboard, side rails, and slat support system.
4.2. Step-by-Step Assembly
- Unpack and Identify: Carefully unpack all components and hardware. Compare them with the parts list (not provided in detail here, refer to packaging for specific part identification) to ensure nothing is missing.
- Attach Headboard Legs: Secure the support legs to the headboard using the provided hardware.
- Connect Side Rails: Attach the side rails to the headboard and footboard. Ensure all connections are snug but do not overtighten initially.
- Install Center Support: If applicable, install any center support beams or legs for added stability.
- Place Slats: Lay the wooden slats across the side rails. Ensure they are evenly spaced and secured according to the instructions on the packaging.
Image 4.2: Close-up of the crown headboard and the wooden slat system, illustrating the mattress support structure.
- Final Tightening: Once all components are in place, go back and securely tighten all bolts and fasteners. Do not use power tools.
- Placement: Position the assembled bed in its desired location.
5. Usage and Care
5.1. Proper Usage
- Ensure the mattress is properly seated on the slats.
- Avoid jumping on the bed, as this can damage the frame and slats.
- Do not allow children to play unsupervised on or around the bed.
5.2. Maintenance
- Cleaning: The upholstered parts of the bed should be Dry Clean Only. For general cleaning, gently wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Fasteners: Periodically check all bolts and screws to ensure they are tight. Loose fasteners can compromise the bed's stability and safety.
- Environment: Keep the bed away from direct sunlight and excessive moisture to prevent material degradation.
6. Troubleshooting
This section addresses common issues you might encounter with your bed frame.
- Squeaking Noises: If the bed makes squeaking noises, check all bolts and connections. Tighten any loose fasteners. Ensure slats are properly seated and not rubbing against each other or the frame.
- Unstable Frame: If the bed feels wobbly, re-check all assembly steps, ensuring all hardware is correctly installed and tightened. Verify that the bed is on a level surface.
- Damaged Parts: If any part is damaged or missing upon arrival, do not proceed with assembly. Contact customer support immediately for assistance.
7. Product Specifications
| Feature | Specification |
|---|---|
| Product Type | Platform Bed |
| Size | Full |
| Color | Pink |
| Product Material | Plywood+MDF+PU |
| Number of Slats | 10 |
| Level of Assembly | Full assembly |
| Box Spring Required | No |
| Mattress Included | No |
| Estimated Time to Assemble | 1 hour (for 2 people) |
| Weight Capacity | 400 LBS |
| Recommended Mattress Thickness | 6" |
| Product Dimensions | 80"L X 61.5"W X 44"H |
| Upholstery Fabric Type | Polyurethane |
| Furniture Finish | White (Headboard accent) |
| Age Range (Description) | Child |
| Product Care Instructions | Dry Clean Only |
| Country of Origin | Vietnam |
8. Warranty Information
This Bellemave product comes with a One Year Limited Warranty covering manufacture defects. This warranty applies from the date of purchase. Please retain your proof of purchase for any warranty claims.
The warranty does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear.
9. Customer Support
If you have any questions, require assistance with assembly, or need to report missing or damaged parts, please contact Bellemave customer support. Refer to your purchase documentation or the Bellemave official website for contact details.
When contacting support, please have your product model name (Princess Platform Bed with Crown Headboard) and ASIN (B0CT5RP6SF) readily available.
