Introduction
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Scheppach C-DTB74/1-X Mobile Workshop 74-Piece All-In-One Set. Please read these instructions carefully before using the product and retain them for future reference.
Image 1: The Scheppach C-DTB74/1-X Mobile Workshop set, featuring the cordless drill/driver, battery, charger, and the comprehensive 74-piece accessory case.
Image 2: Visual representation highlighting the product's key attributes: lightweight and compact design (1.7 kg), mobility, its comprehensive 74-piece tool set, and its all-in-one functionality.
Safety Instructions
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep this manual for future reference.
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts.
- Personal Safety: Always wear eye protection. Use hearing protection when operating noisy tools. Dress properly; do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
- Power Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or remove the battery pack before making any adjustments, changing accessories, or storing power tools.
- Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.
Package Contents
The Scheppach C-DTB74/1-X Mobile Workshop includes a 74-piece set designed for versatility. Please verify that all components are present upon unpacking.
Image 3: A visual breakdown of the contents within the mobile workshop case, detailing the quantity and type of each accessory, including various drill bits, screwdriver bits, and hand tools.
Included Items:
- 1x Cordless Drill/Driver
- 1x 20 V / 2.0 Ah Lithium-Ion Battery
- 1x 2.4 A Battery Charger
- 1x Utility Knife
- 1x Carpenter's Pencil
- 1x Pencil Leads
- 1x Measuring Tape (5 m)
- 1x Center Punch
- 1x Wood Countersink
- 8x 1/4" Socket Adapters
- 5x Wood Drill Bits
- 14x Metal Drill Bits
- 10x Screwdriver Bits (75 mm long)
- 20x Screwdriver Bits (25 mm long)
- 10x Screwdriver Bits (50 mm long)
- 1x 1/4" Bit Holder
Setup
1. Battery Charging
- Connect the charger to a suitable power outlet (230-240V / 50Hz).
- Insert the 20V / 2.0Ah Lithium-Ion battery into the charger.
- The LED indicator on the charger will show the charging status. The charger features automatic switch-off once charging is complete.
- Allow the battery to fully charge before first use.
2. Attaching and Removing the Battery
- Attaching: Align the battery with the base of the drill/driver and slide it in until it clicks securely into place.
- Removing: Press the battery release button (if present) and slide the battery out from the drill/driver.
3. Inserting and Changing Accessories
- Ensure the drill/driver is switched off and the battery is removed for safety.
- Rotate the chuck counter-clockwise to open the jaws.
- Insert the desired drill bit or screwdriver bit into the chuck. Ensure it is inserted as far as possible.
- Rotate the chuck clockwise to tighten the jaws securely around the bit. Hand-tighten firmly.
Operating Instructions
1. Powering On/Off
To start the drill/driver, press the trigger switch. To stop, release the trigger switch. The tool features continuous speed adjustment based on trigger pressure.
2. Speed Adjustment (2-Gear Transmission)
The drill/driver is equipped with a 2-speed gearbox for optimal performance across different applications.
Image 4: Demonstrates the speed pre-selection mechanism via the powerful 2-speed gearbox, allowing users to choose between high torque (low speed) and high speed (low torque) settings.
- Gear 1 (Low Speed): For high torque applications such as driving large screws or drilling large diameter holes. (Nominal and Idle Speed: 0-400 rpm)
- Gear 2 (High Speed): For faster drilling and lighter screwdriving tasks. (Nominal and Idle Speed: 0-1550 rpm)
Use the gear selector switch located on top of the drill to select the desired speed range.
3. Torque Adjustment
The drill/driver offers 25 torque settings and 1 drilling mode, allowing precise control for various materials and applications.
Image 5: Illustrates the torque adjustment collar, which provides 25 distinct torque levels and a dedicated drilling mode, enabling precise operation tailored to the material and application.
- Rotate the torque adjustment collar, located behind the chuck, to select the desired setting.
- Lower settings are for driving small screws into soft materials to prevent overtightening or stripping.
- Higher settings are for driving larger screws or into harder materials.
- Select the drill symbol for drilling applications, which bypasses the clutch for maximum power.
4. LED Work Light
The integrated LED work light illuminates the work area, providing optimal visibility even in poor lighting conditions.
Image 6: A practical LED work light ensures optimal illumination, even in challenging lighting conditions, enhancing precision and safety during operation.
Maintenance
1. Cleaning
- Always disconnect the battery before cleaning.
- Keep the ventilation openings of the tool clean to prevent overheating.
- Wipe the tool with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
2. Battery Care
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not store batteries in a discharged state for extended periods. Recharge them periodically if not in use.
- The 20V Lithium-Ion battery is protected against self-discharge and free from memory effect.
3. Accessory Storage
Utilize the sturdy carrying case for organized storage of all accessories, protecting them from damage and ensuring they are readily available for use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Battery not charged or improperly inserted. | Ensure battery is fully charged and correctly inserted. |
| Reduced power or speed | Battery low on charge. Incorrect gear/torque setting. | Recharge battery. Adjust gear or torque setting appropriately. |
| Bit slips in chuck | Chuck not tightened sufficiently. | Ensure bit is fully inserted and chuck is hand-tightened firmly. |
| Overheating | Blocked ventilation openings. Prolonged heavy use. | Clean ventilation openings. Allow tool to cool down. Reduce load. |
Specifications
| Specification | Value |
|---|---|
| Model | Scheppach Mobile Workshop C-DTB74/1-X |
| Dimensions (L x W x H) | 230 x 80 x 190 mm (9.06"L x 3.15"W x 7.48"H) |
| Tool Box Contents | 74 pcs |
| Motor Type | Brush Motor |
| Max. Torque | 50 Nm |
| Torque Adjustment | 25+1 (Drilling Mode) |
| Chuck Diameter | 1.5-13 mm |
| Nominal and Idle Speed (1st gear) | 0-400 rpm |
| Nominal and Idle Speed (2nd gear) | 0-1550 rpm |
| Locking Function | Automatic |
| Battery Voltage / Capacity | 20V / 2.0Ah Lithium-Ion |
| Battery Charger Input | 230-240V / 50Hz / 2.4A |
| Weight Net / Gross (Including Battery) | 5.2 / 5.6 kg (11.44 pounds) |
| Item Model Number | 5909315900 |
Image 7: Performance comparison of 2.0 Ah and 4.0 Ah batteries, showing the number of screws (4x35mm in softwood) and holes (6x50mm in brick) achievable per battery charge. Performance may vary based on external conditions.
Warranty and Support
For warranty information, please refer to the warranty card included with your product or contact Scheppach customer service. Keep your purchase receipt as proof of purchase.
For technical support, spare parts, or service inquiries, please contact your local Scheppach dealer or visit the official Scheppach website for contact details.
Image 8: Illustrates the Scheppach 20V IXES battery platform, emphasizing that 'ONE BATTERY FOR ALL DEVICES' is compatible with a wide range of Scheppach tools.
Image 9: Depicts various environments where the mobile workshop is suitable for use, including home, garden, construction sites, automotive tasks, and camping.
