Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Aneken Pro AL931 Mixed Denomination Money Counter Machine. Please read this manual thoroughly before operating the device to ensure proper function and longevity.

Figure 1: Aneken Pro AL931 Mixed Denomination Money Counter Machine. The machine is shown with a stack of banknotes in the input hopper and an external display unit.
Package Contents
Upon opening the package, verify that all the following items are included:
- Aneken Pro AL931 Money Counter Machine
- Power Cord
- User Manual (this document)
- Cleaning Brush
- Spare Fuse
- External Display (optional, may vary by package)

Figure 2: Package contents including the money counter, power cord, user manual, cleaning brush, spare fuse, and external display.
Setup
- Unpacking: Carefully remove the money counter from its packaging. Retain the packaging for future storage or transport.
- Placement: Place the machine on a stable, flat, and dry surface, away from direct sunlight, heat sources, or excessive dust. Ensure adequate ventilation around the unit.
- Power Connection: Connect the power cord to the power input port on the back of the machine, then plug the other end into a standard electrical outlet.
- External Display (Optional): If your package includes an external display, connect its cable to the designated port on the rear of the money counter.
- Power On: Press the power switch, usually located on the back or side of the machine, to turn on the device. The touch screen will illuminate.
Operating Instructions
Basic Operation
- Loading Banknotes: Fan out the banknotes and place them neatly into the input hopper. Ensure the notes are aligned and not folded or crumpled.
- Starting Count: The machine will typically start counting automatically once banknotes are detected in the hopper. Alternatively, press the START button on the control panel.
- Viewing Results: The 4.5-inch touch screen will display the count results, including the total number of pieces and the total value for mixed denominations.
- Collecting Banknotes: Once counting is complete, collect the banknotes from the output stacker.

Figure 3: The 4.5-inch touch screen provides clear display of counting modes, currency, piece count, and total value.
Mixed Denomination Counting
The AL931 features advanced mixed denomination counting. Simply place a stack of mixed currency notes into the hopper. The machine will automatically identify each denomination and calculate the total sum.

Figure 4: The machine supports mixed denomination counting, automatically recognizing and summing various banknotes.
Currency Detection and Counterfeit Recognition
The AL931 utilizes 2CIS (Contact Image Sensor) technology along with multiple detection methods for bank-level anti-counterfeiting:
- UV (Ultraviolet) Detection: Checks for UV features on banknotes.
- MG (Magnetic) Detection: Verifies magnetic ink patterns.
- IR (Infrared) Detection: Scans for infrared security features.
- NT (Note Thickness) Detection: Measures banknote thickness.
- SN (Serial Number) Recognition: Records serial numbers for tracking.
- Fluorescence Analysis: Detects fluorescent properties.
- Color Changing Ink Verification: Checks for color-shifting ink.
- Dimensional Validation: Verifies banknote dimensions.
- Paper Quality Verification: Assesses the quality of the banknote paper.
When a suspicious note is detected, the machine will stop counting and alert the user. Remove the suspect note and resume counting.

Figure 5: The 2CIS technology integrates multiple detection points for comprehensive counterfeit analysis.
Supported Currencies
The Aneken Pro AL931 supports the calculation of over 120 currencies worldwide, including but not limited to USD, EUR, CAD, and MXN. The machine can handle multiple mixed denomination currencies simultaneously.
Menu and Settings
Access the machine's settings and various counting modes (e.g., Batch, Add, Sort) via the touch screen interface. Refer to the on-screen prompts for navigation and selection.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your money counter.
Cleaning
- Power Off: Always turn off and unplug the machine before cleaning.
- Dust Removal: Use the provided cleaning brush or a soft, dry cloth to remove dust and paper residue from the hopper, stacker, and internal sensors.
- Sensor Cleaning: Gently wipe the optical sensors and magnetic heads with a lint-free cloth lightly dampened with isopropyl alcohol. Allow to dry completely before use.
- External Cleaning: Wipe the exterior of the machine with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Software Updates
The Aneken Pro AL931 supports lifetime free system upgrades. Check the manufacturer's website or contact customer support for information on available software updates to ensure compatibility with new currency designs and enhanced features.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on. | Power cord not connected; Power switch off; Blown fuse. | Ensure power cord is securely connected; Turn on power switch; Replace fuse with spare (refer to manual for fuse location). |
| Banknotes jam frequently. | Banknotes are crumpled, folded, or not properly aligned; Dust/debris in the counting mechanism; Worn rollers. | Straighten and fan out banknotes before loading; Clean the machine thoroughly; Contact customer support if problem persists. |
| Inaccurate counting results. | Sensors are dirty; Banknotes are heavily worn or damaged; Incorrect currency selected. | Clean all sensors; Avoid counting severely damaged notes; Verify the correct currency is selected on the display. |
| Counterfeit detection errors. | Sensors are dirty; Banknotes are heavily worn or damaged; Software outdated. | Clean all sensors; Update machine software; Contact customer support for assistance. |

Figure 6: The internal structure is designed to minimize money jams. Regular cleaning helps maintain smooth operation.
Specifications
- Model: Aneken Pro AL931
- Counting Technology: 2CIS (Contact Image Sensor)
- Detection Methods: UV, MG, IR, NT, SN, Fluorescence Analysis, Color Changing Ink Verification, Dimensional Validation, Paper Quality Verification
- Supported Currencies: Over 120 currencies worldwide (e.g., USD, EUR, CAD, MXN)
- Display: 4.5-inch Touch Screen
- Material: Acrylonitrile Butadiene Styrene
- Features: Mixed Denomination Counting, Serial Number Recognition, Batching, Adding
Warranty and Support
Aneken provides a two-year warranty for the Pro AL931 Money Counter Machine. Additionally, lifetime technical support is available.
For any questions, technical assistance, or warranty claims, please contact Aneken customer support. You can typically find contact information on the manufacturer's official website or through your purchase platform.
Lifetime free system upgrades are provided without additional costs to ensure your machine remains up-to-date with new currency features and security enhancements.




