1. Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Vicco Dominic Bar Table Set with 2 Bar Stools. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
The Vicco Dominic Bar Table Set is designed to offer a functional and stylish solution for dining or casual use in various living spaces. It features a compact design with integrated storage and includes two adjustable bar stools.
Image 1.1: The Vicco Dominic Bar Table Set, featuring a white bar table and two white bar stools.
2. Safety Information
- Always follow the assembly instructions carefully.
- Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten as necessary.
- Do not overload the table or shelves. Refer to specifications for weight limits if available.
- Keep small parts away from children during assembly to prevent choking hazards.
- Use on a flat, stable surface to prevent tipping.
3. Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
- Bar Table components
- 2 Bar Stools (disassembled)
- Assembly hardware (screws, dowels, connectors, etc.)
- Assembly Instructions (this document)
4. Setup and Assembly
Assembly requires basic household tools (e.g., screwdriver, hammer). It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
4.1 Bar Table Assembly
- Unpack Components: Carefully remove all parts from the packaging. Lay them out and identify each piece. Note: Some users have reported that parts may not be individually labeled, requiring careful identification based on diagrams.
- Assemble the Main Frame: Follow the provided diagrams to connect the side panels and base supports using the designated hardware. Ensure all connections are snug but do not overtighten.
- Install Shelving: Insert the internal shelves and the door mechanism according to the diagrams. The table features four open shelves and one closed compartment with a door.
- Attach Tabletop: Secure the main tabletop to the assembled frame. The table includes a foldable extension. Ensure the hinge mechanism for the foldable section is correctly installed and operates smoothly.
Image 4.1: Detailed dimensions of the bar table and stools, illustrating internal storage layout.
Image 4.2: The bar table shown with its top in both folded (compact) and extended positions.
4.2 Bar Stool Assembly
- Base Assembly: Attach the footrest to the central pole.
- Seat Attachment: Secure the seat cushion to the top of the central pole.
- Hydraulic Mechanism: Ensure the hydraulic lift mechanism is correctly inserted and functional for height adjustment.
5. Operating Instructions
5.1 Using the Bar Table
- Extendable Top: The table features a foldable section. To extend, gently lift and pull out the hinged section until it locks into place. To retract, reverse the process.
- Storage: Utilize the four open shelves and the closed compartment for storing kitchen items, bar accessories, or decorative objects.
Image 5.1: The bar table demonstrating its storage capacity with various items.
5.2 Using the Bar Stools
- Height Adjustment: To adjust the stool height, lift the lever located under the seat while seated (to lower) or while standing (to raise).
- Swivel Function: The stools are designed to swivel 360 degrees for ease of movement.
6. Maintenance
Proper care will extend the life and appearance of your Vicco Dominic Bar Table Set.
- Cleaning: Wipe surfaces with a damp cloth and a mild detergent. Avoid abrasive cleaners or harsh chemicals that could damage the melamine coating.
- Spills: Clean up spills immediately to prevent staining or damage to the material.
- Hardware Check: Periodically inspect all screws and fasteners for tightness. Re-tighten as needed to maintain stability.
- Stool Care: For the metal parts of the stools, use a soft cloth and a non-abrasive metal cleaner if necessary.
7. Troubleshooting
- Difficulty during assembly: If you encounter difficulty identifying parts or steps, carefully review the diagrams in the assembly instructions. Ensure you are using the correct hardware for each step. If issues persist, contact customer support.
- Wobbly table/stools: Check that all screws and fasteners are fully tightened. Ensure the furniture is placed on a level surface.
- Stool height adjustment not working: Verify that the hydraulic lever is fully engaged and that there are no obstructions in the mechanism. If the issue persists, the hydraulic cylinder may need replacement.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Vicco |
| Model Number | 16801 (also 41544) |
| Color | White |
| Bar Table Dimensions (L x W x H) | 116 x 37 x 90.5 cm (45.7 x 14.6 x 35.6 inches) |
| Bar Stool Dimensions (Seat Diameter x Height) | 33 cm (13 inches) diameter, adjustable height 71-92 cm (28-36.2 inches) |
| Total Weight | Approximately 55.25 kg (121.8 lbs) |
| Material | Engineered wood (16mm particle board with melamine resin coating), Metal, Polyurethane (stool seats) |
| Storage | 4 open shelves, 1 closed compartment with door |
| Features | Foldable tabletop, adjustable height bar stools, swivel function |
9. Warranty and Support
9.1 Warranty Information
Specific warranty details for the Vicco Dominic Bar Table Set are not provided in the product information. Please refer to your purchase documentation or contact the retailer/manufacturer directly for warranty terms and conditions.
9.2 Customer Support
For any questions, missing parts, or assistance with assembly or operation, please contact the seller, ok-living, or the manufacturer, Vicco. Contact information can typically be found on your purchase receipt or the seller's platform.