Introduction
This manual provides essential information for the safe and effective use of your Kircuit AC/DC Adapter. This adapter is designed to convert AC power into the DC power required by compatible devices, such as ThermaCell THS01 and THSRC-02 heated insoles. It allows you to operate your device or charge its battery from standard electrical power outlets. The adapter has been validated and tested to ensure compatibility and reliable performance with your specified devices.
Setup
Package Contents
- Kircuit AC/DC Adapter
Connecting the Adapter
- Ensure the power outlet is easily accessible and the adapter's specifications match your local power supply.
- Insert the adapter's barrel plug connector into the charging port of your ThermaCell THS01 or THSRC-02 heated insoles. Ensure a secure connection.
- Plug the AC prongs of the adapter into a standard 100V-240V AC electrical wall outlet.
- The device should now be receiving power or charging, indicated by its own charging indicator (if applicable).
Operating
Powering Your Device
Once connected to a power outlet and your compatible device, the Kircuit AC/DC Adapter will supply the necessary power. For charging, ensure your device's battery is properly inserted and its charging mechanism is active. The adapter is designed for continuous use within its specified voltage and current limits.
Maintenance
Care and Storage
- Cleaning: Disconnect the adapter from the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cord to prevent damage.
- Safety: Do not expose the adapter to water or excessive moisture. Do not attempt to open or repair the adapter yourself. If damaged, discontinue use and replace.
Troubleshooting
Common Issues
| Problem | Solution |
|---|---|
| Device not receiving power or charging. |
|
| Adapter feels unusually hot. |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Kircuit |
| Input Voltage | 100-240V AC, 50/60Hz, 0.3A |
| Output | Refer to adapter label for specific output (e.g., 5V DC, 1A) |
| Compatible Devices | THERMACELL THS01 THSRC-02 INSOLES THSRC02 ZAM-THS02 9559A-TXTHS02 ZAMTHS02 |
| Connector Type | Barrel Plug |
| Special Feature | Built-in Dynamic IC, Charger IC & Power fuse for overcharge protection |
| Color | Black |
| Power Source | Corded Electric |
| Cord Length | Approximately 6.5 ft (2 meters) |
Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt for any warranty claims.