UPBRIGHT Model TY1200150A1mn Power Supply
UpBright 12V AC/DC Adapter User Manual
Model: TY1200150A1mn Power Supply
Introduction
This manual provides essential information for the safe and efficient use of your UpBright 12V AC/DC Adapter. This adapter is designed to provide reliable power to compatible devices, such as Ottlite LED Desk Lamps and other devices requiring a 12V DC 1.5A power supply.
The UpBright AC/DC Adapter features a wide input voltage range (100-240VAC) and incorporates safety protections including Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure the safety of your devices.
Package Contents
Upon opening the package, please verify that all components are present and undamaged.
- 2 x UpBright 12V AC/DC Adapter (Model TY1200150A1mn Power Supply)
Figure 1: The UpBright 12V AC/DC Adapter, showing the main unit with the two-prong plug and the attached DC barrel connector cable.
Setup Instructions
- Verify Compatibility: Before connecting, ensure your device requires a 12V DC input with a current draw of 1.5A or less, and has a compatible barrel connector. This adapter is specifically compatible with devices such as Ottlite T5U, AY800Z, U13A, and COSTCO 2121850 LED Desk Lamps.
- Identify Connector: The adapter uses a standard DC barrel round connector.
- Check Polarity: It is crucial to match the polarity of the adapter's output to your device's input. This adapter features a center-positive polarity. Refer to your device's manual or input port for its required polarity.
- Connect to Device: Carefully insert the DC barrel connector of the adapter into the power input port of your compatible device. Ensure a snug fit.
- Connect to Power Outlet: Plug the AC prongs of the adapter into a standard 100-240VAC wall outlet.
- Power On Device: Once connected, power on your device as per its own operating instructions.
Figure 2: A close-up view of the DC barrel connector, which plugs into your compatible device.
Figure 3: Diagram illustrating correct (center-positive) and incorrect (center-negative) DC barrel connector polarity. Ensure your device matches the center-positive configuration shown on the left.
Operating Instructions
The UpBright AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable 12V DC output.
- The adapter is designed for continuous operation within its specified voltage and current limits.
- It is equipped with internal protection circuits (OVP, OCP, SCP) to safeguard both the adapter and your connected device from electrical anomalies.
- No user intervention is required for its basic operation.
Maintenance and Care
To ensure the longevity and optimal performance of your UpBright AC/DC Adapter, follow these simple maintenance guidelines:
- Cleaning: Disconnect the adapter from both the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Handling: Do not drop, disassemble, or attempt to repair the adapter. Avoid exposing it to water or high humidity.
- Ventilation: Ensure the adapter has adequate ventilation when in use. Do not cover it or place it in an enclosed space that could lead to overheating.
Troubleshooting
If you encounter issues with your UpBright AC/DC Adapter, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. |
|
|
| Adapter feels hot during use. |
|
|
If the problem persists after following these steps, please contact customer support.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | TY1200150A1mn Power Supply |
| Input Voltage | 100-240VAC, 50/60Hz (World Wide Input Voltage) |
| Output Voltage | 12V DC |
| Output Current | 1.5A (1500mA) |
| Connector Type | DC Barrel Round Connector |
| Polarity | Center Positive |
| Protection Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Dimensions (Product) | 4 x 3 x 2 inches |
| Item Weight | 4 ounces |
| Color | Black |
| Mounting Type | Wall Mount |
| Manufacturer | UpBright |
Warranty Information
UpBright products are backed by a commitment to quality. This product includes:
- 30 Days Refund Policy: If you are not satisfied with your purchase within 30 days, you may be eligible for a refund.
- 24 Months Exchange Policy: The product is covered by a 24-month exchange policy for manufacturing defects or performance issues.
For detailed terms and conditions, please refer to the warranty certificate included with your product or contact UpBright customer support.
Figure 4: An example of the UpBright Limited Warranty Certificate, which outlines the terms of the product warranty.
Customer Support
For technical assistance, warranty claims, or any other inquiries, please contact UpBright customer support through the following channels:
- Online: Visit the official UpBright store on Amazon: UPBRIGHT Store
- Refer to your product packaging or the warranty certificate for additional contact information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
