Important Safety Instructions
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Always secure the display shelf to the wall using the included anti-tip kit to prevent tipping and ensure stability and safety.
- Do not exceed the maximum weight capacity of 110 lbs (50 kg) for the entire unit. Distribute weight evenly across shelves.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Keep small parts and packaging materials away from children and pets to avoid choking hazards.
- Assemble the unit on a soft, clean surface to prevent scratches.
- If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
Parts List
Verify all components are present before beginning assembly. Refer to the included diagram for part identification.
| Part | Description | Quantity |
|---|---|---|
| A | Side Frames (Left/Right) | 2 |
| B | Middle Frame | 1 |
| C | Shelves | 5 |
| D | X-Brace Rods | 4 |
| E | Adjustable Feet | 4 |
| F | Screws (various sizes) | Assorted |
| G | Allen Wrench | 1 |
| H | Anti-Tip Kit | 1 |
Assembly Instructions
Follow these steps carefully to assemble your VASAGLE 5-Tier Bookshelf.
- Step 1: Attach Adjustable Feet
Screw the adjustable feet (E) into the bottom of the side frames (A) and middle frame (B). Ensure they are snug but allow for future adjustment. - Step 2: Assemble the Base Frame
Connect the bottom sections of the side frames (A) and the middle frame (B) using the appropriate screws (F). Ensure the frames form a stable L-shape or straight configuration as desired. - Step 3: Install X-Brace Rods
Attach the X-brace rods (D) to the designated holes on the back of the frame sections. These provide additional stability. Secure with screws (F).
Image: Installation of the reinforced X-shaped bars for stability.
- Step 4: Attach Shelves
Carefully place each shelf (C) onto the frame, aligning the pre-drilled holes with the screw holes on the frame. Secure each shelf with screws (F). Work from bottom to top, ensuring each shelf is level before proceeding.
Image: The completed 5-tier bookshelf, ready for use.
- Step 5: Install Anti-Tip Kit
Once the bookshelf is fully assembled and in its desired location, attach the anti-tip kit (H) to the top rear of the unit and secure it to the wall according to the kit's instructions. This is crucial for safety.
Image: Detail of the anti-tip kit installation for enhanced safety.
- Step 6: Adjust Leveling Feet
Adjust the leveling feet (E) as needed to ensure the bookshelf stands stable and level on uneven floors.
Image: Adjustable feet for leveling the bookshelf on uneven surfaces.
Operating Instructions
This bookshelf is designed for versatile storage in various rooms.
- Place books, decorations, plants, and other items on the shelves.
- Distribute heavier items on lower shelves to maintain stability.
- Avoid placing excessively heavy or oversized items that could compromise the unit's balance or structural integrity.
- The open design allows for easy access and display of your belongings.
Maintenance
Proper care will ensure the longevity of your bookshelf.
- Cleaning: Wipe with a dry cloth to remove dust and dirt. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Protection: Avoid prolonged exposure to direct sunlight or extreme humidity to prevent warping or fading of the particleboard shelves.
- Scratch Resistance: The quality panels are designed to be scratch-resistant, but avoid dragging sharp objects across the surface.
Image: Demonstrating the easy-to-clean and scratch-resistant surface of the shelves.
Troubleshooting
If you encounter any issues, refer to the following common solutions.
- Wobbly Bookshelf: Ensure all screws are tightened. Adjust the leveling feet (E) until the unit is stable on the floor. Confirm the anti-tip kit is securely installed.
- Missing Parts: Double-check all packaging materials. If parts are genuinely missing, contact customer support with your model number and a description of the missing part.
- Difficulty Aligning Holes: Loosen all screws slightly, align the parts, then gradually tighten all screws evenly. Do not overtighten.
Specifications
| Feature | Detail |
|---|---|
| Model Number | ULLS061B56 |
| Dimensions (D x W x H) | 11.8" x 26" x 60.2" (30cm x 66cm x 153cm) |
| Number of Tiers | 5 |
| Material | Alloy Steel, Engineered Wood (Particleboard) |
| Color | Ebony Black + Ink Black |
| Weight Capacity (Total) | 110 lbs (50 kg) |
| Mounting Type | Floor Mount (Freestanding with Anti-Tip Kit) |
| Special Features | Easy Assembly, Stable and Safe (X-brace, adjustable feet, anti-tip kit) |
| Product Weight | 29.1 lbs |
Dimensions are approximate and may vary slightly.
Image: Detailed dimensions of the bookshelf.
Warranty and Support
For warranty information, product support, or to report missing/damaged parts, please contact VASAGLE customer service. Refer to your purchase documentation for specific warranty terms and contact details.
You can typically find support information on the manufacturer's official website or through the retailer where the product was purchased.
