Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Bulbrite 862658 4-inch Integrated LED Wafer Recessed Trim. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image 1: An illustration of the Bulbrite 4-inch LED recessed trim installed in a ceiling, demonstrating its intended application in various indoor settings, particularly for recessed lighting.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
CAUTION: Risk of fire. Use only in accordance with the National Electrical Code (NEC) and local codes. If you are unsure about wiring, consult a qualified electrician.
- Ensure all electrical connections are secure and correct.
- Do not modify the fixture.
- Suitable for damp locations.
- Operating temperature range: -20°C to 40°C (-4°F to 104°F).
Package Contents
Verify that all components are present before beginning installation.
- Bulbrite 862658 4-inch Integrated LED Wafer Recessed Trim (4 units)
- Remote Metal J-Box (4 units)
- Instruction Manual (this document)
Image 2: Overview of four Bulbrite 4-inch Integrated LED Wafer Recessed Trims, each with its remote junction box. These units are designed for low-profile installation.
Setup and Installation
This fixture is designed for both retrofit and new construction applications. No housing is required.
Tools Required (Not Included):
- Screwdriver
- Wire strippers
- Measuring tape
- Hole saw (appropriate size for 4-inch fixture)
Installation Steps:
- Turn Off Power: Before starting any electrical work, ensure the power supply to the installation area is turned off at the circuit breaker or fuse box.
- Cut Hole: Using a hole saw, cut a circular opening in the ceiling at the desired location. Ensure the hole size is appropriate for a 4-inch recessed fixture. Refer to the dimensions image for precise measurements.
Image 3: A single Bulbrite 4-inch LED recessed trim with its remote junction box, illustrating key dimensions: 4.96 inches in diameter and 1.69 inches in height. This helps determine the required ceiling cutout size.
- Connect Wiring: Open the remote metal J-Box. Connect the building's electrical wires to the wires inside the J-Box using appropriate wire connectors (not included).
- Connect the black (hot) wire from the building to the black wire in the J-Box.
- Connect the white (neutral) wire from the building to the white wire in the J-Box.
- Connect the green or bare copper (ground) wire from the building to the green wire in the J-Box.
Image 4: A detailed view of a single Bulbrite 4-inch LED recessed trim, highlighting the remote junction box and the flexible conduit connecting it to the light fixture. This illustrates where electrical connections are made.
- Place J-Box: Insert the remote J-Box through the ceiling cutout and place it above the ceiling.
- Install Fixture: Push the spring clips on the side of the recessed trim upwards and insert the fixture into the ceiling cutout. Release the clips; they will secure the fixture firmly against the ceiling.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Operating Instructions
The Bulbrite 862658 LED Wafer Recessed Trim is designed for simple operation.
- Power On/Off: Control the light using a standard wall switch connected to the circuit.
- Dimming: This fixture is fully dimmable. For optimal performance, use with compatible LED dimmers. Refer to the dimmer manufacturer's instructions for specific wiring and operation.
Image 5: An installed Bulbrite 4-inch LED recessed trim in a bedroom setting, demonstrating the soft white light output (3000K CCT). This illustrates the aesthetic and functional result of the installation.
Maintenance
The Bulbrite 862658 LED fixture requires minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
- No User-Serviceable Parts: The integrated LED is not replaceable. Do not attempt to open or repair the fixture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wiring connection. Faulty switch. | Check circuit breaker. Verify all wire connections are secure (ensure power is off first). Test the switch. |
| Light flickers or dims improperly. | Incompatible dimmer switch. Loose wiring. | Ensure dimmer is compatible with LED fixtures. Check wiring connections (ensure power is off first). |
| Light is not as bright as expected. | Dimmer setting too low. Incorrect fixture for application. | Adjust dimmer to maximum brightness. Verify fixture specifications meet lighting requirements. |
Specifications
Key technical details for the Bulbrite 862658 4-inch Integrated LED Wafer Recessed Trim.
| Feature | Detail |
|---|---|
| Model Number | 862658 |
| Wattage | 12 Watts |
| Lumens | 1100 Lumens |
| Color Temperature | 3000K (Soft White Light) |
| Color Rendering Index (CRI) | 80 |
| Voltage | 120 Volts |
| Average Hours | 50,000 hours |
| Dimmable | Yes |
| Material | Metal |
| Finish | White Round Smooth Trim |
| Dimensions (Diameter x Height) | 4.96" x 1.69" (approximate) |
| UPC | 739698864280 |
Image 6: A "Lighting Facts" label providing key performance metrics for the Bulbrite LED fixture, including brightness (1100 lumens), energy usage (12 watts), light appearance (3000K Soft White), and estimated lifespan (45.7 years).
Image 7: An informational graphic illustrating various light temperatures, from Amber (2100K) to Daylight (5000K), with Soft White (3000K) highlighted. This helps users understand the color temperature of this specific fixture.
Warranty and Support
Bulbrite offers a limited warranty for this product.
- Warranty Period: 5 years from the date of purchase.
- Coverage: This warranty covers defects in materials and workmanship under normal use.
- Contact Support: For warranty claims or technical assistance, please contact Bulbrite customer service. Refer to the official Bulbrite website for the most current contact information.
- Manufacturer: Bulbrite Industries Inc., 15 West Commercial Avenue, Moonachie, NJ 07074.
For additional information or support, please visit the Bulbrite Store on Amazon or the official Bulbrite website.
Image 8: The product packaging for the Bulbrite 4-inch LED Recessed Downlight, displaying key features such as 84% energy savings, 1100 lumens, 3000K soft white light, and a 5-year limited warranty. This image provides a summary of product benefits and warranty details.
