Introduction
The NITECORE BB Nano is a compact and versatile electronic air blower designed for efficient dust removal from sensitive equipment such as cameras, lenses, and other electronics. Its portable design and powerful performance make it suitable for both indoor and outdoor use.
Image: The NITECORE BB Nano electronic air blower shown with its included NITECORE keychain tag.
Package Contents
- NITECORE BB Nano Electronic Air Blower
- NITECORE Keychain Tag
- USB-C Charging Cable (not explicitly listed but implied for rechargeable devices)
Note: Enhanced Cleaning Kit and Vacuum Attachment Kit are not included with the standard package.
Product Features
- Compact and Lightweight: Weighs only 99g (3.49 oz), designed for portability.
- Powerful Motor: Equipped with a 30W high-power motor and a 35mm integrated impeller with 18 spiral blades for efficient blowing performance.
- High Dust Removal Pressure: Delivers 2.6 kPa wind pressure, comparable to the NITECORE BB2 Air Blower.
- Unidirectional Air Intake: Prevents secondary damage to surfaces by ensuring clean air intake.
- High-Density Filter: Features a 250-mesh nylon filter, 25% denser than conventional 200-mesh filters, for meticulous dust filtration.
- Rechargeable Battery: Built-in 4.8Wh Li-ion battery provides approximately 90 cleaning times on a full charge.
- Durable Construction: Made from high-quality PC material with a detachable premium silicone nozzle.
- Optional Vacuuming Function: Compatible with optional vacuuming attachments (sold separately) to prevent dust from re-entering the air duct.
Image: Diagram illustrating the NITECORE BB Nano's 30W high-power motor and integrated impeller, highlighting its 2.6 kPa dust removal wind pressure.
Image: Comparison of the NITECORE BB Nano's 250-mesh nylon filter with a conventional 200-mesh filter, demonstrating superior dust filtration.
Image: Visual representation of the power indicator light: Green (Above 50%), Blue (Below 50%), Red (Below 10%).
Setup
1. Initial Charging
- Before first use, fully charge the BB Nano.
- Connect the included USB-C charging cable to the charging port on the device.
- Connect the other end of the cable to a USB power source (e.g., wall adapter, computer USB port).
- The power indicator light will show charging status and turn off when fully charged.
2. Attaching the Nozzle
- Ensure the silicone nozzle is securely attached to the blower's air outlet.
- The nozzle is detachable for cleaning or replacement.
Operating Instructions
Power On/Off
- To Power On: Press and hold the power button.
- To Power Off: Press and hold the power button again.
Cleaning Modes and Wind Speeds
The BB Nano offers two cleaning modes and two wind speed options:
- Fast Cleaning (High Wind Speed): Press and hold the power button to activate. This mode provides efficient cleaning.
- Constant Cleaning (Low Wind Speed): Double-press the power button to activate. This mode operates with minimal noise.
Image: Visual guide showing the two wind speed options (High for efficient cleaning, Low for minimal noise) and two cleaning modes (Fast Cleaning by pressing and holding, Constant Cleaning by double-pressing).
Usage Examples
- Photography Equipment: Use to remove dust from camera sensors, lenses, and camera bodies.
- Electronics: Ideal for cleaning keyboards, computer components, and other delicate electronics.
- General Dusting: Suitable for various indoor and outdoor dusting tasks.
Image: Using the BB Nano to clean a camera sensor.
Image: Using the BB Nano to clean a computer keyboard.
Image: Using the BB Nano to clean a car interior.
Image: Using the BB Nano for cleaning during outdoor photography.
Maintenance
1. Filter Cleaning/Replacement
- The 250-mesh nylon filter is designed to intercept fine dust.
- Regularly inspect the filter for accumulated dust.
- To clean, gently remove the filter and tap out any loose dust. If heavily soiled, it may be rinsed with water and thoroughly dried before reinstallation.
- Replace the filter if it becomes damaged or excessively clogged.
2. Nozzle Care
- The silicone nozzle is detachable.
- Clean the nozzle as needed to ensure unobstructed airflow.
3. Storage
- Store the BB Nano in a cool, dry place when not in use.
- Avoid exposing the device to extreme temperatures or direct sunlight.
Troubleshooting
- Device not turning on: Ensure the battery is charged. Connect to a power source and try again.
- Weak airflow: Check if the filter is clogged and clean or replace it. Ensure the nozzle is securely attached.
- Unusual noise: Discontinue use and inspect for any obstructions in the air intake or nozzle. If the issue persists, contact customer support.
Specifications
| Model | BB nano |
| Brand | Nitecore |
| Item Weight | 3.49 ounces (99 Grams) |
| Package Dimensions | 5.47 x 4.17 x 2.24 inches |
| Material | Silicone (nozzle), PC (body) |
| Power | 30W High Power Motor |
| Dust Removal Wind Pressure | 2.6 kPa |
| Battery | Built-in 4.8Wh Li-ion battery (1 Lithium Polymer battery included) |
| Filter Type | 250-mesh nylon filter |
Safety Information
- Do not point the air blower directly at eyes or sensitive body parts.
- Keep out of reach of children.
- Do not immerse the device in water or expose it to excessive moisture.
- Use only the specified charging cable and power source.
- Avoid disassembling or modifying the device, as this may void the warranty and pose safety risks.
- Ensure the air intake is not blocked during operation to prevent overheating.
Warranty and Support
For warranty information and customer support, please refer to the official NITECORE website or contact your local distributor. Keep your purchase receipt as proof of purchase.
Manufacturer: SYSMAX Innovations Co., Ltd.
