Coleman SaluSpa Sicily 180 AirJet Inflatable Hot Tub User Manual

Introduction

This manual provides essential instructions for the safe setup, operation, and maintenance of your Coleman SaluSpa Sicily 180 AirJet Inflatable Hot Tub. Please read this manual thoroughly before installation and use, and retain it for future reference.

This package includes the SaluSpa Sicily 180 AirJet Inflatable Hot Tub, four Bestway SaluSpa Spa Seats, and two sets of SaluSpa Padded Headrest Pillows.

Important Safety Information

WARNING: Failure to follow these instructions can result in serious injury or death.

• Always supervise children.
• Do not use an extension cord or multi-plug adapter.
• Connect to a grounded 110-120 V AC, 60Hz, Single Phase 12A receptacle.
• Ensure the grounded receptacle is resistant to humidity and capable of high-power loading. Consult an electrician if unsure.
• Regularly inspect the plug and socket for signs of damage. Do not plug back into the socket if damage is present.
• Maximum water temperature is 104°F (40°C).
• Pregnant women, individuals with heart disease, high blood pressure, diabetes, or other health conditions should consult a physician before use.
• Do not use the hot tub under the influence of alcohol, drugs, or medication.
• Exit the hot tub immediately if you feel uncomfortable, dizzy, or drowsy.
• Keep all electrical appliances away from the hot tub.

Package Contents

Verify that all components are present and undamaged before proceeding with setup.

• SaluSpa Sicily AirJet Inflatable Hot Tub
• Spa Pump with Control Panel
• EnergySense Insulated Cover
• ChemConnect Chemical Dispenser
• Filter Cartridge (Type VI)
• Repair Patch
• 4x SaluSpa Spa Seats
• 2x SaluSpa Padded Headrest Pillows

Setup Instructions

1. Site Selection

Choose a suitable location for your hot tub. The site must be:

• Level: A completely flat surface is crucial to prevent structural stress and potential collapse.
• Supportive: Capable of supporting the weight of the hot tub, water (approximately 314 gallons), and occupants (up to 7 people).
• Well-Drained: Ensure adequate drainage to prevent water accumulation around the hot tub.
• Proximity to Power: Within 12 feet of a grounded 3-prong outlet.
• Indoor Installation (Special Requirements): If installing indoors, ensure adequate ventilation to prevent humidity damage and consult an expert to confirm structural integrity.

2. Inflation

1. Unfold the hot tub liner on the selected level surface.
2. Connect the inflation hose from the spa pump to the hot tub's air valve.
3. Turn on the pump's inflation function. Inflate until the hot tub walls are firm but not rigid. Do not overinflate.
4. Disconnect the inflation hose and securely close the air valve.

3. Filling the Hot Tub

1. Ensure the drain valve is closed.
2. Fill the hot tub with fresh water using a garden hose. Fill to the recommended water level indicated on the inner wall of the hot tub.

4. Accessory Installation

Spa Seats

• Place the four SaluSpa Spa Seats on the bottom of the hot tub.
• Adjust the seat legs to your desired height (between 3.15 and 4.72 inches). The weighted feet will keep them in place.

Headrest Pillows

• Attach the two SaluSpa Padded Headrest Pillows to the rim of the hot tub using the adjustable straps.
• Position them for optimal comfort.

Operating Instructions

1. Control Panel Overview

The digital control panel allows you to manage all hot tub functions.

• Power Button: Turns the hot tub system on/off.
• Temperature Adjustment: Use the up/down arrows to set the desired water temperature (up to 104°F / 40°C).
• AirJet Button: Activates the 180 AirJet massage system.
• Filter Button: Turns the filtration system on/off.
• Heat Button: Activates the heating function.
• Timer Button: Sets the heating duration.

2. Heating the Water

1. Ensure the hot tub is filled to the correct level and the cover is in place to minimize heat loss.
2. Press the "Heat" button on the control panel.
3. Use the temperature adjustment arrows to set your desired temperature.
4. The Freeze Shield automatic heating function will activate if the ambient temperature drops too low, preventing internal components from freezing.

3. Activating AirJets

Once the water is heated, press the "AirJet" button to activate the 180 bubble jets for a soothing massage experience.

4. Using the EnergySense Cover

The EnergySense insulated cover is designed to speed up heating time and prevent heat loss, making the hot tub more energy efficient. Always keep the cover on when the hot tub is not in use.

5. Bestway Smart Hub App

For complete control from your smartphone, download the Bestway Smart Hub App. This app allows you to manage heating, set timers, control jet filtration, and more.

Maintenance

1. Water Chemistry

Maintaining proper water chemistry is essential for hygiene and longevity of your hot tub.

• Use the included ChemConnect chemical dispenser to evenly dispense chlorine.
• Regularly test the water pH and chlorine levels using a test kit.
• Adjust chemicals as needed to maintain recommended levels.

2. Filter Cartridge

The filter cartridge (Type VI) should be cleaned regularly and replaced every few weeks, depending on usage, to ensure efficient filtration.

1. Turn off the hot tub and disconnect power.
2. Remove the filter housing cover.
3. Remove the filter cartridge and rinse it thoroughly with a garden hose.
4. If the cartridge remains dirty or damaged, replace it with a new Type VI filter cartridge.
5. Reinstall the filter and cover.

3. Cleaning the Hot Tub

Periodically drain and clean the hot tub liner. Use a mild soap and water solution, then rinse thoroughly.

4. Storage

When storing the hot tub for an extended period:

• Drain all water completely.
• Clean and dry the hot tub thoroughly to prevent mold and mildew.
• Deflate the hot tub and fold it carefully.
• Store in a dry, temperate location, away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

• Brand: Bestway
• Model Name: SaluSpa Sicily 180 AirJet
• Model Number: 90519E-BW
• Product Dimensions: 77"L x 77"W x 28"H (Inflated)
• Inner Diameter: 65"
• Outer Diameter: 85"
• Material: DuraPlus (Polyvinyl Chloride - PVC)
• Shape: Round
• Capacity: 314 Gallons
• Seating Capacity: 5-7 people
• Number of AirJets: 180
• Maximum Water Temperature: 104°F (40°C)
• Power: 110-120 V AC, 60Hz, Single Phase 12A
• UPC: 193802354829

Warranty and Support

For warranty information, technical support, or replacement parts, please contact Bestway customer service. Keep your proof of purchase and model number (90519E-BW) readily available.

Bestway customer service contact information can typically be found on the product packaging or on the official Bestway website.

Bestway Company Description: Bestway Pools are designed for families, featuring no-tool assembly, durable puncture-resistant liners, and corrosion-resistant steel frames for sturdy backyard use.