onerbl 24V AC/DC Power Adapter Instruction Manual

Introduction

This manual provides essential instructions for the safe and effective use of your onerbl 24V AC/DC Power Adapter. This adapter is designed to provide power to compatible devices, specifically the SUNSMAI SWLR0001 Smart Window Vacuum Cleaner Robot. Please read this manual thoroughly before use and retain it for future reference.

Important Safety Instructions

• Ensure the power adapter is used with devices that match its voltage and wattage specifications (Input: AC 100-240V, 50/60Hz; Output: DC 24V, 80W).
• Do not expose the adapter to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the adapter to strong impacts.
• Do not attempt to open or modify the adapter. Refer all servicing to qualified personnel.
• Unplug the adapter from the power outlet when not in use for extended periods.
• Keep out of reach of children.
• This adapter features over voltage protection and over heat protection for safe operation.

Package Contents

Verify that all items are present in the package:

• onerbl 24V AC/DC Power Adapter
• AC Power Cord (2-pin)

Image Description: A black onerbl 24V AC/DC power adapter with its attached DC output cable, alongside a separate black AC power cord with a two-prong plug on one end and a two-hole connector on the other. The adapter has a small blue indicator light.

Setup Instructions

1. Connect the AC Power Cord: Insert the 2-pin connector of the AC power cord firmly into the corresponding port on the onerbl 24V AC/DC Power Adapter.
2. Connect to Device: Plug the DC output connector of the power adapter into the power input port of your SUNSMAI SWLR0001 Smart Window Vacuum Cleaner Robot. Ensure a secure connection.
3. Connect to Power Outlet: Insert the AC plug of the power cord into a standard wall power outlet (AC 100-240V, 50/60Hz).
4. Verify Power: The blue indicator light on the power adapter should illuminate, indicating that power is being supplied.

Image Description: The onerbl 24V AC/DC power adapter is shown plugged into a wall outlet, with its output cable connected to a device (likely the vacuum cleaner robot, though not fully visible) on a wooden table. A small blue light on the adapter is illuminated.

Operating Instructions

The onerbl 24V AC/DC Power Adapter functions as a power supply for your compatible device. Once properly connected and plugged into a power source, it will deliver the necessary power. Refer to your device's instruction manual for specific operating procedures.

• Ensure the adapter is always connected to a stable power source.
• Do not overload the adapter by connecting it to devices requiring more than 80W.
• The adapter is designed for continuous use within its specified parameters.

Care and Maintenance

• Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the surface of the adapter. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cables to prevent damage.
• Inspection: Periodically inspect the adapter and cables for any signs of damage, such as frayed wires or cracked casing. If damage is observed, discontinue use and replace the adapter.

Troubleshooting

Specifications

Image Description: A diagram illustrating the dimensions of the power adapter and its cables. The adapter measures 4.2 inches in length. The DC output cable is 44.3 inches long, and the AC input cable is 79.3 inches long, totaling 127.8 inches.

Warranty and Support

For warranty information or technical support, please refer to the seller's policy or contact the manufacturer directly. Details are typically available on the product packaging or the point of purchase.

Manufacturer: Shenzhen Waweis Technology Co., Ltd