Wildgame Innovations Terra Xtreme 16MP Trail Camera User Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Wildgame Innovations Terra Xtreme 16MP Trail Camera. Designed for scouting and monitoring wildlife, this camera captures high-quality images and videos with a fast trigger speed. Please read this manual thoroughly before using your camera to ensure optimal performance and longevity.

The Wildgame Innovations Terra Xtreme 16MP Trail Camera, shown from the front, featuring its durable, camouflage-patterned casing and integrated lens.

Package Contents

Verify that all items are present in your package:

• Wildgame Innovations Terra Xtreme 16MP Trail Camera
• Adjustable Tree Strap

Setup

1. Battery Installation

The Terra Xtreme 16MP camera requires 8 AA batteries (not included). For best performance, use high-quality alkaline or lithium batteries.

1. Open the camera housing by unlatching the side clips.
2. Locate the battery compartment at the bottom of the camera.
3. Insert 8 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment securely.

The camera's interior, with the battery compartment open at the bottom, ready for battery insertion. The SD card slot is visible above it.

2. SD Card Installation

A Class 4 or higher SD card (up to 32GB, not included) is required to store images and videos.

1. With the camera housing open, locate the SD card slot on the side of the internal display.
2. Insert the SD card with the label facing up until it clicks into place.
3. To remove, push the card in until it springs out.

3. Mounting the Camera

The camera comes with an adjustable tree strap for easy mounting.

1. Thread the adjustable tree strap through the slots on the back of the camera.
2. Secure the camera to a tree or post at the desired height and angle. Ensure the camera is stable and pointed towards the area you wish to monitor.
3. Alternatively, the camera features a 1/4-20 threaded insert on the bottom for use with a tripod or other mounting accessories.

The rear of the camera, highlighting the strap slots for secure mounting to a tree or post.

Operating the Camera

Powering On/Off

To power on the camera, slide the main switch to the 'ON' position. To power off, slide the switch to 'OFF'.

The camera's internal display and control buttons, including MENU, arrow keys, and ENTER, used for navigating settings.

Menu Navigation and Settings

Once powered on, the internal display allows you to configure camera settings. Use the 'MENU' button to access the settings, the arrow buttons to navigate options, and the 'ENTER' button to confirm selections.

• Setting Date and Time: It is crucial to set the correct date and time for accurate record-keeping. Navigate to the 'Date/Time' setting in the menu and adjust using the arrow keys.
• Mode Selection: Choose between Photo, Video, or Photo+Video modes.
• Trigger Delay: Adjust the delay between detections.
• Image/Video Resolution: Select your preferred resolution for captured media. The camera supports 16MP images and 1080p video.

Capturing Media

The Terra Xtreme features a fast 0.8-second trigger speed to ensure you capture fleeting moments. Once configured and armed, the camera will automatically capture images or videos when motion is detected within its range.

An example of a nighttime image captured by the trail camera, showing a deer in its natural habitat.

An example of a daytime image captured by the trail camera, featuring a coyote walking across a field.

Maintenance

• Battery Replacement: Replace batteries when the low battery indicator appears on the display or when performance degrades. Always replace all batteries at once with new ones.
• SD Card Management: Regularly check the SD card capacity. Format the SD card periodically to maintain optimal performance and prevent data corruption. Back up important media before formatting.
• Cleaning: Keep the camera lens and PIR sensor window clean and free of dirt, dust, or debris. Use a soft, lint-free cloth. Do not use abrasive cleaners.
• Storage: When not in use for extended periods, remove batteries and store the camera in a cool, dry place.

Troubleshooting

Specifications

Warranty and Support

Wildgame Innovations products are designed for durability and performance. For specific warranty details, please refer to the warranty information included with your product packaging or visit the official Wildgame Innovations website. For technical support or assistance, please contact Wildgame Innovations customer service. You can find contact information on the manufacturer's website or through your retailer.

For more information and products, visit the Wildgame Innovations Store on Amazon.